| PART |
Description |
Maker |
| FAN6753 FAN6755 AN-6755 |
Design Guideline to Replace FAN6753 with FAN6755
Design Guideline to Replace FAN6753 with FAN6755
|
Fairchild Semiconductor
|
| AN3326 |
SPC56EL60x hardware design guideline
|
STMicroelectronics
|
| EDS11-139A |
REPLACE CASE
|
Fuji Electric
|
| TFSE75K0JE TFSD4K70JE TFSA4K99FE TFSA1K00JE TFSA1K |
Ideal to replace standard carbon com-position resistors
Ideal to replace standard carbon com-position resistors
|
Ohmite Mfg. Co.
|
| ACA2407E ACA2407ES7P0 ACA2407ES7P2 |
750/870 MHz CATV Power Doubler Line Amplifier
The ACA2407E is a highly linear, monolithic GaAs RF amplifier that has been developed to replace, in new desgins, standard CATV hybrid ...
|
ANADIGICS, Inc
Anadigics Inc
|
| CM100TJ-24F |
128 x 64 pixel format, LED or EL Backlight available
Trench Gate Design Six IGBTMOD 100 Amperes/1200 Volts
Trench Gate Design Six IGBTMOD⑩ 100 Amperes/1200 Volts
Trench Gate Design Six IGBTMOD?/a> 100 Amperes/1200 Volts
|
POWEREX[Powerex Power Semiconductors]
|
| HI-8105 HI-8105PST HI-8105PSI HI-8105PDT HI-8105PD |
PROGRAMMABLE DIVIDER WITH OSC OR CLK SPECIALTY LOGIC CIRCUIT, CDIP8
128 MACROCELL 3.3 VOLT ZERO POWER ISP CP - NOT RECOMMENDED for NEW DESIGN SPECIALTY LOGIC CIRCUIT, CDIP8
128 MACROCELL 3.3 VOLT ISP CPLD - NOT RECOMMENDED for NEW DESIGN
256 MACROCELL 3.3 VOLT ISP CPLD - NOT RECOMMENDED for NEW DESIGN
|
HOLT INTEGRATED CIRCUITS INC
Holt Integrated Circuits, Inc.
HOLTIC[Holt Integrated Circuits]
|
| GRM2.1180.013 |
Power Entry Module; IEC; Voltage Rating: 250V; Current Rating: 10A; Terminal Type: Quick Connect Solder Tabs; Ultra-compact design; "lock and in-in design; IEC/EN 60950 10A, 125/250VAC, MALE, MAINS POWER CONNECTOR, SOLDER, SOCKET
|
SCHURTER AG
|
| CM150TU-12F |
Trench Gate Design Six IGBTMOD?/a> 150 Amperes/600 Volts
Trench Gate Design Six IGBTMOD⑩ 150 Amperes/600 Volts
240 x 128 pixel format, CFL Backlight with power harness
|
POWEREX[Powerex Power Semiconductors]
|
| CM100DU-24F CM100DU-24H |
Trench Gate Design Dual IGBTMOD?/a> 100 Amperes/1200 Volts
HIGH POWER SWITCHING USE INSULATED TYPE
Trench Gate Design Dual IGBTMOD⑩ 100 Amperes/1200 Volts
Trench Gate Design Dual IGBTMOD 100 Amperes/1200 Volts
|
Mitsubishi Electric Semiconductor
Powerex Power Semiconductors
|
