PART |
Description |
Maker |
LTC3723EGN-1 LTC3723EGN-2 |
Synchronous Push-Pull PWM Controllers
|
Linear Technology
|
TDA4718 TDA4700 Q67000-Y639 TDA4718A Q67000-Y594 |
From old datasheet system Control IC for Single-Ended and Push-Pull Switched-Mode Power Supplies SMPS Control IC for Single-Ended and Push-Pull Switched-Mode Power Supplies (SMPS)
|
SIEMENS[Siemens Semiconductor Group] Infineon
|
L293C 1329 |
PUSH-PULL FOUR CHANNEL/DUAL H-BRIDGE DRIVER PUSH-BRIDGE DRIVER PUSH-PULL FOUR CHANNEL/DUAL From old datasheet system
|
ST Microelectronics STMICROELECTRONICS[STMicroelectronics]
|
RFPP3870 |
GaAs/GaN Push Pull Hybrid GaAs/GaN Push Pull Hybridz
|
RF Micro Devices
|
MCP6542 MCP6542-I/MS MCP6542-I/P MCP6542-I/SN MCP6 |
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ... The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current ... Push-Pull Output Sub-Microamp Comparators The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the 16 lead PDIP, SOIC and 14 lead TSSOP pack The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package, The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package. The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC, MSOP and five le The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current ... The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ... From old datasheet system IC,VOLT COMPARATOR,DUAL,CMOS,TSSOP,8PIN,PLASTIC
|
Microchip Technology Inc.
|
PTJ90 |
PTJ90 Series Dual Concentric Shaft Panel Control w/Push-Push Switch
|
Bourns Electronic Solutions
|
006200167032800 00110930040 |
pUSH-pULL CONNECTORS
|
AVX Corporation Amphenol Corporation
|
DS1810 DS1810-10 DS1810-15 DS1810-5 DS1810R-10TR D |
5V EconoReset with Push-Pull Output
|
MAXIM - Dallas Semiconductor Dallas Semiconducotr DALLAS[Dallas Semiconductor]
|
MC-7856 MC-7856G |
CATV 22 dB PUSH-PULL AMPLIFIER
|
NEC Corp. NEC[NEC] CEL[California Eastern Labs]
|
MAAM-011177-TR1000 MAAM-011177-TR2500 MAAM-011177- |
Push-Pull CATV Amplifier
|
M/A-COM Technology Solu...
|