| PART |
Description |
Maker |
| HCPL-0314 HCPL-3140 |
HCPL-0314 · 0.4 Amp Output Current IGBT Gate Drive Optocoupler
HCPL-3140 · 0.4 Amp Output Current IGBT Gate Drive Optocoupler
|
Agilent (Hewlett-Packard)
|
| ACPL-P343-000E ACPL-P343-060E |
4.0 Amp Output Current IGBT Gate Drive Optocoupler
|
AVAGO TECHNOLOGIES LIMI...
|
| HCPL-0302 |
0.4 Amp Output Current IGBT Gate Drive Optocoupler
|
AVAGO TECHNOLOGIES LIMITED
|
| ACPL-333J-000E |
2.5 Amp Output Current IGBT Gate Driver Optocoupler with Integrated
|
AVAGO TECHNOLOGIES LIMITED
|
| HCPL-T250 HCPL-T250300 HCPL-T250360 HCPL-T250500 H |
1 CHANNEL LOGIC OUTPUT OPTOCOUPLER
1.5 Amp Output Current IGBT Gate Drive Optocoupler
|
AVAGO TECHNOLOGIES LIMITED
|
| ACPL-K342-060E ACPL-K342-000E ACPL-K342-560E ACPL- |
2.5 Amp Output Current IGBT Gate Drive Optocoupler with Active Miller Clamp, Rail-to-Rail Output Voltage and UVLO in Stretched SO8
|
AVAGO TECHNOLOGIES LIMI...
AVAGO TECHNOLOGIES LIMITED
|
| HCPL-J314 |
0.4 Amp Output Current IGBT Gate Drive Optocoupler(0.4 放大输出电流 IGBT门驱动光耦合 0.4安培输出电流IGBT栅极驱动光电耦合器（0.4放大输出电流IGBT的门驱动光耦合器）
|
Avago Technologies, Ltd.
|
| ACPL-331J-500E |
1.5 Amp Output Current IGBT Gate Driver Optocoupler with Integrated (VCE) Desaturation Detection, UVLO, Fault Status Feedback and Active Miller Clamping
|
AVAGO TECHNOLOGIES LIMITED
|
| PM30RHC060 |
TRANSISTOR | IGBT POWER MODULE | 3-PH BRIDGE | 600V V(BR)CES | 30A I(C)
Intellimod-3 Modules: Three Phase Brake, IGBT Inverter Output 30 Amp, 110-230 Volt Line
|
Powerex Power Semiconductors
|
| MCP6142 MCP6144 MCP6143 MCP6141 MCP6142-I/MS MCP61 |
600 nA, Non-Unity Gain Rail-to-Rail Input/Output Op Amps
The MCP6142 is a dual 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier ...
The MCP6143 is a single with chip select 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. ...
The MCP6141 is a single 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6142 is a dual 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6143 is a single with chip select 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6144 is a quad 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6144 is a quad 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier ...
The MCP6141 is a single 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier ...
|
Microchip Technology Inc.
MICROCHIP[Microchip Technology]
|
| TS612_02 TS612 TS612ID TS612IDT |
DUAL WIDEBAND OP-AMP WITH HIGH OUTPUT CURRENT
DUAL WIDE BAND OPERATIONAL AMPLIFIER WITH HIGH OUTPUT CURRENT
|
ST Microelectronics
STMICROELECTRONICS[STMicroelectronics]
|
| VO3150A-X007T |
0.5 A Output Current IGBT and MOSFET Driver
|
Vishay Siliconix
|
