| PART |
Description |
Maker |
| DLW31S DLW21SXXXX |
On-Board Type (DC) EMI Suppression Filters
|
Murata Manufacturing
|
| NFM41CC223R2A3 NFM18C NFM21C NFM41CC471R2A3 NFM18C |
On-Board Type (DC) EMI Suppression Filters (EMIFIL)
|
MURATA[Murata Manufacturing Co., Ltd.]
|
| BL01RNXXX BL01RN1A1D2B BL02RN2R1N1A BL02RN2R1P1A B |
On-Board Type (DC) EMI Suppression Filters
From old datasheet system
|
ETC[ETC]
|
| NFL18ST |
(NFL18 / NFL21) On-Board Type (DC) EMI Suppression Filters
|
MURATA
|
| 70246-4021 |
Header; No. of Contacts:40; Pitch Spacing:2.54mm; No. of Rows:2; Series:C-Grid; Connector Body Material:Polyester; Mounting Type:PC Board; Terminal Type:Straight Pin 40 CONTACT(S), MALE, STRAIGHT TWO PART BOARD CONNECTOR, SOLDER
|
Molex, Inc.
|
| 53254-0710 |
Header; No. of Contacts:7; Pitch Spacing:2mm; No. of Rows:1; Series:Micro-Latch; Connector Body Material:Nylon; Mounting Type:PC Board; Terminal Type:Right Angle Pin 7 CONTACT(S), MALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, SOLDER
|
Molex, Inc.
|
| 1-316739-4 |
ON TAPING EMBOSS CAP ASSEMBLY H-TYPE 0.8MM PITCH BOARD TO BOARD CONNECTOR
|
Tyco Electronics
|
| ELKEA100FA ELKEA101FA ELKEA102FA ELKEA103FA ELKEA2 |
Coil type EMI Filters
|
http://
Panasonic Semiconductor
|
| 1553160000 |
Terminal Block; Number of Positions:6; Pitch Spacing:0.2"; Wire Size (AWG):26-12; Mounting Type:PC Board; Leaded Process Compatible:Yes; Terminal Block Clamp Type:Screw Clamp 6 CONTACT(S), FEMALE, TWO PART BOARD CONNECTOR, SCREW, SOCKET
|
Weidmuller, Corp.
|
| 87130-1000 87130-1200 |
Header; No. of Contacts:80; Pitch Spacing:0.5mm; No. of Rows:2; Series:SlimStack; Connector Body Material:Polymer; Mounting Type:PC Board; Terminal Type:Surface Mount 10 CONTACT(S), FEMALE, STRAIGHT TWO PART BOARD CONNECTOR, WIRE TRAP
2.5mm Cbl Hld Hsg PBT Wht 12Ckt 12 CONTACT(S), FEMALE, STRAIGHT TWO PART BOARD CONNECTOR, WIRE TRAP
|
Molex, Inc.
|
| QPI-8EVAL1 |
CAP 47UF 16V ELECT KMG RAD 评估板有源EMI滤波器与热插
Evaluation Board for Active EMI Filters with Hot-Swap
|
Vicor, Corp.
VICOR[Vicor Corporation]
|
