| PART |
Description |
Maker |
| MCP6142 MCP6144 MCP6143 MCP6141 MCP6142-I/MS MCP61 |
600 nA, Non-Unity Gain Rail-to-Rail Input/Output Op Amps
The MCP6142 is a dual 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier ...
The MCP6143 is a single with chip select 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. ...
The MCP6141 is a single 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6142 is a dual 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6143 is a single with chip select 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6144 is a quad 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6144 is a quad 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier ...
The MCP6141 is a single 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier ...
|
Microchip Technology Inc.
MICROCHIP[Microchip Technology]
|
| CBT3306D-T CBT3306GM |
Dual bus switch - # of Bits per Enable: 1 ; Description: Bus Switch ; Number of bits: 2 ; Operating temperature: -40~85 Cel; Operating voltage: 4.5~5.5 VDC CBT/FST/QS/5C/B SERIES, DUAL 1-BIT DRIVER, TRUE OUTPUT, PDSO8
|
NXP Semiconductors N.V.
|
| MCP6002 MCP6002EP MCP6002ESN MCP6004 MCP6004E MCP6 |
The MCP6002 is a dual general purpose op amp offering rail to rail input & output over the 1.8 to 5.5V operating range. This amplifier has a typical GBWP of 1 MHz with typical quiescent current of 100 microamperes. The MCP6002 is avail
Operational Amplifier - Datasheet Reference
1 MHz Bandwidth Low Power Op Amp
The MCP6001 is a single general purpose op amp offering rail to rail input & output over the 1.8 to 5.5V operating range. This amplifier has a typical GBWP of 1 MHz with typical quiescent current of 100 microamperes. The MCP6001 is ava
|
Microchip Technology Inc
MICROCHIP[Microchip Technology]
|
| STK3152III |
Aluminum Electrolytic Capacitor; Capacitor Type:High Temperature; Voltage Rating:6.3VDC; Capacitor Dielectric Material:Aluminum Electrolytic; Operating Temperature Range:-55 C to 105 C; Capacitance:220uF RoHS Compliant: No 2通道电压放大器为800瓦功率放大器（双电源
2-Channel Voltage Amplifier for 80 to 90W power Amplifier (Dual Supplies)
|
ETC
Sanyo Semicon Device
List of Unclassifed Manufacturers
|
| Q68000-A8882 CGY180 |
Power Amplifier (DECT, PCS)
From old datasheet system
GaAs MMIC (Power amplifier for DECT and PCS application Fully integrated 3 stage amplifier Operating voltage range: 2.7 to 6 V)
|
Infineon
SIEMENS[Siemens Semiconductor Group]
SIEMENS AG
|
| AA-0221-20 |
Operating voltage = 115/250 Vac Operating current = 20 Amp
|
JMK Inc.
|
| ZG-1435-1B |
Operating Voltage = 125/250 Vac Operating Current = 1.0 Ampere
|
JMK Inc.
|
| ZF-1543-3.5B |
Operating Voltage = 115 / 250 VAC Operating Current = 3.5 Ampere
|
JMK Inc.
|
| DN6847TE |
Hall IC(Operating Temperature Range Topr = - 40 to -100C, Operating in Alternative Magnetic Field)
|
Panasonic
|
| 1041 |
Operating Voltage = 250/480 Vac Operating Current Max= 80 & 100 amps
|
JMK Inc.
|
| DN6844S |
Hall IC (Operating Supply Voltage Range Vcc=3.6 to 16V, Operating in Alternative Magnetic Field)
|
Panasonic
|
