| PART |
Description |
Maker |
| PTF041501F PTF041501E |
Thermally-Enhanced High Power RF LDMOS FETs 150 W, 450 - 500 MHz
|
Infineon Technologies AG
|
| UNCL-L1 |
Plug-In, Low Noise Active Mixer (Level -4(LO Power -4 dBm) 10 to 500 MHz) 10 MHz - 500 MHz RF/MICROWAVE DOUBLE BALANCED MIXER, 8.5 dB CONVERSION LOSS-MAX
|
Mini-Circuits
|
| ZFL-500 ZFL-500-BNC |
50Low Power 0.05 to 500 MHz 0.05 MHz - 500 MHz RF/MICROWAVE WIDE BAND LOW POWER AMPLIFIER
|
Mini-Circuits
|
| APTM50AM24SCG |
150 A, 500 V, 0.028 ohm, 2 CHANNEL, N-CHANNEL, Si, POWER, MOSFET
Phase leg Series & SiC parallel diodes MOSFET Power Module
|
Microsemi Corporation
|
| AD8367_05 AD8367 AD8367ARU AD8367ARU-REEL-7 AD8367 |
500 MHz, 45 dB Linear-in-dB Variable Gain Amplifier; Package: TSSOP; No of Pins: 14; Temperature Range: Industrial SPECIALTY ANALOG CIRCUIT, PDSO14
500 MHz, Linear-in-dB VGA with AGC Detector
|
Analog Devices, Inc.
AD[Analog Devices]
|
| ADC-26-52 |
Directional Coupler 50楼? 10 to 500 MHz
Directional Coupler 50惟 10 to 500 MHz
Directional Coupler 50Ω 10 to 500 MHz
|
Mini-Circuits
|
| SO-720-LPC-GBA-155.5200MHZ SO-720-LPC-GCA-155.5200 |
CLOCK SAW OSCILLATOR, 155.52 MHz ROHS COMPLIANT, HERMETIC SEALED, CERAMIC, SMD, 6 PIN
CLOCK SAW OSCILLATOR, 531.25 MHz ROHS COMPLIANT, HERMETIC SEALED, CERAMIC, SMD, 6 PIN
CLOCK SAW OSCILLATOR, 156.25 MHz ROHS COMPLIANT, HERMETIC SEALED, CERAMIC, SMD, 6 PIN
CLOCK SAW OSCILLATOR, 707.3527 MHz ROHS COMPLIANT, HERMETIC SEALED, CERAMIC, SMD, 6 PIN
CLOCK SAW OSCILLATOR, 690.5692 MHz ROHS COMPLIANT, HERMETIC SEALED, CERAMIC, SMD, 6 PIN
CLOCK SAW OSCILLATOR, 150 MHz - 1000 MHz ROHS COMPLIANT, HERMETIC SEALED, CERAMIC, SMD, 6 PIN
CLOCK SAW OSCILLATOR, 150 MHz ROHS COMPLIANT, HERMETIC SEALED, CERAMIC, SMD, 6 PIN
CLOCK SAW OSCILLATOR, 1000 MHz ROHS COMPLIANT, HERMETIC SEALED, CERAMIC, SMD, 6 PIN
CLOCK SAW OSCILLATOR, 312.5 MHz ROHS COMPLIANT, HERMETIC SEALED, CERAMIC, SMD, 6 PIN
CLOCK SAW OSCILLATOR, 187.5 MHz ROHS COMPLIANT, HERMETIC SEALED, CERAMIC, SMD, 6 PIN
CLOCK SAW OSCILLATOR, 175 MHz ROHS COMPLIANT, HERMETIC SEALED, CERAMIC, SMD, 6 PIN
CLOCK SAW OSCILLATOR, 160 MHz ROHS COMPLIANT, HERMETIC SEALED, CERAMIC, SMD, 6 PIN
CLOCK SAW OSCILLATOR, 194.8 MHz ROHS COMPLIANT, HERMETIC SEALED, CERAMIC, SMD, 6 PIN
CLOCK SAW OSCILLATOR, 320 MHz
CLOCK SAW OSCILLATOR, 720 MHz
CLOCK SAW OSCILLATOR, 500 MHz
|
Vectron International, Inc.
|
| ZLW-11 |
Frequency Mixer Level 7 (LO Power 7 dBm) 5 to 2000 MHz 0.1 MHz - 500 MHz RF/MICROWAVE DOUBLE BALANCED MIXER, 8.5 dB CONVERSION LOSS-MAX
0.1 MHz - 500 MHz RF/MICROWAVE DOUBLE BALANCED MIXER, 8.5 dB CONVERSION LOSS-MAX CASE M21
|
Mini-Circuits
|
| SBTC-2-15-75_75L SBTC-2-15-75 SBTC-2-15-75L SBTC-2 |
Surface Mount, Micro-Miniature Power Splitter/Combiners 2 Way-075з 500 to 1500 MHz 500 MHz - 1500 MHz RF/MICROWAVE COMBINER, 1.5 dB INSERTION LOSS
Surface Mount, Micro-Miniature Power Splitter/Combiners 2 Way-075з 500 to 1500 MHz 表面贴装，微小型电源分配合路2路，0Σ75з500年至1500兆赫
Surface Mount, Micro-Miniature Power Splitter/Combiners 2 Way-075з 500 to 1500 MHz 500 MHz - 1500 MHz RF/MICROWAVE SPLITTER AND COMBINER, 1.5 dB INSERTION LOSS
Surface Mount, Micro-Miniature Power Splitter/Combiners 2 Way-0° 75 500 to 1500 MHz
Surface Mount, Micro-Miniature Power Splitter/Combiners 2 Way-0∑ 75з 500 to 1500 MHz
Surface Mount/ Micro-Miniature Power Splitter/Combiners 2 Way-0 75 500 to 1500 MHz
|
MINI[Mini-Circuits]
|
| EH3720ETTTS-150.000M |
OSCILLATORS 20PPM -40 85 2.5V 4 150.000MHZ TS CMOS 5.0X3.2 4PAD SMD CRYSTAL OSCILLATOR, CLOCK, 150 MHz, LVCMOS OUTPUT
|
Ecliptek, Corp.
|
| HEDL-6442-AP01 HEDL-6442-AP02 HEDL-6402-AP01 HEDL- |
Optical Incremental Housed Encoders 光电编码器增量外
IND 3.3UH SMD 10% SHLD
Inductor; Inductor Type:Power; Inductance:10uH; Inductance Tolerance: /- 10 %; Current Rating:279mA; Series:ISC; Package/Case:1812; Core Material:Powdered Iron; Leaded Process Compatible:Yes; Mounting Type:Surface Mount RoHS Compliant: Yes
HEDL-6442-IP01 · Three channel encoder with 512 cpr and 2 mm shaft size
HEDL-6442-IP02 · Three channel encoder with 512 cpr and 3 mm shaft size
HEDL-6442-IT01 · Three channel encoder with 512 cpr and 2 mm shaft size
HEDL-6442-IT02 · Three channel encoder with 512 cpr and 3 mm shaft size
HEDL-6402-AT01 · Two channel encoder with 500 cpr and 2 mm shaft size
HEDL-6402-AT02 · Two channel encoder with 500 cpr and 3 mm shaft size
HEDL-6402-AT11 · Two channel encoder with 500 cpr and 4 mm shaft size
HEDL-6402-IT01 · Two channel encoder with 512 cpr and 2 mm shaft size
HEDL-6402-IT02 · Two channel encoder with 512 cpr and 3 mm shaft size
HEDL-6403-IT01 · Two channel encoder with 512 cpr and 2 mm shaft size
HEDL-6403-IT02 · Two channel encoder with 512 cpr and 3 mm shaft size
HEDL-6443-IT01 · Three channel encoder with 512 cpr and 2 mm shaft size
HEDL-6443-IT02 · Three channel encoder with 512 cpr and 3 mm shaft size
HEDL-6403-AT01 · Two channel encoder with 500 cpr and 2 mm shaft size
HEDL-6403-AT02 · Two channel encoder with 500 cpr and 3 mm shaft size
HEDL-6403-AT11 · Two channel encoder with 500 cpr and 4 mm shaft size
HEDL-6443-AT01 · Three channel encoder with 500 cpr and 2 mm shaft size
HEDL-6443-AT02 · Three channel encoder with 500 cpr and 3 mm shaft size
HEDL-6402-IP01 · Two channel encoder with 512 cpr and 2 mm shaft size
HEDL-6402-IP02 · Two channel encoder with 512 cpr and 3 mm shaft size
HEDL-6403-IP01 · Two channel encoder with 512 cpr and 2 mm shaft size
HEDL-6403-IP02 · Two channel encoder with 512 cpr and 3 mm shaft size
HEDL-6443-IP01 · Three channel encoder with 512 cpr and 2 mm shaft size
HEDL-6443-IP02 · Three channel encoder with 512 cpr and 3 mm shaft size
HEDL-6442-AT01 · Three channel encoder with 500 cpr and 2 mm shaft size
HEDL-6442-AT02 · Three channel encoder with 500 cpr and 3 mm shaft size
HEDL-6403-IT11 · Two channel encoder with 512 cpr and 4mm shaft size
HEDL-6402-IT11 · Two channel encoder with 512 cpr and 4mm shaft size
HEDL-6402-AP01 · Two channel encoder with 500 cpr and 2 mm shaft size
HEDL-6402-AP02 · Two channel encoder with 500 cpr and 3 mm shaft size
HEDL-6402-AP11 · Two channel encoder with 500 cpr and 4 mm shaft size
HEDL-6403-AP01 · Two channel encoder with 500 cpr and 2 mm shaft size
HEDL-6403-AP02 · Two channel encoder with 500 cpr and 3 mm shaft size
HEDL-6403-AP11 · Two channel encoder with 500 cpr and 4 mm shaft size
HEDL-6403-IP11 · Two channel encoder with 512 cpr and 4 mm shaft size
HEDL-6402-IP11 · Two channel encoder with 512 cpr and 4 mm shaft size
HEDL-6442-AP01 · Three channel encoder with 500 cpr and 2 mm shaft size
HEDL-6442-AP02 · Three channel encoder with 500 cpr and 3 mm shaft size
HEDL-6443-AP01 · Three channel encoder with 500 cpr and 2 mm shaft size
HEDL-6443-AP02 · Three channel encoder with 500 cpr and 3 mm shaft size
|
Avago Technologies, Ltd.
HP[Agilent(Hewlett-Packard)]
Agilent (Hewlett-Packard)
|
|
