| PART |
Description |
Maker |
| HCPL-3120 |
2.0 Amp Output Current IGBT Gate Drive Optocoupler
|
Agilent (Hewlett-Packard)
Agilent(Hewlett-Packard)
|
| HCPLT250 |
1.5 Amp Output Current IGBT Gate Drive Optocoupler
|
Agilent Technologies
|
| HCPL-0302 |
0.4 Amp Output Current IGBT Gate Drive Optocoupler
|
AVAGO TECHNOLOGIES LIMITED
|
| HCNW3120 HCPL3120 |
2.0 Amp Output Current IGBT Gate Drive Optocoupler
|
Agilent(Hewlett-Packard)
|
| HCPL-T251 |
HCPL-T251 · 0.4 Amp Output Current IGBT Gate Drive Optocoupler
|
Agilent (Hewlett-Packard)
|
| ACPL-W341 ACPL-P341-560E ACPL-W341-560E |
3.0 Amp Output Current IGBT Gate Drive Optocoupler with Rail-to-Rail
|
AVAGO TECHNOLOGIES LIMITED
|
| FGB30N6S2D FGH30N6S2D FGP30N6S2D FGB30N6S2DT |
Switch Mode Power Supply; Output Power:198W; No. of Outputs:1; Output 1 VDC :3VDC; Output Current 1:60A; Power Supply Mounting:Chassis; Output Current:60A; Output Power Max:198W; Output Voltage:3VDC; Series:JWS RoHS Compliant: Yes
600V, SMPS II Series N-Channel IGBT with Anti-Parallel StealthTM Diode
600V/ SMPS II Series N-Channel IGBT with Anti-Parallel StealthTM Diode
600V, SMPS II Series N-Channel IGBT with Anti-Parallel Stealth TM Diode
600V, SMPS II Series N-Channel IGBT with Anti-Parallel Stealth Diode
|
Fairchild Semiconductor Corporation
FAIRCHILD[Fairchild Semiconductor]
|
| MCP6142 MCP6144 MCP6143 MCP6141 MCP6142-I/MS MCP61 |
600 nA, Non-Unity Gain Rail-to-Rail Input/Output Op Amps
The MCP6142 is a dual 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier ...
The MCP6143 is a single with chip select 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. ...
The MCP6141 is a single 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6142 is a dual 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6143 is a single with chip select 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6144 is a quad 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6144 is a quad 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier ...
The MCP6141 is a single 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier ...
|
Microchip Technology Inc.
MICROCHIP[Microchip Technology]
|
| FS100UM-03 |
100 A, 30 V, 0.0054 ohm, N-CHANNEL, Si, POWER, MOSFET, TO-220
Bench Power Supply; Output Voltage:30V; Output Current:3A; Number of Outputs:3; Calibrated:Yes; Certificate of Calibration:Yes; Output Current 2:.5A; Output Current 3:.5A; Output Voltage 2:12V; Output Voltage 3:5V
HIGH-SPEED SWITCHING USE
|
Mitsubishi Electric Corporation
MITSUBISHI[Mitsubishi Electric Semiconductor]
|
| VO3150A-X007T |
0.5 A Output Current IGBT and MOSFET Driver
|
Vishay Siliconix
|
