 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| SURFACE MOUNT LED LAMP FULL COLOR 1210 QTLP650D-RGB Red/Green/Blue PACKAGE DIMENSIONS 2 G B R 1 Top View 0.060 (1.5) 0.107 (2.7) 4 3 0.127 (3.2) RESIN 0.0198 (0.5) COMMON ANODE Side View 0.043 (1.1) PCB ANODE SIDE Bottom View 0.0473 (1.2) 0.0276 (0.7) Die 1 Pin 1 (Red) Pin 4 Die 2 Pin 2 (Green) Die 3 Pin 3 (Blue) POLARITY APPLICATIONS * Keypad backlighting * Push-button backlighting * LCD backlighting NOTE: Dimensions for all drawings are in inches (mm). DESCRIPTION This full-color surface mount chip LED is designed to fit industry standard footprint. Small size, low profile and wide viewing angle make this LED ideal for backlighting applications and panel illumination. FEATURES * Miniature footprint - 3.2(L) X 2.7(W) X 1.1(H) mm * AllnGaP and InGaN technology * Wide viewing angle of 140 * Diffused optics * Moisture-proof packaging * Available in 0.315" (8mm) width tape on 7" (178mm) diameter reel; 2,000 units per reel (c) 2003 Fairchild Semiconductor Corporation Page 1 of 7 9/26/03 SURFACE MOUNT LED LAMP FULL COLOR 1210 QTLP650D-RGB Red/Green/Blue ABSOLUTE MAXIMUM RATINGS (TA =25C Unless otherwise specified) Parameter Continuous Forward Current Peak Forward Current (f = 1.0 KHz, Duty Factor = 1/10) Reverse Voltage (IR = 100 A) Power Dissipation Operating Temperature Storage Temperature Lead Soldering Time Symbol IF IFM VR PD TOPR TSTG TSOL 72 R 30 100 G 20 80 5 78 -30 to +80 -40 to +85 260 for 5 sec 78 B 20 80 Units mA mA V mW C C C ELECTRICAL / OPTICAL CHARACTERISTICS (TA =25C) QTLP650D Parameter Luminous Intensity (mcd) Forward Voltage (V) Wavelength (nm) Typical Viewing Angle () min: typ: typ: max: Peak: Dominance: Symbol R IV VF IP ID 2U1/2 25 60 1.9 2.4 630 624 G 63 130 3.3 3.9 520 525 140 B 25 40 3.3 3.9 468 470 IF = 20mA IF = 20mA IF = 20mA IF = 20mA Condition (c) 2003 Fairchild Semiconductor Corporation Page 2 of 7 9/26/03 SURFACE MOUNT LED LAMP FULL COLOR 1210 QTLP650D-RGB Red/Green/Blue TYPICAL PERFORMANCE CURVES Fig. 1A Forward Current vs. Forward Voltage Fig. 1B Forward Current vs. Forward Voltage 40 FORWARD CURRENT (mA) 100 35 30 10 25 20 15 BLUE & GREEN 1 RED 10 5 0.1 1.0 0 1.4 1.8 2.2 2.6 0 2 3 4 5 FORWARD VOLTAGE (V) FORWARD VOLTAGE (V) Fig. 2 Relative Intensity vs. Forward Current 150 Fig. 3 Forward Current vs. Ambient Temperature 30 RELATIVE INTENSITY (%) FORWARD CURRENT (mA) 125 100 75 50 25 0 0 5 10 15 20 25 30 35 40 25 20 15 10 5 3 0 -20 0 20 40 BLUE & GREEN RED 60 80 100 FORWARD VOLTAGE (mA) AMBIENT TEMPERATURE (C) Fig. 4 Relative Intensity vs. Peak Wavelength 1.0 RELATIVE INTENSITY 0.5 0 468 520 630 WAVELENGTH (nm) (c) 2003 Fairchild Semiconductor Corporation Page 3 of 7 9/26/03 SURFACE MOUNT LED LAMP FULL COLOR 1210 QTLP650D-RGB Red/Green/Blue TYPICAL PERFORMANCE CURVES Fig.5 Radiation Diagrams 0 -30 QTLP650D RGB 0 30 QTLP650D RGB -30 30 -60 R B G 60 -60 R B G 60 100% 50% 0 50% 100% 100% 50% 0 50% 100% (c) 2003 Fairchild Semiconductor Corporation Page 4 of 7 9/26/03 SURFACE MOUNT LED LAMP FULL COLOR 1210 QTLP650D-RGB Red/Green/Blue RECOMMENDED PRINTED CIRCUIT BOARD PATTERN 0.181 (4.6) 0.083 (2.1) 0.114 (2.9) 0.020 (0.5) RECOMMENDED IR REFLOW SOLDERING PROFILE 5 sec MAX soldering time 240 C MAX +5 C/s MAX -5 C/s MAX 60 - 120 sec Preheating 120 - 150 C MAX (c) 2003 Fairchild Semiconductor Corporation Page 5 of 7 9/26/03 SURFACE MOUNT LED LAMP FULL COLOR 1210 QTLP650D-RGB Red/Green/Blue TAPE AND REEL DIMENSIONS 8.4 +1.5 -0.0 11.0 5 0. 2.5 +0.5 -0.0 O12.75 +0.25 -0.0 Progressive direction 1.75 2.00.05 4.0 O1.55.05 0.23 3.50.05 2.5 0 0.5 O62.00.5 O1801 8.0 3.56 1.65 4.0 2.95 Polarity Dimensional tolerance is 0.1mm unless otherwise specified Angle: 0.5 Unit: mm (c) 2003 Fairchild Semiconductor Corporation Page 6 of 7 9/26/03 SURFACE MOUNT LED LAMP FULL COLOR 1210 QTLP650D-RGB Red/Green/Blue DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. (c) 2003 Fairchild Semiconductor Corporation Page 7 of 7 9/26/03 |
Price & Availability of QTLP650D-RGB
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |