| PART |
Description |
Maker |
| HL6365DG HL6364DG |
Low Operating Current Visible Laser Diode
|
OPNEXT[Opnext. Inc.]
|
| HL6357MG HL6356MG |
Low Operating Current Visible Laser Diode
|
OPNEXT[Opnext. Inc.]
|
| HL6359MG HL6358MG |
Low Operating Current Visible Laser Diode
|
OPNEXT[Opnext. Inc.]
|
| HL6367DG HL6366DG |
Low Operating Current Visible High Power Laser Diode
|
OPNEXT[Opnext. Inc.]
|
| MCP619-I/P MCP619-I/SL MCP619-I/ST MCP617-I/MS MCP |
The MCP619 quad operational amplifier (op amp) has a gain bandwidth product of 190 kHz with a low typical operating current of 19 ...
The MCP617 dual operational amplifier (op amp) has a gain bandwidth product of 190 kHz with a low typical operating current of 19 ...
The MCP618 operational amplifier (op amp) has a gain bandwidth product of 190 kHz with a low typical operating current of 19 µA ...
The MCP616 operational amplifier (op amp) has a gain bandwidth product of 190 kHz with a low typical operating current of 19 µA ...
|
Microchip
|
| LP62S16256FU-55LLT |
55ns; operating current:40mA; standby current:10uA; 256K x 16bit low voltage CMOS SRAM
|
AMIC Technology
|
| LP62S1024BX-55LLI LP62S1024BX-55LLIF |
55ns; operating current:30mA; standby current:5uA; 128K x 8bit low voltage CMOS SRAM
|
AMIC Technology
|
| KK-0332-30 |
Operating Voltage= 250/440 Vac Operating Current Max= 30 amp/Ph
|
JMK Inc.
|
| MM-0637A-100 |
Operating Voltage = 48 Vdc Operating Current (Max) = 100 Amp
|
JMK Inc.
|
| ZG-1435-1B |
Operating Voltage = 125/250 Vac Operating Current = 1.0 Ampere
|
JMK Inc.
|
| FF-1069A-3B |
Operating voltage = 125 / 250 Vac Operating current = 3 Amps
|
JMK Inc.
|
| FF-1199-6B |
Operating Voltage: 125 / 250 v~ Operating Current (Max): 6.0 AMP
|
JMK Inc.
|
