| PART |
Description |
Maker |
| AN-9738 |
Design Guideline on 150W Power Supply for LED Street Lighting Design Using FL7930B and FAN7621S
|
Fairchild Semiconductor
|
| CM200TU-12F |
240 x 128 pixel format, CFL Backlight with power harness
Trench Gate Design Six IGBTMOD⑩ 200 Amperes/600 Volts
Trench Gate Design Six IGBTMOD 200 Amperes/600 Volts
Trench Gate Design Six IGBTMOD?/a> 200 Amperes/600 Volts
|
POWEREX[Powerex Power Semiconductors]
|
| IDT77950 77950_DS_39296 IDT77955 |
SwitchStar ATM 1.24Gbps Switch Reference Design **NOT RECOMMENDED FOR NEW DESIGNS**
155Mbps Optical Line Card for IDT77950 Switch **NOT RECOMMENDED FOR NEW DESIGNS**
SwitchStarTM Reference Design Using the IDT77V400 Switching Memory and IDT77V500 Switch Controller
From old datasheet system
|
Integrated Device Technology
IDT
ETC[ETC]
List of Unclassifed Manufacturers
|
| HI-8105 HI-8105PST HI-8105PSI HI-8105PDT HI-8105PD |
PROGRAMMABLE DIVIDER WITH OSC OR CLK SPECIALTY LOGIC CIRCUIT, CDIP8
128 MACROCELL 3.3 VOLT ZERO POWER ISP CP - NOT RECOMMENDED for NEW DESIGN SPECIALTY LOGIC CIRCUIT, CDIP8
128 MACROCELL 3.3 VOLT ISP CPLD - NOT RECOMMENDED for NEW DESIGN
256 MACROCELL 3.3 VOLT ISP CPLD - NOT RECOMMENDED for NEW DESIGN
|
HOLT INTEGRATED CIRCUITS INC
Holt Integrated Circuits, Inc.
HOLTIC[Holt Integrated Circuits]
|
| GRM2.1180.013 |
Power Entry Module; IEC; Voltage Rating: 250V; Current Rating: 10A; Terminal Type: Quick Connect Solder Tabs; Ultra-compact design; "lock and in-in design; IEC/EN 60950 10A, 125/250VAC, MALE, MAINS POWER CONNECTOR, SOLDER, SOCKET
|
SCHURTER AG
|
| BCM94704 BCM94712 |
802.11a/54g™ Dual-Band AP/Router Reference Design
802.11b/54g™ Integrated Wireless AP/Router Reference Design
|
Broadcom
|
| CM350DU-5F |
Trench Gate Design Dual IGBTMOD 350 Amperes/250 Volts
Trench Gate Design Dual IGBTMOD⑩ 350 Amperes/250 Volts
Trench Gate Design Dual IGBTMOD350 Amperes/250 Volts
|
POWEREX[Powerex Power Semiconductors]
|
| HPC-1420-ISSE |
Robust 1U Quad-Core Intel庐 Xeon庐 Processor with Innovative Cable-less Design
Robust 1U Quad-Core Intel? Xeon? Processor with Innovative Cable-less Design
|
Advantech Co., Ltd.
|
| GRM4 GRM4.5302.013 GRM4.5302.123 GRM4.5402.013 GRM |
mounting, line switch, fuseh. 5x20 mm with/without voltage sel
Power Entry Module; IEC; Voltage Rating: 250V; Current Rating: 10A; Terminal Type: Quick Connect Solder Tabs; Ultra-compact design; "lock and in-in design; with shield 10A, 250VAC/125VAC, MALE, MAINS POWER CONNECTOR, SOLDER, SOCKET
Power Entry Module; IEC; Voltage Rating: 250V; Current Rating: 0A; Terminal Type: Quick Connect Solder Tabs; Ultra-compact design; "lock and in-in design; with shield 0.5A, 250VAC/125VAC, MALE, MAINS POWER CONNECTOR, SOLDER, SOCKET
Power Entry Module; IEC; Voltage Rating: 250V; Current Rating: 3A; Terminal Type: Quick Connect Solder Tabs; Ultra-compact design; "lock and in-in design; with shield 3A, 250VAC/125VAC, MALE, MAINS POWER CONNECTOR, SOLDER, SOCKET
Power Entry Module; IEC; Voltage Rating: 250V; Current Rating: 1A; Terminal Type: Quick Connect Solder Tabs; Ultra-compact design; "lock and in-in design; with shield 1A, 250VAC/125VAC, MALE, MAINS POWER CONNECTOR, SOLDER, SOCKET
Power Entry Module; IEC; Voltage Rating: 250V; Current Rating: 6A; Terminal Type: Quick Connect Solder Tabs; Ultra-compact design; "lock and in-in design; with shield 6A, 250VAC/125VAC, MALE, MAINS POWER CONNECTOR, SOLDER, SOCKET
|
Schurter Inc.
SCHURTER AG
|
| XCV812E-6FGG900C XCV812E-7FGG900C XCV812E-6FGG900I |
XCV812E-6FGG900C - NOT RECOMMENDED for NEW DESIGN FPGA, 4704 CLBS, 254016 GATES, 357 MHz, PBGA900
XCV812E-7FGG900C - NOT RECOMMENDED for NEW DESIGN FPGA, 4704 CLBS, 254016 GATES, 400 MHz, PBGA900
XCV812E-6FGG900I - NOT RECOMMENDED for NEW DESIGN FPGA, 4704 CLBS, 254016 GATES, 357 MHz, PBGA900
|
Xilinx, Inc.
|
| CM50DU-24F |
Trench Gate Design Dual IGBTMOD?/a> 50 Amperes/1200 Volts
Trench Gate Design Dual IGBTMOD⑩ 50 Amperes/1200 Volts
Trench Gate Design Dual IGBTMOD 50 Amperes/1200 Volts
|
Powerex Power Semiconductors
|
| B32921A2473M189 B32923B2474K289 B32923B2474K000 B3 |
EMI Suppression Capacitors (MKP) Not for new design
Film Capacitors EMI Suppression Capacitors (MKP) Not for new design
EMI Suppression Capacitors (MKP) Not for new design
|
EPCOS
|
