| PART |
Description |
Maker |
| BGA318 Q62702-G0043 |
From old datasheet system
Silicon Bipolar MMIC-Amplifier (Cascadable 50 W-gain block 16 dB typical gain at 1.0 GHz 12 dBm typical P-1dB at 1.0 GHz) 硅双极单片放大器（级0瓦，增益模块十六分贝典型增益.0 GHz2 dBm典型的P - 1dB的在1.0千兆赫）
Silicon Bipolar MMIC-Amplifier (Cascadable 50 W-gain block 16 dB typical gain at 1.0 GHz 12 dBm typical P-1dB at 1.0 GHz) 0 MHz - 1200 MHz RF/MICROWAVE WIDE BAND LOW POWER AMPLIFIER
|
SIEMENS[Siemens Semiconductor Group]
SIEMENS AG
|
| SFF25P20S2ITXV SFF25P20S2IS FT0009B FT0009B-15 |
typical P-Channel MOSFET
|
Solid States Devices, Inc
Solid States Devices, I...
|
| 310-025103-012 |
Filtered Low Noise Ampli er
|
Spectrum Microwave, Inc.
|
| 310-025109-022 |
Filtered Low Noise Ampli er
|
Spectrum Microwave, Inc.
|
| MCP6041 MCP6043 MCP6044 MCP6042 MCP6044T MCP6041T |
The MCP6041 operational amplifier (op amp) has a gain bandwidth product of 14 kHz with a low typical operating current of 600 nA ...
The MCP6044 quad operational amplifier (op amp) has a gain bandwidth product of 14 kHz with a low typical operating current of 600 ...
The MCP6043 operational amplifier (op amp) has a gain bandwidth product of 14 kHz with a low typical operating current of 600 nA ...
The MCP6042 dual operational amplifier (op amp) has a gain bandwidth product of 14 kHz with a low typical operating current of 600 ...
600 nA, Rail-to-Rail Input/Output Op Amps
|
MICROCHIP[Microchip Technology]
|
| 5-211111-4 |
Subminiature D Pin/Socket Connectors for MIL-C-24308 and MIL-C-39029; AMPLI,SHELL,PLUG 11C1 ( AMP )
|
Tyco Electronics
|
| 1-1218445-0 |
Subminiature D Pin/Socket Connectors for MIL-C-24308 and MIL-C-39029; AMPLI,ASSY,PLUG,RTANG,109,5 ( AMP )
|
Tyco Electronics
|
| 1-1218291-0 |
Subminiature D Pin/Socket Connectors for MIL-C-24308 and MIL-C-39029; AMPLI,ASSY,RCPT,POSTED,109,5 ( AMP )
|
Tyco Electronics
|
| MCP6542 MCP6542-I/MS MCP6542-I/P MCP6542-I/SN MCP6 |
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current ...
Push-Pull Output Sub-Microamp Comparators
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the 16 lead PDIP, SOIC and 14 lead TSSOP pack
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package,
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package.
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC, MSOP and five le
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current ...
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
From old datasheet system
IC,VOLT COMPARATOR,DUAL,CMOS,TSSOP,8PIN,PLASTIC
|
Microchip Technology Inc.
|
|
