| |
|
 |
Maxim
|
| Part No. |
MAX1241EVKIT
|
| OCR Text |
...Carefully connect the boards by aligning the MAX1241 EV kit's 40-pin header with the 68L11D module's 40-pin connector. Gently press them together. The two boards should be flush against one another. 4) Connect a 5V DC power source (16V max)... |
| Description |
Evaluation Kit for the MAX1240/ MAX1241
From old datasheet system
|
| File Size |
1,405.90K /
16 Page |
 View
it Online |
Download Datasheet
|
| |
|
|
Zarlink
|
| Part No. |
MT8979 133
|
| OCR Text |
...acted 2048 kHz clock by 256 and aligning it with the received CEPT frame. The 8 kHz signal can be used for synchronizing the system clock to the extracted 2048 kHz clock. Only valid when device achieves synchronization (goes low during a lo... |
| Description |
ISO-CMOS ST-BUS? FAMILY
From old datasheet system
|
| File Size |
612.20K /
29 Page |
View
it Online |
Download Datasheet |
| |
|
|
MAXIM - Dallas Semiconductor
|
| Part No. |
MAX1202EVSYS MAX1202EVKIT-MAX1203EVKIT MAX1202EVKIT
|
| OCR Text |
...Carefully connect the boards by aligning the EV kit's 40-pin header with the C module's 40-pin connector. Gently press them together. The two boards should be flush against one another. 4) Connect a 9V to 15V DC power source to the C module... |
| Description |
Evaluation System for MAX1202/MAX1203
From old datasheet system
Evaluation System for MAX1202/ MAX1203
|
| File Size |
210.89K /
7 Page |
View
it Online |
Download Datasheet |
| |
|
|
MAXIM - Dallas Semiconductor
|
| Part No. |
MAX1132EVSYS MAX1132EVC16-MAX1133EVKIT MAX1133EVKIT MAX1132EVKIT
|
| OCR Text |
...Carefully connect the boards by aligning the 40-pin header of the MAX1132 EV kit with the 40-pin connector of the 68HC16MODULE-DIP module. Gently press them together. The two boards should be flush against one another. 2) Check the jumper s... |
| Description |
From old datasheet system
Evaluation System for the MAX1132/MAX1133
|
| File Size |
222.67K /
7 Page |
View
it Online |
Download Datasheet |
| |
|
|
Maxim
|
| Part No. |
MAX6640EVKIT
|
| OCR Text |
...Carefully connect the boards by aligning the 20-pin connector of the MAX6640 EV kit with the 20-pin header of the CMOD232 board. Gently press them together. 1) Disable the pullup resistors on the CMOD232 board by moving switch SW1 to the OF... |
| Description |
Evaluation System/Evaluation Kit for the MAX6640
From old datasheet system
|
| File Size |
413.26K /
14 Page |
View
it Online |
Download Datasheet |
| |
|
|
MAXIM - Dallas Semiconductor
|
| Part No. |
MXB7846EVSYS MXB7846EVKIT MXB7846EVKIT-MXB7846EVSYS
|
| OCR Text |
...Carefully connect the boards by aligning the 40-pin header of the MXB7846 EV kit with the 40-pin connector of the 68HC16MODULE-DIP module. Gently press them together. The two boards should be flush against one another. 3) With the power off... |
| Description |
Evaluation Kit/Evaluation System for the MXB7843/MXB7846
From old datasheet system
Evaluation Kit/ Evaluation System for the MXB7843/MXB7846
|
| File Size |
2,980.55K /
11 Page |
View
it Online |
Download Datasheet |
| |
|
|
IDT
|
| Part No. |
IDT2309 2309_DATASHEET
|
| OCR Text |
.... The zero delay is achieved by aligning the phase between the incoming clock and the output clock, operable within the range of 10 to 133MHz. The IDT2309 is a 16-pin version of the IDT2305. The IDT2309 accepts one reference input, and driv... |
| Description |
3.3V ZERO DELAY CLOCK BUFFER
From old datasheet system
|
| File Size |
132.57K /
10 Page |
View
it Online |
Download Datasheet |
| |
|
|
Maxim
|
| Part No. |
MAX6695EVKIT
|
| OCR Text |
...Carefully connect the boards by aligning the 20-pin connector of the MAX6695 EV kit with the 20-pin header of the CMOD232 board. Gently press them together. 2) Disable the pullup resistors on the CMOD232 board by moving switch SW1 to the OF... |
| Description |
Evaluation Kit/Evaluation System for the MAX6695
From old datasheet system
|
| File Size |
253.30K /
10 Page |
View
it Online |
Download Datasheet |
|
Price and Availability
|
