 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 2981 THRU 2984 UDN2981A thru UDN2984A 1 2 3 4 5 6 7 8 VS 18 17 16 15 14 13 12 11 GND 8-CHANNEL SOURCE DRIVERS Recommended for high-side switching applications that benefit from separate logic and load grounds, these devices encompass load supply voltages to 80 V and output currents to -500 mA. These 8-channel source drivers are useful for interfacing between low-level logic and high-current loads. Typical loads include relays, solenoids, lamps, stepper and/or servo motors, print hammers, and LEDs. All devices may be used with 5 V logic systems -- TTL, Schottky TTL, DTL, and 5 V CMOS. The UDN2981A, UDN2982A, UDN2982LW, and A2982SLW are electrically interchangeable, will withstand a maximum output off voltage of 50 V, and operate to a minimum of 5 V; the UDN2983A, UDN2984A, UDN2984LW, and A2984SLW drivers are electrically interchangeable, will withstand an output voltage of 80 V, and operate to a minimum of 35 V. All devices in this series integrate input current limiting resistors and output transient suppression diodes, and are activated by an active high input. The suffix `A' (all devices) indicates an 18-lead plastic dual in-line package with copper lead frame for optimum power dissipation. Under normal operating conditions, these devices will sustain 120 mA continuously for each of the eight outputs at an ambient temperature of +50C and a supply of 15 V. The suffix `LW' (UDN2982LW and UDN2984LW only) indicates an 18lead surface-mountable wide-body SOIC package; the A2982SLW and A2984SLW are provided in a 20-lead wide-body SOIC package with improved thermal characteristics. The UDN2982A, UDN2982LW, A2982SLW, UDN2984A, UDN2984LW, and A2984SLW drivers are also available for operation over an extended temperature range to -40C. To order, change the prefix `UDN' to `UDQ' or the suffix `SLW' to `ELW'. Data Sheet 29310D* Dwg. No. A-10, 243 Note that the UDN2980A series (dual in-line package) and UDN2980LW series (small-outline IC package) are electrically identical and share a common terminal number assignment. ABSOLUTE MAXIMUM RATINGS at 25C Free-Air Temperature Output Voltage Range, VCE (UDN2981A, UDN2982A, UDN2982LW, and A2982SLW) . . 5 V to 50 V (UDN2983A, UDN2984A, UDN2984LW, and A2984SLW) . 35 V to 80 V Input Voltage, VIN (UDN2981A and UDN2983A) . . . . . . . . . 15 V (UDN2982A, UDN2984A, UDN2982LW, UDN2984LW, A2982SLW, and A2984SLW) . . . . . . . . . 20 V Output Current, IOUT . . . . . . . . . . . . . . -500 mA Package Power Dissipation, PD . . . . . . . . . . . . . . . . . . . . . . . See Graph Operating Temperature Range, TA . . . . . . . . . . . . . . . . . . . . -20C to +85C Storage Temperature Range, TS . . . . . . . . . . . . . . . . . . . -55C to +150C FEATURES I I I I I TTL, DTL, PMOS, or CMOS Compatible Inputs 500 mA Output Source Current Capability Transient-Protected Outputs Output Breakdown Voltage to 80 V DIP or SOIC Packaging Always order by complete part number, e.g., UDN2981A . Note that all devices are not available in all package styles. 2981 THRU 2984 8-CHANNEL SOURCE DRIVERS One of Eight Drivers V5 9 20 K 2983/84 ONLY 7.2 K INPUT 3K OUTPUT 1.5 K GROUND Dwg. No. A-10,242B 2.5 ALLOWABLE PACKAGE POWER DISSIPATION IN WATTS A2982SLW and A2984SLW 2.0 18-PIN DIP, RJA = 60C/W 20-LEAD SOIC, RJA = 70C/W 18-LEAD SOIC, RJA = 80C/W 1 2 3 4 5 6 7 8 +V S NO CONNECTION 9 10 NC 20 19 18 17 16 15 14 13 12 NC 11 GROUND NO CONNECTION 1.5 1.0 0.5 0 Dwg. PP-064-2 25 50 75 100 125 AMBIENT TEMPERATURE IN C 150 Dwg. GP-022-4 2 115 Northeast Cutoff, Box 15036 Worcester, Massachusetts 01615-0036 (508) 853-5000 W Copyright (c) 1977, 2000 Allegro MicroSystems, Inc. 2981 THRU 2984 8-CHANNEL SOURCE DRIVERS ELECTRICAL CHARACTERISTICS at TA = +25C (unless otherwise specified). Characteristic Output Leakage Current Symbol ICEX Applicable Devices 2981/82 2983/84 Output Sustaining Voltage Collector-Emitter Saturation Voltage VCE(SAT) All VCE(SUS) 2981/82 2983/84 Test Conditions VIN = 0.4 V*, VS = 50 V, TA = +70C VIN = 0.4 V*, VS = 80 V, TA = +70C IOUT = -45 mA IOUT = -70 mA VIN = 2.4 V, IOUT = -100 mA VIN = 2.4 V, IOUT = -225 mA VIN = 2.4 V, IOUT = -350 mA Input Current IIN(ON) 2982/84 2981/83A VIN = 2.4 V VIN = 3.85 V VIN = 2.4 V VIN = 12 V Output Source Current (Outputs Open) Supply Current Leakage Current Clamp Diode Forward Voltage Clamp Diode Turn-On Delay VF tON tOFF IR IS lOUT 2981/83A 2982/84 2981/82 2983/84 2981/82 2983/84 All All VIN = 2.4 V, VCE = 2.0 V VIN = 2.4 V, VCE = 2.0 V VIN = 2.4 V*, VS = 50 V VIN = 2.4 V*, VS = 80 V VR = 50 V, VIN = 0.4 V* VR = 80 V, VIN = 0.4 V* IF = 350 mA 0.5 EIN to 0.5 EOUT, RL = 100, VS = 35 V 0.5 EIN to 0.5 EOUT, RL = 100, VS = 35 V, See Note Test Fig. 1 1 -- -- 2 2 2 3 3 3 3 2 2 4 4 5 5 6 -- Min. -- -- 35 45 -- -- -- -- -- -- -- -350 -350 -- -- -- -- -- -- Limits Typ. Max. -- -- -- -- 1.6 1.7 1.8 140 310 140 1.25 -- -- -- -- -- -- 1.5 1.0 200 200 -- -- 1.8 1.9 2.0 200 450 200 1.93 -- -- 10 10 50 50 2.0 2.0 Units A A V V V V V A A A mA mA mA mA mA A A V s s Turn-Off Delay All -- -- 5.0 10 NOTES: Turn-off delay is influenced by load conditions. Systems applications well below the specified output loading may require timing considerations for some designs, i.e., multiplexed displays or when used in combination with sink drivers in a totem pole configuration. Negative current is defined as coming out of (sourcing) the specified device terminal. * All inputs simultaneously. Complete part number includes a prefix (A or UDN) and a suffix (A or SLW) as follows: UDN2981A, UDN2982A, UDN2982LW, or A2982SLW, UDN2983A, UDN2984A, UDN2984LW, or A2984SLW. www.allegromicro.com 3 2981 THRU 2984 8-CHANNEL SOURCE DRIVERS TEST FIGURES Figure 1 VS Figure 2 VS V CE mA Figure 3 V S V I IN mA OPEN I OUT V IN A I CEX Dwg. No. A-11,083 Dwg. No. A-11,084 Dwg. No. A-11,085 VIN V IN Figure 4 VS I S mA OPEN Figure 5 VS IR Figure 6 OPEN A OPEN VIN VIN VF V I F Dwg. No. A-11,086 Dwg. No. A-11,087 Dwg. No. A-11,088 4 115 Northeast Cutoff, Box 15036 Worcester, Massachusetts 01615-0036 (508) 853-5000 2981 THRU 2984 8-CHANNEL SOURCE DRIVERS Allowable peak collector current as a function of duty cycle Series UDN2980A 500 500 450 450 ALLOWABLE PEAK COLLECTOR CURRENT IN mA AT 50C ALLOWABLE PEAK COLLECTOR CURRENT IN mA AT 70C 400 RECOMMENDED MAXIMUM OUTPUT CURRENT 350 400 RECOMMENDED MAXIMUM OUTPUT CURRENT 350 3 300 300 3 4 5 6 4 250 5 6 8 NUMBER OF OUTPUTS CONDUCTING SIMULTANEOUSLY 250 7 200 200 NUMBER OF OUTPUTS CONDUCTING SIMULTANEOUSLY 150 7 8 150 100 VS = 35 V 100 VS = 35 V 50 50 0 0 10 20 30 50 60 40 PER CENT DUTY CYCLE 70 0 80 90 100 0 10 20 30 50 60 40 PER CENT DUTY CYCLE 70 80 90 100 Dwg. No. A-11,106B Dwg. No. A-11,111B UDN2981A and UDN2982A 500 500 450 450 ALLOWABLE PEAK COLLECTOR CURRENT IN mA AT 50C 400 RECOMMENDED MAXIMUM OUTPUT CURRENT 350 ALLOWABLE PEAK COLLECTOR CURRENT IN mA AT 70C 400 RECOMMENDED MAXIMUM OUTPUT CURRENT 350 300 3 4 300 3 250 250 5 7 6 8 NUMBER OF OUTPUTS CONDUCTING SIMULTANEOUSLY 4 5 200 200 6 7 8 150 150 NUMBER OF OUTPUTS CONDUCTING SIMULTANEOUSLY 100 VS = 15 V 100 VS = 15 V 50 50 0 0 10 20 30 50 60 40 PER CENT DUTY CYCLE 70 80 90 0 100 0 10 20 30 50 60 40 PER CENT DUTY CYCLE 70 80 90 100 Dwg. No. A-11,107B Dwg. No. A-11,108B www.allegromicro.com 5 2981 THRU 2984 8-CHANNEL SOURCE DRIVERS Allowable peak collector current as a function of duty cycle UDN2983A and UDN2984A 500 500 450 450 ALLOWABLE PEAK COLLECTOR CURRENT IN mA AT 50C ALLOWABLE PEAK COLLECTOR CURRENT IN mA AT 70C 400 RECOMMENDED MAXIMUM OUTPUT CURRENT 350 400 RECOMMENDED MAXIMUM OUTPUT CURRENT 350 300 3 4 300 3 250 250 5 6 200 4 5 6 8 7 8 150 NUMBER OF OUTPUTS CONDUCTING SIMULTANEOUSLY 7 200 150 NUMBER OF OUTPUTS CONDUCTING SIMULTANEOUSLY 100 100 VS = 60 V 50 50 VS = 60 V 0 0 0 10 20 30 50 60 40 PER CENT DUTY CYCLE 70 80 90 100 0 10 20 30 50 60 40 PER CENT DUTY CYCLE 70 80 90 100 Dwg. No. A-11,109B Dwg. No. A-11,110B Input current as a function of input voltage 2.5 Typical electrosensitive printer application ELECTRODES 2.0 INPUT CURRENT, I IN (mA) IN1 IN2 R 1 2 3 4 5 6 7 8 9 18 R L L L L L L L L 17 R 1.5 X MA IM UM IN3 IN4 IN 5 IN6 IN7 16 R 15 R 1.0 AL PIC TY 14 R 0.5 13 R 12 R 2 4 6 8 10 12 IN8 VS 11 10 INPUT VOLTAGE (VOLTS) Dwg. No. A-11,115B Dwg. No. A-11,113A 6 115 Northeast Cutoff, Box 15036 Worcester, Massachusetts 01615-0036 (508) 853-5000 2981 THRU 2984 8-CHANNEL SOURCE DRIVERS UDN2981A, UDN2982A, UDN2983A, and UDN2984A Dimensions in Inches (controlling dimensions) 18 10 0.014 0.008 0.430 0.280 0.240 MAX 0.300 BSC 1 0.070 0.045 0.100 0.920 0.880 BSC 9 0.005 MIN 0.210 MAX 0.015 MIN 0.150 0.115 0.022 0.014 Dwg. MA-001-18A in Dimensions in Millimeters (for reference only) 18 10 0.355 0.204 10.92 7.11 6.10 MAX 7.62 BSC 1 1.77 1.15 2.54 23.37 22.35 BSC 9 0.13 MIN 5.33 MAX 0.39 MIN 3.81 2.93 0.558 0.356 Dwg. MA-001-18A mm NOTES: 1. 2. 3. 4. Exact body and lead configuration at vendor's option within limits shown. Lead spacing tolerance is non-cumulative. Lead thickness is measured at seating plane or below. Supplied in standard sticks/tubes of 21 devices. www.allegromicro.com 7 2981 THRU 2984 8-CHANNEL SOURCE DRIVERS UDN2982LW and UDN2984LW (add "TR" to part number for tape and reel) Dimensions in Inches (for reference only) 18 10 0.0125 0.0091 0.2992 0.2914 0.419 0.394 0.050 0.016 0.020 0.013 1 2 3 0.4625 0.4469 0.050 BSC 0 TO 8 0.0926 0.1043 0.0040 MIN. Dwg. MA-008-18A in Dimensions in Millimeters (controlling dimensions) 18 10 0.32 0.23 7.60 7.40 10.65 10.00 1.27 0.40 0.51 0.33 1 2 3 11.75 11.35 1.27 BSC 0 TO 8 2.65 2.35 0.10 MIN. Dwg. MA-008-18A mm NOTES: 1. Exact body and lead configuration at vendor's option within limits shown. 2. Lead spacing tolerance is non-cumetive. 3. Supplied in standard sticks/tubes of 41 devices or add "TR" to part number for tape and reel. 8 115 Northeast Cutoff, Box 15036 Worcester, Massachusetts 01615-0036 (508) 853-5000 2981 THRU 2984 8-CHANNEL SOURCE DRIVERS A2982SLW and A2984SLW (add "TR" to part number for tape and reel) Dimensions in Inches (for reference only) 20 11 0.0125 0.0091 0.2992 0.2914 0.419 0.394 0.050 0.016 0.020 0.013 1 2 3 0.5118 0.4961 0.050 BSC 0 TO 8 0.0926 0.1043 0.0040 MIN. Dwg. MA-008-20 in Dimensions in Millimeters (controlling dimensions) 20 11 0.32 0.23 7.60 7.40 10.65 10.00 1.27 0.40 0.51 0.33 1 2 3 13.00 12.60 1.27 BSC 0 TO 8 2.65 2.35 0.10 MIN. Dwg. MA-008-20 mm NOTES: 1. Exact body and lead configuration at vendor's option within limits shown. 2. Lead spacing tolerance is non-cumulative. 3. Supplied in standard sticks/tubes of 37 devices or add "TR" to part number for tape and reel. www.allegromicro.com 9 2981 THRU 2984 8-CHANNEL SOURCE DRIVERS POWER SOURCE DRIVERS IN ORDER OF 1) OUTPUT CURRENT, 2) OUTPUT VOLTAGE, 3) NUMBER OF DRIVERS Output Ratings * mA -25 V 60 60 60 # 8 10 12 Serial Input - X X Features Latched Diode Saturated Drivers Clamp Outputs X - - X active pull-down - X active pull-down - Internal Protection - - - Part Number 5815 5810-F and 6809/10 5811 and 6811 60 20 X X active pull-down - - 5812-F and 6812 60 32 X X active pull-down - - 5818-F and 6818 85 8 - - - - - 6118 -120 -25 8 - - X X - 2585 30 8 - - X X - 2985 50 8 X X X X - 5895 -350 35 8 - - X - X 2987 50 8 - - X - - 2981 and 2982 50 8 X X X - - 5891 -50 8 - - X - - 2580 80 8 - - X - - 2983 and 2984 80 8 X X X - - 5890 -80 8 - - X - - 2588 -500 6 1 - - - MOSFET X 2525 and 2535 6 2 - - - MOSFET X 2526 and 2536 -4000 60 4 - - X - - 2944 * Current is maximum specified test condition, voltage is maximum rating. See specification for sustaining voltage limits or over-current protection voltage limits. Complete part number includes additional characters to indicate operating temperature range and package style. The products described here are manufactured under one or more U.S. patents or U.S. patents pending. Allegro MicroSystems, Inc. reserves the right to make, from time to time, such departures from the detail specifications as may be required to permit improvements in the performance, reliability, or manufacturability of its products. Before placing an order, the user is cautioned to verify that the information being relied upon is current. Allegro products are not authorized for use as critical components in life-support devices or systems without express written approval. The information included herein is believed to be accurate and reliable. However, Allegro MicroSystems, Inc. assumes no responsibility for its use; nor for any infringement of patents or other rights of third parties which may result from its use. 10 115 Northeast Cutoff, Box 15036 Worcester, Massachusetts 01615-0036 (508) 853-5000 |
Price & Availability of UDN2981
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |