| PART |
Description |
Maker |
| CPHS-FRM9D-6S-8P |
Liquid crystal polymer (LCP), glass reinforced, flame retardant in accordance with 隆掳UL 94V-0隆卤; UL file number E54705(M)
Liquid crystal polymer (LCP), glass reinforced, flame retardant in accordance with “UL 94V-0? UL file number E54705(M)
|
Ferroxcube International Holding B.V.
|
| PEH532 |
IEC 60384-4 Long Life Grade 40/105/56, in accordance with CECC 30 301-809
|
Kemet Corporation
|
| 0536260000 |
The universal foot of the Weidmüller relay modules allow them to be assembled on TS 32, TS 35 x 7.5 and TS 35 x 15 mounting rails in accordance with European standards EN 50 035 and EN 50 022.
|
Weidmuller
|
| IR1150 IR1150PBF IR1150ISTRPBF |
One Cycle Control PFC IC designed to operate in continuous conduction mode (CCM), designed and qualified for the Consumer market
One Cycle Control PFC IC designed to operate in continuous conduction mode (CCM), designed and qualified for the Industrial market.
|
International Rectifier
|
| CRIMPFOX-UD-6-6 |
Crimping pliers, hexagonal compression, for ferrules 0.25 - 6 mm2 in accordance with DIN 46228-1: 1992-08 and DIN 46228-4: 1990-09
|
PHOENIX CONTACT
|
| CRIMPFOX-ZA-3 |
Crimping pliers, for ferrules in accordance with DIN 46228-1: 1992-08 and DIN 46228-4: 1990-09
|
PHOENIX CONTACT
|
| MAS1215-33 MAS1220-33 |
Equipment Designed to Conform EMI Regulations Such As VCCICISPRFCCVDEetc
Equipment Designed to Conform EMI Regulations Such As VCCI,CISPR,FCC,VDE,etc
|
LAMBDA[DENSEI-LAMBDA]
|
| MCP809 MCP809T-270I_TT MCP809T-300I_TT MCP809T-315 |
1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO3
The MCP809 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper ...
The MCP810 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper ...
The MCP810 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage d
The MCP809 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage d
MICROCONTROLLER SUPERVISORY CIRCUIT WITH PUSH-PULL OUTPUT
|
Microchip Technology Inc.
|
| MBS1230-22 MBS1205 MBS1205-22 MBS1210-22 MBS1215-2 |
Equipment Designed to Meet EMI Regulations Such As VCCI /CISPR /FCC /VDE /etc
Equipment Designed to Meet EMI Regulations Such As VCCICISPRFCCVDEetc
Equipment Designed to Meet EMI Regulations Such As VCCI,CISPR,FCC,VDE,etc
|
LAMBDA[DENSEI-LAMBDA]
|
| NE56610 NE56610-42GW NE56610-45GW NE56612-45GW NE5 |
Family of devices designed to generate a reset signal for a variety of microprocessor and logic systems 家庭旨在生成一个微处理器和逻辑的各种复位信号系统设
Family of devices designed to generate a reset signal for a variety of microprocessor and logic systems 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO5
|
NXP Semiconductors N.V.
PHILIPS[Philips Semiconductors]
|
| CY38030V208-125NC CY38030V208-125NI CY38030V256-12 |
Programmable Logic : Programmable Logic Devices
CPLD designed for migration. Speed 83 MHz.
CPLD designed for migration. Speed 125 MHz.
|
Cypress
|
| AT75C140 |
AT75C140 Advance Information [Updated . 18 Pages] This Smart Internet Appliance Processor is a high-performance processor specially designed
Smart Internet Appliance Processor (SIAP-TM)
This Smart Internet Appliance Processor is a high-performance processor specially designed for network-enabling consumer and industrial applications. The specific architecture of this device delivers unmatched performance for low power con
|
ATMEL[ATMEL Corporation]
|
