PART |
Description |
Maker |
LD6206 |
Maximum Output Current: 250mA
|
TY Semiconductor Co., Ltd
|
STK392-020 |
Convergence Correction Circuit Three Channel in a Single Package(Maximum Output Current:6A) 收敛校正电路的三通道(最大输出电流:6A在单一封装
|
Sanyo Electric Co., Ltd. Sanyo Semicon Device
|
2N6230 |
N FEMALE POWER DIVIDER; NUMBER OF OUTPUT PORTS: 2; FREQUENCY RANGE: 2 - 500 MHz; MINIMUM ISOLATION: 25 dB; VSWR: 1.35 MAXIMUM; MAXIMUM INSERTION LOSS
|
TT electronics Semelab Limited
|
MCP1700 |
The MCP1700 is a CMOS low dropout positive voltage regulator which can source up to 250mA of current with an extremely low input-output ...
|
Microchip
|
CS8371 CS8371ET7 CS8371ETVA7 |
TRANS NPN 50V 30MA VMT3 8V/1A/ 5V/250mA Dual Regulator with Independent Output Enables and NoCap 8V/1A, 5V/250mA Dual Regulator with Independent Output Enables and NoCap
|
ZF Electronics Corporation CHERRY[Cherry Semiconductor Corporation]
|
FS100UM-03 |
100 A, 30 V, 0.0054 ohm, N-CHANNEL, Si, POWER, MOSFET, TO-220 Bench Power Supply; Output Voltage:30V; Output Current:3A; Number of Outputs:3; Calibrated:Yes; Certificate of Calibration:Yes; Output Current 2:.5A; Output Current 3:.5A; Output Voltage 2:12V; Output Voltage 3:5V HIGH-SPEED SWITCHING USE
|
Mitsubishi Electric Corporation MITSUBISHI[Mitsubishi Electric Semiconductor]
|
QD5C090-50 CJ5C090-50 CJ5C090-60 LD5C090-60 MD5C09 |
Rotary Switch; No. of Switch Positions:5; Circuitry:DPST; Contact Current Max:250mA; Contact Rating:250mA at 125VAC; Leaded Process Compatible:Yes; Mounting Type:PCB; Switch Features:Flatted Actuator; Switch Function:DPST UV-Erasable/OTP PLD UV-Erasable/OTP可编程逻辑器件
|
TE Connectivity, Ltd.
|
SN-A24B SN-A200BF SN-A100BF SN-A12B SN-D100BF SN-D |
SOLID STATE RELAY (I/O Module) MAXIMUM LOAD CURRENT 1 A TRANSISTOR OUTPUT SOLID STATE RELAY, 2500 V ISOLATION-MAX 20 X 5 MM, 17 MM HEIGHT, ROHS COMPLIANT, ULTRA SLIM PACKAGE-4
|
Fujitsu Component Limited. http:// FUJITSU Component., Ltd.
|
MAX508608 MAX5086AATE MAX5086BATE |
45V, 250mA, Low-Quiescent-Current Linear Regulator with Adjustable Reset Delay
|
Maxim Integrated Products
|