| PART |
Description |
Maker |
| TC1029EUA TC1029 TC1029EOA TC1029EPA |
The TC1029 is a dual, CMOS operational amplifier designed for low-power applications. It is designed specifically for operation from ...
The TC1029 is a dual, CMOS operational amplifier designed for low-power applications. It is designed specifically for operation from a single supply, however, operation from dual supplies is also possible, and the power supply current drai
Linear Building Block - Dual Low Power Op Amp
|
MICROCHIP[Microchip Technology]
|
| MCF51MM128CLK MCF51MM128CMB MCF51MM128VLK MCF51MM1 |
low-cost, low-power, high-performance ColdFire庐 V1 family of 32-bit microcontrollers (MCUs) designed for handheld metering devices.
low-cost, low-power, high-performance ColdFire? V1 family of 32-bit microcontrollers (MCUs) designed for handheld metering devices.
|
Freescale Semiconductor, Inc
Freescale Semiconductor...
|
| MX10F201FC |
High-Performance and Low Power Microcontroller designed
|
Macronix International
|
| REC-10LA |
Precision Linear Transducers, Designed for Mount in Hydraulic or Pneumatic Cylinder, Conductive Plastic Element, Designed for High Pressure Chamber of Small Cylinders, Equipped with Glass-Sealed Electrical Outputs
|
Vishay
|
| ET-LM386 |
The MIK386 is a power amplifier designed for use in low voltage consumer applications
|
Estek Electronics Co. L...
|
| IRS21867SPBF |
HIGH AND LOW SIDE DRIVER
Floating channel designed for bootstrap operation
|
International Rectifier
|
| GD420SD |
The GD420SD is designed for low power rectification.
The GD420SD is designed for low power rectification.
|
E-Tech Electronics LTD
|
| P0502NL P0527NL P0429NL P0422NL P0420NL P0421NL P0 |
Designed for DC/DC converters, Wide variety of inductor sizes and current ratings available
Solutions based on impedance, size and current, Designed for DC/DC converters, Dielectric strength: 1000VRMS
|
Pulse A Technitrol Company
|
| MPU200-4530 MDU200 MDU200-1012G MDU200-1024G MDU20 |
Power Factor Correction (PFC) with a low-profile package designed to meet 1U height constraints
|
POWER-ONE[Power-One]
|
| ATA01501 |
The ANADIGICS ATA01501 is a 5V low noise transimpedance amplifier with AGC designed to be used in OC-3/STM-1 fiber optic links.
|
Anadigics Inc
|
| 0618001.XP 0618.125XP 0618.315XP 0618.160XP 0618.2 |
0618XP - Series 5x20mm Time-Lag Fuse Designed to IEC Standard (Low Breaking Capacity)
|
Littelfuse
|
