PART |
Description |
Maker |
125-0304-0 125-0311-5 125-0309-3 125-0302-4 125-03 |
KUPPLUNG PUSH PULL UEBERWURFKAPPE 16POL EINBAUBUCHSE PUSH PULL 16POL KUPPLUNG PUSH PULL UEBERWURFKAPPE 12POL EINBAUBUCHSE PUSH PULL 12POL EINBAUSTECKER PUSH PULL 20POL EINBAUSTECKER PUSH PULL 12POL STECKER PUSH PULL UEBERWURFKAPPE 12POL STECKER PUSH PULL UEBERWURFKAPPE 20POL KUPPLUNG PUSH PULL UEBERWURFKAPPE 20POL STECKER PUSH PULL UEBERWURFKAPPE 16POL EINBAUSTECKER PUSH PULL 16POL STECKER AUSSENGEWINDE 16POL EINBAUSTECKER PUSH PULL 8POL KUPPLUNG AUSSENGEWINDE 16POL STECKER AUSSENGEWINDE 20POL EINBAUBUCHSE PUSH PULL 20POL EINBAUBUCHSE推拉20POL STECKER AUSSENGEWINDE 6POL STECKER AUSSENGEWINDE 6POL EINBAUSTECKER PUSH PULL 6POL EINBAUSTECKER推拉6POL EINBAUSTECKER AUSSENGEWINDE 4POL
|
Molex, Inc.
|
NTE1749 |
Integrated Circuit Push-Pull Four Channel Driver
|
NTE[NTE Electronics]
|
L293E L293B L239B 1328 |
PUSH-PULL FOUR CHANNEL DRIVERS From old datasheet system
|
意法半导 STMicroelectronics
|
HV5770807 HV57708PG-G HV57708-07 |
32MHz, 64-Channel Serial to Parallel Converter with Push-Pull Outputs
|
Supertex, Inc
|
RFPP3870 |
GaAs/GaN Push Pull Hybrid GaAs/GaN Push Pull Hybridz
|
RF Micro Devices
|
DS1810-15/TAMPR |
5V EconoReset with Push-Pull Output 1-CHANNEL POWER SUPPLY SUPPORT CKT, PBCY3
|
Maxim Integrated Products, Inc.
|
DS1815R-20-U |
3.3V EconoReset with Push-Pull Output 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO3
|
Maxim Integrated Products, Inc.
|
MCP6542 MCP6542-I/MS MCP6542-I/P MCP6542-I/SN MCP6 |
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ... The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current ... Push-Pull Output Sub-Microamp Comparators The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the 16 lead PDIP, SOIC and 14 lead TSSOP pack The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package, The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package. The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC, MSOP and five le The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current ... The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ... From old datasheet system IC,VOLT COMPARATOR,DUAL,CMOS,TSSOP,8PIN,PLASTIC
|
Microchip Technology Inc.
|
HV509K6-G |
16-Channel Serial to Parallel Converter with High Voltage Backplane Driver and Push-Pull Outputs
|
Supertex, Inc
|
HV513WG-G HV513K7-G |
8-Channel Serial to Parallel Converter with High Voltage Push-Pull Outputs, POL, Hi-Z, and Short Circuit Detect
|
http:// Supertex, Inc
|
|