| |
|
 |
TE Connectivity Ltd
|
| Part No. |
23150-3 7-306105-5
|
| OCR Text |
... 6 4. activate power unit. raise ram to up position. inspect flat and round surfaces of ram for galling (fretting or wear by friction), cracks, or oil leakage. release pressure and make sure that ram retrac ts smoothly. 5. if h... |
| Description |
Hydraulic Crimping Head
|
| File Size |
634.78K /
8 Page |
 View
it Online |
Download Datasheet
|
| |
|
|
Sony
|
| Part No. |
ILX508A
|
| OCR Text |
...wering power supply voltage. To raise power supply voltage, first raise VDD1 (9V) and then VDD2 (5V). To lower voltage, first lower VDD2 (5V) and then VDD1 (9V).
Clock Characteristics Item Input capacity of CLK Input capacity of ROG Inpu... |
| Description |
7926-pixel CCD Linear Image Sensor (B/W)
From old datasheet system
|
| File Size |
197.54K /
14 Page |
View
it Online |
Download Datasheet |
| |
|
|
Mitsumi
|
| Part No. |
MM1225 MM1221 MM1226 MM1224 MM1227 MM1222 MM1228
|
| OCR Text |
...ltage on TP7 and TP8. Gradually raise from VC1=0V. TP5 voltage when TP8 voltage is output on TP2 is VIH1. Gradually lower from VC1=VCC. TP5 voltage when TP7 voltage is output on TP2 is VIL1. Impress an optional DC voltage on TP7 and TP9. Gr... |
| Description |
2-Input 1-Output Video Switch (75? driver)/3-Input 1-Output Video Switch (75? driver)
|
| File Size |
164.33K /
7 Page |
View
it Online |
Download Datasheet |
| |
|
|
Mitsumi
|
| Part No. |
MM1389
|
| OCR Text |
...-P, 100kHz sine wave to SG, and raise Switch input voltage H, L VIH VIL gradually from VC1=0V. TP4 voltage when the SG signal appears on TP2 is VIN. Next, reverse S10~S15 settings and lower gradually from VC1=VCC. TP4 voltage when the SG si... |
| Description |
Pedestal Clamp 2-Input 1-Output 3-Circuit Video Switch
|
| File Size |
152.38K /
7 Page |
View
it Online |
Download Datasheet |
| |
|
|
Mitsumi
|
| Part No. |
MM1118 MM1111 MM1117 MM1113 MM1112 MM1116 MM1115
|
| OCR Text |
...ltage on TP6 and TP7. Gradually raise from VC1=0V. TP4 voltage when TP7 voltage is output on TP2 is VIH1. Gradually lower from VC1=VCC. TP4 voltage when TP6 voltage is output on TP2 is VIL1. Impress an optional DC voltage on TP6 and TP8. Gr... |
| Description |
2-Input 1-Output Video Switch / 3-Input 1-Output Video Switch
|
| File Size |
155.64K /
10 Page |
View
it Online |
Download Datasheet |
| |
|
|
TE Connectivity Ltd
|
| Part No. |
306209-2
|
| OCR Text |
...t of yoke (see figure 2). 3. raise ram to full up position. 4. insert screwdriver under moving die and pry die out of ram. note latch pin kit 69709-4 is available as an accessory item. the latch pin is attached to the pivot pin by... |
| Description |
Hydraulic Crimping Head, PN 69067
|
| File Size |
280.12K /
6 Page |
View
it Online |
Download Datasheet |
|
Price and Availability
|
