| PART |
Description |
Maker |
| R1510S009C-T1-FE |
Input Voltage Range (Maximum Rating) Max. 36.0V (50V)
|
RICOH electronics devic...
|
| TSC3824 TSC3827 TSC3828 TSC3829 TSC1220 TSC1222 TS |
Input voltage range:80-160V output voltage 220V (0.8A) DC/DC converter
Input voltage range:93-138V/185-264V, 50/60Hz, output voltage 48V (15A) DC/DC converter
Input voltage range:160-320V output voltage 220V (10A) DC/DC converter
Input voltage range:160-320V output voltage 110V (4A) DC/DC converter
Input voltage range:80-160V output voltage 220V (1A) DC/DC converter
Input voltage range:36-75V output voltage 5V (30A) DC/DC converter
Input voltage range:36-75V output voltage 12V (15A) DC/DC converter
Input voltage range:36-75V output voltage 220V (0.8A) DC/DC converter
Input voltage range:36-75V output voltage 110V (1.5A) DC/DC converter
Input voltage range:36-75V output voltage 24V (7.5A) DC/DC converter
Input voltage range:36-75V output voltage 48V (3.6A) DC/DC converter
Input voltage range:160-320V output voltage 24V (100A) DC/DC converter
Input voltage range:160-320V output voltage 48V (45A) DC/DC converter
Input voltage range:93-138V/185-264V, 50/60Hz, output voltage 220V (10A) DC/DC converter
|
TRACOPOWER[TRACO Electronic AG]
TRACO[Traco Electronic AG]
|
| MCP6142 MCP6144 MCP6143 MCP6141 MCP6142-I/MS MCP61 |
600 nA, Non-Unity Gain Rail-to-Rail Input/Output Op Amps
The MCP6142 is a dual 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier ...
The MCP6143 is a single with chip select 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. ...
The MCP6141 is a single 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6142 is a dual 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6143 is a single with chip select 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6144 is a quad 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6144 is a quad 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier ...
The MCP6141 is a single 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier ...
|
Microchip Technology Inc.
MICROCHIP[Microchip Technology]
|
| TXS100ZA TXS100ZB TXS100ZY TXS75ZA TXS75ZB TXS75ZY |
Input voltage range 36ˇ75V DC Single 80ˇ100A output 1500V DC I/O electrical strength test voltage 输入电压范围3675V直流1500V的单80100A直流输出的I / O电气强度试验电压
Input voltage range 365V DC Single 8000A output 1500V DC I/O electrical strength test voltage
Input voltage range 36?5V DC Single 80?00A output 1500V DC I/O electrical strength test voltage
|
Power-One
|
| LM319 LM119 |
Guaranteed Maximum 0.5mV Input Offset Voltage
|
Linear Technology
|
| 2N5952 2N5952D74Z |
N-Channel RF Amplifier
N-Channel RF Ampifier
BNC FEMALE POWER DIVIDER; NUMBER OF OUTPUT PORTS: 8; FREQUENCY RANGE: 2 - 500 MHz; MINIMUM ISOLATION: 20 dB; VSWR: 1.50 MAXIMUM; MAXIMUM INSERTION
|
FAIRCHILD[Fairchild Semiconductor]
Fairchild Semiconductor Corporation
|
| BSR57 BSR56 BSR58 |
N-CHANNEL FETS
RP10 (E) Series - Powerline Regulated DC-DC Converters; Input Voltage (Vdc): 24V; Output Voltage (Vdc): 12V; 2:1 Wide Input Voltage Range; 10 Watts
|
NXP Semiconductors
Philips Semiconductors
|
| BT148-600R BT148 BT148-400R BT148-500R |
RP10 (E) Series - Powerline Regulated DC-DC Converters; Input Voltage (Vdc): 48V; Output Voltage (Vdc): 12V; 2:1 Wide Input Voltage Range; 10 Watts
Thyristors logic level
|
PHILIPS[Philips Semiconductors]
NXP Semiconductors
|
| FLTR100V10 FLTR100V10-62 FLTR100V10-62Z FLTR100V10 |
75 Vdc Input Maximum, 10 A Maximum
|
Lineage Power Corporation
|
| MCP1701T-3 MCP1701 MCP1701T-33021_CB MCP1701T-3302 |
2uA Low Dropoout Positive Voltage Refulator
The MCP1701 is a CMOS low dropout positive voltage regulator with a maximum input voltage of 10V that can source up to 250mA with ...
|
MICROCHIP[Microchip Technology]
|
| SR1045C |
Schottky barrier rectifier. Positive CT. Maximum recurrent peak reverse voltage 45 V. Maximum average forward rectified current 10 A.
|
Bytes
|
