| PART |
Description |
Maker |
| ACSM-2033NM5112 ACSM-2155NM5175X ACSM-2155NZM5175X |
RF/MICROWAVE THRESHOLD DETECTOR
|
|
| ACSP-2501NZC15R-RC ACSP-2501PC8-RC ACSP-2501PC15-R |
500 MHz - 2000 MHz RF/MICROWAVE THRESHOLD DETECTOR, 20 dBm INPUT POWER-MAX ROHS COMPLIANT, CASE C15
500 MHz - 2000 MHz RF/MICROWAVE THRESHOLD DETECTOR, 20 dBm INPUT POWER-MAX ROHS COMPLIANT, CASE C8
|
Radicom Research, Inc.
|
| ACSM-2006NZM12-RC |
2000 MHz - 18000 MHz RF/MICROWAVE THRESHOLD DETECTOR, 20 dBm INPUT POWER-MAX
|
|
| ACSP-2518PZC15R-RC |
7900 MHz - 8400 MHz RF/MICROWAVE THRESHOLD DETECTOR, 23 dBm INPUT POWER-MAX ROHS COMPLIANT, CASE C15
|
Amphenol, Corp.
|
| TC53 TC53N3002ETR TC53C1802CTTR TC53C1802ETR TC53C |
The TC53 is a low power voltage detector. Typical supply current consumption is only 1A at an input voltage of 2V. The voltage detection threshold setting is factory-programmed and guaranteed to ±2% accuracy. Threshold settings are a
|
MICROCHIP[Microchip Technology]
|
| TD62601 TD62601F TD62601P TD62602F TD62602P TD6260 |
4CH THRESHOLD FREE DRIVER
6CH THRESHOLD FREE DRIVER
|
http://
TOSHIBA[Toshiba Semiconductor]
|
| MAX801 MAX801CPA MAX801CSA MAX801EPA MAX801ESA MAX |
Supervisory circuit with -1.5% reset accuracy. Reset threshold(typ) 4.425V. Watchdog.
Supervisory circuit with -1.5% reset accuracy. Reset threshold(typ) 4.675V. Watchdog.
Supervisory circuit with -1.5% reset accuracy. Reset threshold(typ) 4.575V. CMOS RAM write protection..
8-Pin µP Supervisory Circuits with ±1.5% Reset Accuracy
8-Pin µP Supervisory Circuits with ±1.5% Reset Accuracy
8-Pin μP Supervisory Circuits with ±1.5eset Accuracy
8-Pin P Supervisory Circuits with 1.5eset Accuracy
From old datasheet system
8-Pin レP Supervisory Circuits with 【1.5eset Accuracy
5015 RR 3#8 SKT RECP
8-Pin レP Supervisory Circuits with 1.5eset Accuracy 8引脚レP监控电路与精度1.5eset
8-Pin レP Supervisory Circuits with 1.5eset Accuracy 8引脚微处理器监控电路，提amp;plusmn;1.5%的复位门限精
Interface IC 1-CHANNEL POWER SUPPLY SUPPORT CKT, CDIP8
Supervisory circuit with -1.5% reset accuracy. Reset threshold(typ) 4.575V. Watchdog.
Supervisory circuit with -1.5% reset accuracy. Reset threshold(typ) 4.675V. CMOS RAM write protection..
|
MAXIM - Dallas Semiconductor
MAXIM[Maxim Integrated Products]
Maxim Integrated Products, Inc.
|
| MPAT-02000220-3706 MPAT-10701250-6020 MPAT-0750085 |
2000 MHz - 2200 MHz RF/MICROWAVE VARIABLE ATTENUATOR, 1.7 dB INSERTION LOSS-MAX
10700 MHz - 12500 MHz RF/MICROWAVE VARIABLE ATTENUATOR, 2.2 dB INSERTION LOSS-MAX
7500 MHz - 8500 MHz RF/MICROWAVE VARIABLE ATTENUATOR, 1.8 dB INSERTION LOSS-MAX
7900 MHz - 8400 MHz RF/MICROWAVE VARIABLE ATTENUATOR, 2.2 dB INSERTION LOSS-MAX
7250 MHz - 7750 MHz RF/MICROWAVE VARIABLE ATTENUATOR, 2.2 dB INSERTION LOSS-MAX
2100 MHz - 2700 MHz RF/MICROWAVE VARIABLE ATTENUATOR, 1.5 dB INSERTION LOSS-MAX
17700 MHz - 20200 MHz RF/MICROWAVE VARIABLE ATTENUATOR, 3 dB INSERTION LOSS-MAX
17300 MHz - 18100 MHz RF/MICROWAVE VARIABLE ATTENUATOR, 3 dB INSERTION LOSS-MAX
12750 MHz - 13250 MHz RF/MICROWAVE VARIABLE ATTENUATOR, 2.5 dB INSERTION LOSS-MAX
5845 MHz - 6430 MHz RF/MICROWAVE VARIABLE ATTENUATOR, 2.2 dB INSERTION LOSS-MAX
|
MITEQ, Inc.
|
| R3111Q091A R3111Q091A-T1 R3111Q091A-TR R3111Q091A- |
Low voltage detector. Detector threshold (-Vdet) 5.5V. Output type: CMOS. Standard taping specification TR
Low voltage detector. Detector threshold (-Vdet) 4.4V. Output type: Nch open drain. Standard taping specification TR
Low voltage detector. Detector threshold (-Vdet) 3.8V. Output type: Nch open drain. Standard taping specification TR
LOW VOLTAGE DETECTOR R3111XXX1A/C SERIES
Low voltage detector. Detector threshold (-Vdet) 3.8V. Output type: CMOS. Standard taping specification TR
Low voltage detector. Detector threshold (-Vdet) 4.4V. Output type: CMOS. Standard taping specification TR
Low voltage detector. Detector threshold (-Vdet) 5.6V. Output type: CMOS. Standard taping specification TR
|
RICOH[RICOH electronics devices division]
|
| DTD05080 |
Threshold Detector
|
DAICO[DAICO Industries, Inc.]
|
