| PART |
Description |
Maker |
| MCP6542 MCP6542-I/MS MCP6542-I/P MCP6542-I/SN MCP6 |
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current ...
Push-Pull Output Sub-Microamp Comparators
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the 16 lead PDIP, SOIC and 14 lead TSSOP pack
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package,
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package.
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC, MSOP and five le
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current ...
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
From old datasheet system
IC,VOLT COMPARATOR,DUAL,CMOS,TSSOP,8PIN,PLASTIC
|
Microchip Technology Inc.
|
| L293DD013TR L293D L293DD L293D03 L293B-03 L293D-03 |
PUSH-PULL FOUR CHANNEL DRIVER WITH DIODES
PUSH-PULL FOUR CHANNEL DRIVERS
|
STMICROELECTRONICS[STMicroelectronics]
ST Microelectronics
|
| DS3687H DS3687J-8/A DS3687N-8/B DS3687H/A DS3687N- |
Dual Peripheral Driver
µP Supervisory, Push/Pull Active-Low, TH: 1.8V, Timeout: 100ms, SOT23 3-pin
µP Supervisory, Push/Pull Active-Low, TH: 1.6V, Timeout: 100ms, SOT23 3-pin
µP Supervisory, Push/Pull Active-Low, TH: 2.3V, Timeout: 20ms, SOT23 3-pin
µP Supervisory, Push/Pull Active-Low, TH: 2.0V, Timeout: 100ms, SOT23 3-pin
µP Supervisory, Push/Pull Active-Low, TH: 1.8V, Timeout: 100ms, SOT23 3-pin 双外围驱动器
|
KEMET Corporation
|
| S8740200P |
GaAs Push Pull Hybrid
|
PDI
|
| MC-7852 |
CATV 18 dB PUSH-PULL AMPLIFIER
|
CEL[California Eastern Labs]
|
| DRF1301 |
MOSFET Push-Pull Hybrid
|
Microsemi Corporation
|
| MC-7852G MC-7852 |
CATV 18 dB PUSH-PULL AMPLIFIER
|
NEC Corp.
NEC[NEC]
CEL[California Eastern Labs]
|
| DS1815 DS1815-5 DS1815-10 DS1815-15 DS1815R-5TR DS |
3.3V EconoReset with Push-Pull Output
|
DALLAS[Dallas Semiconductor]
MAXIM - Dallas Semiconductor
|
| MCH6536 MCH653608 |
Push-Pull Circuit Applications
|
Sanyo Semicon Device
|
| S8740340PT |
GaAs Push Pull Hybrid
|
PDI
|
| DS1810R-15-U DS1810R-5-U |
5V EconoReset with Push-Pull Output
|
MAXIM - Dallas Semiconductor
|
|
