| PART |
Description |
Maker |
| ATS645LSH-I2 ATS645LSH-I1 |
True Zero Speed Miniature Gear-Tooth Sensor
|
Allegro MicroSystems
|
| ATS645LSHTN-I2-T ATS645LSH ATS645LSHTN-I1-T |
True Zero Speed Miniature Gear Tooth Sensor
|
ALLEGRO[Allegro MicroSystems]
|
| ATS665LSGTN-T ATS665LSG05 ATS665LSG |
True Zero Speed, High Accuracy, Gear Tooth Sensor
|
ALLEGRO[Allegro MicroSystems]
|
| A3056EU A3058LU A3058EU A3056LU A3046LU A3046EU A3 |
HALL EFFECT GEAR-TOOTH SENSORS ZERO SPEED 霍尔效应齿轮齿传感器零
KPT 2C 2#20 PIN PLUG
Low-Power, Single-/Dual-Level Battery Monitors with Hysteresis and Integrated µP Reset
HALL EFFECT GEAR-TOOTH SENSORS ZERO SPEED
|
Allegro MicroSystems, Inc.
ALLEGRO[Allegro MicroSystems]
|
| A1642LK A1642LK-I1-T A1642LK-I2-T A1642LKTN-I1-T A |
Two-Wire True Zero-Speed Miniature Differential Peak-Detecting Sensor with Continuous Calibration
|
Allegro MicroSystems
|
| A1642LK-I2-T A1642LK-I1-T A1642LKTN-I2-T A1642LKTN |
Two-Wire True Zero-Speed Miniature Differential Peak-Detecting Sensor with Continuous Calibration 双线真零高速微型差分峰值检测与连续校准传感
|
Allegro MicroSystems, Inc.
|
| ATS616LSGTN-T ATS616LSG10 |
The ATS616 gear-tooth sensor IC is a peak-detecting device that uses automatic gain control and an integrated capacitor to provide extremely accurate gear edge detection down to..
|
Allegro MicroSystems
|
| ATS643LSH-I2 ATS643LSH ATS643LSH-I1 |
Self-Calibrating, Zero-Speed Differential Gear Tooth Sensor with Continuous Update
|
ALLEGRO[Allegro MicroSystems]
|
| A1698LUBTN-FWPG-T |
Two-Wire, True Zero-Speed, High Accuracy
|
Allegro MicroSystems
|
| NS-3913-G1 |
Gear and Coupling Grease
|
Syn-Tech
|
| TX48720256S128FI |
Computer On Module
Two High-Speed USB 2.0 ports, True colour LCD controller
|
List of Unclassifed Manufacturers
List of Unclassifed Man...
|
| ATS612JSB 0612JB |
DYNAMIC SELF-CALIBRATING PEAK-DETECTING DIFFERENTIAL HALL-EFFECT GEAR-TOOTH SENSOR
DYNAMIC, SELF-CALIBRATING, PEAK-DETECTING, DIFFERENTIAL HALL-EFFECT GEAR-TOOTH SENSOR
From old datasheet system
|
ALLEGRO[Allegro MicroSystems]
|
