PART |
Description |
Maker |
ZSM561C ZSM561N8 ZSM561 ZSM561G |
Reset Low Monitor SUPPLY VOLTAGE MONITOR
|
ZETEX[Zetex Semiconductors]
|
ZM33164 |
Reset Low Monitor
|
Zetex Semiconductors
|
P4C188-35LC P4C188-17PC P4C188L-17PC P4C188-20CM |
2-Wire Serial Temp Sensor/Thermal Monitor, -55C to 125C, 8-SOIC 150mil, T/R x4的SRAM Microprocessor 3.08V Reset Monitor, -40C to 85C, 3-SOT-23, T/R x4的SRAM x4 SRAM x4的SRAM Microprocessor 3.08V Reset Monitor, -40C to 125C, 3-SOT-23, T/R x4的SRAM
|
Pyramid Semiconductor, Corp. KEMET Corporation
|
ZSH560_03 ZSH560 ZSH560C ZSH560G |
Reset High Monitor-Not recommended for new designs SUPPLY VOLTAGE MONITOR
|
ZETEX[Zetex Semiconductors]
|
LTC17261 LTC1726EMS8-2.5 LTC1726IS8-2.5 LTC1726ES8 |
Triple Supply Monitor and 庐 Supervisor with Adjustable Reset and Watchdog Timer Triple Supply Monitor and ? Supervisor with Adjustable Reset and Watchdog Timer Triple Supply Monitor and µP Supervisor with Adjustable Reset and Watchdog Timer; Package: SO; No of Pins: 8; Temperature Range: -40°C to 125°C 3-CHANNEL POWER SUPPLY MANAGEMENT CKT, PDSO8
|
Linear Technology, Corp.
|
TCM810 TCM809 |
3-Pin Microcontroller Reset Monitors(3寮??寰???跺?澶??????? IC,VOLT DETECTOR,FIXED, 4.63V,CMOS,TSSOP,6PIN,PLASTIC The TCM809 and TCM810 are cost-effective system supervisor circuits designed to monitor VCC in digital systems and provide a reset signal to the host processor when necessary. No external components are required. The reset output is driven
|
Microchip Technology Inc.
|
NCP803SN160T1G NCP803SN263T1 NCP803SN263T1G NCP803 |
Very Low Supply Current 3-Pin Microprocessor Reset Monitor
|
http:// ON Semiconductor
|
MAX792 MAX792CPE MAX792CSE MAX792EJE MAX792EPE MAX |
Microprocessor and non-volatile metory supervisory circuit. Reset threshold 4.62V. Reset and low-line threshold accuracy -2% Microprocessor and non-volatile metory supervisory circuit. Reset threshold 4.37V. Reset and low-line threshold accuracy -2% Microprocessor and non-volatile metory supervisory circuit. Reset threshold 2.61V. Reset and low-line threshold accuracy -2% Microprocessor Voltage Monitors with Programmable Voltage Detection Dual D-type Positive-Edge-Triggered Flip-Flops With Clear And Preset 14-CFP -55 to 125 微处理器和非挥发性内存监控电 Microprocessor and Non-Volatile Memory Supervisory Circuits From old datasheet system Microprocessor and non-volatile metory supervisory circuit. Reset threshold 3.06V. Reset and low-line threshold accuracy -2%
|
MAXIM - Dallas Semiconductor Maxim Integrated Products, Inc. MAXIM[Maxim Integrated Products]
|
SE809 |
3-Pin Microprocessor Reset Monitor
|
Seaward Electronics Inc.
|