| PART |
Description |
Maker |
| TCM811 TCM811FERC TCM811LERC TCM811MERC TCM811RERC |
The TCM811 and TCM812 are cost-effective system supervisor circuits designed to monitor VCC in digital systems and provide a reset signal to the host processor when necessary. A manual reset input is provided to override the reset monitor,
4-Pin Microcontroller Reset Monitors
|
MICROCHIP[Microchip Technology]
|
| MAX792 MAX792CPE MAX792CSE MAX792EJE MAX792EPE MAX |
Microprocessor and non-volatile metory supervisory circuit. Reset threshold 4.62V. Reset and low-line threshold accuracy -2%
Microprocessor and non-volatile metory supervisory circuit. Reset threshold 4.37V. Reset and low-line threshold accuracy -2%
Microprocessor and non-volatile metory supervisory circuit. Reset threshold 2.61V. Reset and low-line threshold accuracy -2%
Microprocessor Voltage Monitors with Programmable Voltage Detection
Dual D-type Positive-Edge-Triggered Flip-Flops With Clear And Preset 14-CFP -55 to 125 微处理器和非挥发性内存监控电
Microprocessor and Non-Volatile Memory Supervisory Circuits
From old datasheet system
Microprocessor and non-volatile metory supervisory circuit. Reset threshold 3.06V. Reset and low-line threshold accuracy -2%
|
MAXIM - Dallas Semiconductor
Maxim Integrated Products, Inc.
MAXIM[Maxim Integrated Products]
|
| MAX801 MAX801CPA MAX801CSA MAX801EPA MAX801ESA MAX |
Supervisory circuit with -1.5% reset accuracy. Reset threshold(typ) 4.425V. Watchdog.
Supervisory circuit with -1.5% reset accuracy. Reset threshold(typ) 4.675V. Watchdog.
Supervisory circuit with -1.5% reset accuracy. Reset threshold(typ) 4.575V. CMOS RAM write protection..
8-Pin µP Supervisory Circuits with ±1.5% Reset Accuracy
8-Pin µP Supervisory Circuits with ±1.5% Reset Accuracy
8-Pin μP Supervisory Circuits with ±1.5eset Accuracy
8-Pin P Supervisory Circuits with 1.5eset Accuracy
From old datasheet system
8-Pin レP Supervisory Circuits with 【1.5eset Accuracy
5015 RR 3#8 SKT RECP
8-Pin レP Supervisory Circuits with 1.5eset Accuracy 8引脚レP监控电路与精度1.5eset
8-Pin レP Supervisory Circuits with 1.5eset Accuracy 8引脚微处理器监控电路，提amp;plusmn;1.5%的复位门限精
Interface IC 1-CHANNEL POWER SUPPLY SUPPORT CKT, CDIP8
Supervisory circuit with -1.5% reset accuracy. Reset threshold(typ) 4.575V. Watchdog.
Supervisory circuit with -1.5% reset accuracy. Reset threshold(typ) 4.675V. CMOS RAM write protection..
|
MAXIM - Dallas Semiconductor
MAXIM[Maxim Integrated Products]
Maxim Integrated Products, Inc.
|
| S24023SB |
Precision RESET Controller and 4K I2C Memory With Both RESET and RESET Outputs 精密复位控制器和4K的I2C既复位和复位输出记忆
|
Summit Microelectronics, Inc.
|
| TC1278 TC1279 TC1278-10ENBTR TC1278-15ENBTR TC1278 |
The TC1278 and TC1279 are cost-effective system supervisor circuits designed to monitor VCC in digital systems and provide a reset signal to the host processor when necessary. No external components are required. The reset output is driven
The TC1278 and TC1279 are cost-effective system supervisor circuits designed to monitor VCC in digital systems and provide a reset ...
|
Microchip
|
| S24022 |
Precision RESET Controller and 2K I2C Memory With Both RESET and RESET Outputs
|
Summit Microelectronics, In...
|
| S24022SBT S24023SBT S24023P2.7T |
Precision RESET controller and 2K I2C memory with both RESET and non-RESET outputs
|
SUMMIT Microelectronics
|
| MAX6713Z MAX6713T MAX6713S MAX6713R MAX6713M MAX67 |
Microprocessor reset circuit with manual reset input. Reset threshold 2.63V. Output type active-low push-pull reset.
Microprocessor reset circuit with manual reset input. Reset threshold 4.38V. Output type active-low push-pull reset.
Microprocessor reset circuit with manual reset input. Reset threshold 4.63V. Output type active-low push-pull reset.
Microprocessor reset circuit with manual reset input. Reset threshold 2.93V. Output type active-low open-drain reset.
Microprocessor reset circuit with manual reset input. Reset threshold 2.93V. Output type active-high push-pull reset.
Microprocessor reset circuit with manual reset input. Reset threshold 2.93V. Output type active-low push-pull reset.
4-Pin SC70 Microprocessor Reset Circuits with Manual Reset Input 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO4
8-Bit Shift Register 16-SOIC -40 to 125 4引脚、SC70微处理器复位电路，带有手动复位输
8-Bit Shift Register 16-PDIP -40 to 125 4引脚、SC70微处理器复位电路，带有手动复位输
|
Maxim Integrated Produc...
MAXIM - Dallas Semiconductor
MAXIM[Maxim Integrated Products]
Maixm
Maxim Integrated Products, Inc.
|
| MM1136 |
System Reset (with built-in watchdog timer)
From old datasheet system
|
Mitsumi
|
| M62023P M62023L M62023FP M62023E M62023 |
From old datasheet system
SYSTEM RESET IC WITH SWITCH FOR MEMORY BACK-UP
|
Mitsubishi Electric Sem...
MITSUBISHI[Mitsubishi Electric Semiconductor]
Mitsubishi Electric Corporation
|
| MC74HC175A MC74HC175AD MC74HC175ADR2 MC74HC175ADT |
Quad D-type Flip-Flop with Common Clock and Reset
Quad D Flip-Flop with Common Clock and Reset High-Performance Silicon-Gate CMOS
QUAD D FLLP-FLOP WLTH COMMON CLOCK AND RESET
From old datasheet system
|
ONSEMI[ON Semiconductor]
|
| MCP809 MCP809T-270I_TT MCP809T-300I_TT MCP809T-315 |
1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO3
The MCP809 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper ...
The MCP810 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper ...
The MCP810 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage d
The MCP809 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage d
MICROCONTROLLER SUPERVISORY CIRCUIT WITH PUSH-PULL OUTPUT
|
Microchip Technology Inc.
|
