| PART |
Description |
Maker |
| AN261 |
DESIGNING WITH THERMAL IMPEDANCE
|
SGS Thomson Microelectronics
|
| AN939 |
Designing Energy Meters with the PIC16F873A
|
Microchip Technology Inc.
|
| E909.01 |
DESIGNING SYSTEMS WITH HALIOS? SWITCH
|
ELMOS Semiconductor AG
|
| AN2544 |
Designing a low cost power supply using
|
STMicroelectronics
|
| AN435 |
ST6 - DESIGNING WITH MICROCONTROLLERS IN NOISY ENVIRONMENTS
|
SGS Thomson Microelectronics
|
| AN1185 |
DESIGNING FOR COMPATIBILITY BETWEEN ST AND AMD FLASH MEMORIES
|
SGS Thomson Microelectronics
|
| AND8053_D AND8053.REV0 |
Designing CrystalOscillators with ModernCMOS Gates
From old datasheet system
|
ON Semiconductor
|
| AN-4153 |
Designing Asymmetric PWM Half-Bridge Converters
|
http://
|
| CMX589AMX909AMX029 |
Using Two-Point Modulation to Reduce Synthesizer Problems When Designing DC-Coupled GMSK Modulators
|
CONSUMER MICROCIRCUITS LIMITED
|
| AN1498 |
ST9 - DESIGNING A THREE PHASE AC INVERTER CONTROL & INTERFACE BOARD WITH THE ST92141 MCU
|
SGS Thomson Microelectronics
|
| AN707 |
Designing Low-Power Off-Line Flyback Converters, using the Si9120 switchmode controller IC
|
Vishay
|
| D1B121000 |
Dip type construction with the same terminal pitch as ICs or TTLs simplifies PC board designing.
|
COSMO[COSMO Electronics Corporation]
|
