| PART |
Description |
Maker |
| AN667 |
DESIGNING A HIGH POWER FACTOR SWITCHING PREREGULATOR WITH THE L6560/A TRANSITION MODE I.C.
|
ST Microelectronics
|
| AN3978 |
Designing a digital output module
|
STMicroelectronics
|
| AN939 |
Designing Energy Meters with the PIC16F873A
|
Microchip Technology Inc.
|
| AN703 |
Designing DC/DC Converters with the Si9110 Switchmode Controller
|
Vishay
|
| AN4217 |
Designing the SPV1020 with serial and parallel output configurations
|
STMicroelectronics
|
| AN716 |
Designing with Siliconix PC Card (PCMCIA) Power Interface Switches
|
Vishay
|
| CMX589AMX909AMX029 |
Using Two-Point Modulation to Reduce Synthesizer Problems When Designing DC-Coupled GMSK Modulators
|
CONSUMER MICROCIRCUITS LIMITED
|
| AN709 |
Designing with the Si9976DY N-Channel Half-Bridge Driver and LITTLE FOOT Dual MOSFETs
|
VISAY[Vishay Siliconix]
|
| AN1498 |
ST9 - DESIGNING A THREE PHASE AC INVERTER CONTROL & INTERFACE BOARD WITH THE ST92141 MCU
|
SGS Thomson Microelectronics
|
| AN1536 |
DESIGNING APPLICATIONS THAT WORK WITH ANY M25PXX DEVICE TAKING ADVANTAGE OF THEIR HARDWARE AND SOFTWARE COMPATIBILITY
|
SGS Thomson Microelectronics
|
