View 74F08PC_18338.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

74F08 Quad 2-Input AND Gate
April 1988 Revised July 1999
74F08 Quad 2-Input AND Gate
General Description
This device contains four independent gates, each of which performs the logic AND function.
Ordering Code:
Order Number 74F08SC 74F08SJ 74F08PC Package Number M14A M14D N14A Package Description 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-120, 0.150 Narrow 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide
Devices also available in Tape and Reel. Specify by appending the suffix letter "X" to the ordering code.
Logic Symbol
IEEE/IEC
Connection Diagram
Unit Loading/Fan Out
U.L. Pin Names An, Bn On Description HIGH/LOW Inputs Outputs 1.0/1.0 50/33.3 Input IIH/I IL Output I OH/IOL 20 A/-0.6 mA -1 mA/20 mA
(c) 1999 Fairchild Semiconductor Corporation
DS009457
www.fairchildsemi.com
74F08
Absolute Maximum Ratings(Note 1)
Storage Temperature Ambient Temperature under Bias Junction Temperature under Bias VCC Pin Potential to Ground Pin Input Voltage (Note 2) Input Current (Note 2) Voltage Applied to Output in HIGH State (with VCC = 0V) Standard Output 3-STATE Output Current Applied to Output in LOW State (Max) ESD Last Passing Voltage (Min) twice the rated IOL (mA) 4000V -0.5V to VCC -0.5V to +5.5V -65C to +150C -55C to +125C -55C to +150C -0.5V to +7.0V -0.5V to +7.0V -30 mA to +5.0 mA
Recommended Operating Conditions
Free Air Ambient Temperature Supply Voltage 0C to +70C +4.5V to +5.5V
Note 1: Absolute maximum ratings are values beyond which the device may be damaged or have its useful life impaired. Functional operation under these conditions is not implied. Note 2: Either voltage limit or current limit is sufficient to protect inputs.
DC Electrical Characteristics
Symbol VIH VIL VCD VOH VOL IIH IBVI ICEX VID IOD IIL IOS ICCH ICCL Parameter Input HIGH Voltage Input LOW Voltage Input Clamp Diode Voltage Output HIGH Voltage Output LOW Voltage Input HIGH Current Input HIGH Current Breakdown Test Output HIGH Leakage Current Input Leakage Test Output Leakage Circuit Current Input LOW Current Output Short-Circuit Current Power Supply Current Power Supply Current -60 5.5 8.6 4.75 3.75 -0.6 -150 8.3 12.9 5.0 7.0 50 A A A V A mA mA mA mA Max Max Max 0.0 0.0 Max Max Max Max VIN = 2.7V VIN = 7.0V VOUT = VCC IID = 1.9 A All Other Pins Grounded VIOD = 150 mV All Other Pins Grounded VIN = 0.5V VOUT = 0V VO = HIGH VO = LOW 10% VCC 5% VCC 10% VCC 2.5 2.7 0.5 Min 2.0 0.8 -1.2 Typ Max Units V V V V V Min Min Min VCC Conditions Recognized as a HIGH Signal Recognized as a LOW Signal IIN = -18 mA IOH = -1 mA IOH = -1 mA IOL = 20 mA
AC Electrical Characteristics
TA = +25C Symbol Parameter Min tPLH tPHL Propagation Delay An, Bn to On 3.0 2.5 VCC = +5.0V CL = 50 pF Typ 4.2 4.0 Max 5.6 5.3 TA = -55C to +125C VCC = +5.0V CL = 50 pF Min 2.5 2.0 Max 7.5 7.5 TA = 0C to +70C VCC = +5.0V CL = 50 pF Min 3.0 2.5 Max 6.6 6.3 ns Units
www.fairchildsemi.com
2
74F08
Physical Dimensions inches (millimeters) unless otherwise noted
14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-120, 0.150 Narrow Package Number M14A
14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Package Number M14D
3
www.fairchildsemi.com
74F08 Quad 2-Input AND Gate
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide Package Number N14A
Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com 4 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com

▲Up To Search▲

Price & Availability of 74F08PC

	To Download 74F08PC Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .