 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| CXA1915AN I-V Photo IC for MiniDisc Description The CXA1915AN is a photo IC developed as a photo detector for the optical pickup of MiniDisc. The photodiode for RF signal detection has a built-in I-V amplifier and features low output impedance for stable output. * Focus servo: astigmatic method * Tracking servo: three-spot method * Magneto optical signal (RF signal) detection: Wollaston prism method Features * I-V amplifier (current-voltage conversion circuit) * Ultra-compact transparent molded package (SSOP) Applications Optical pickup for MiniDisc Structure Bipolar silicon monolithic IC 16 pin PD-S (Plastic) Absolute Maximum Ratings (Ta=25C) * Supply voltage VCC 6 V * Operating temperature Topr -20 to 90 C * Storage temperature Tstg -40 to 90 C * Allowable power dissipation PD 150 mW Recommended Operating Conditions * Supply voltage VCC 2.5 to 5.5 V Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits. --1-- E94X43-TE CXA1915AN Photo Detector Pattern Dimensions 160 1.75 mm from reference side J Package center 5 B A 35 5 160 F 70 C D E 135 150 0.45 mm from package center 2.20 mm from reference side I 135 (Unit: m) Circuit Block Diagram Vcc 12 Jo 11 Bo 10 GND Ao Eo 9 8 7 R J B A E I F C D R 1 Vc 2 Io R=115k 3 GND 4 Fo 5 Co 6 Do A, B, C, D, E, F, I, and J are photodiodes. --2-- 145 CXA1915AN Electrical and Optical Characteristics Item Symbol Current consumption ICC Dark current (A to F) ID Optical sensitivity (A to F) S Output offset voltage (I, J) Voff Output offset voltage difference (I-J) Voff Output voltage (I, J) VO Maximum output voltage (I, J) Vomax Frequency response (I, J) fc Conditions In the dark In the dark PO=5W, = 780nm In the dark In the dark PO=5W, = 780nm PO=100W, = 780nm 100kHz reference, -3 dB (VCC=3.0V, VC=1.5V, Ta=25C) Min. Typ. 2.2 0.4 5.5 0 130 2.8 2.3 Max. 3.2 4.0 10 10 160 Unit mA nA A/W mV V MHz 0.3 -10 -10 100 2.7 1.8 Note) 1. Vc is reference for output voltage and output offset voltage. 2. GND is reference for maximum output voltage. 3. Output voltage and frequency response are subject to conformation of design. Measurement Circuit 100pF 3.0V 4k 1k 1k 1k 12 Vcc 11 Jo 10 Bo 9 GND 8 Ao 7 Eo Vc Io GND Fo Co Do 1 1.5V 2 3 4 5 6 100pF 4k 1k 1k 1k --3-- CXA1915AN Photo Detector Position Reference side 1.75 J Photo detector center I 0.45 1 0.38 2.20 Photo detector side Reference side (Unit: mm) Reference side Photo detector center Accuracy in position of photo detector (the reference side shown above is reference.) X, Y : 0.2 mm Z : 0.2 mm : 2 --4-- CXA1915AN Example of Representative Characteristics A to F dark current vs. Ambient temperature characteristics 100 VCC=3.0V, VC=1.5V in the dark state ID-Dark current (pA) 10 E, F 1 A to D 0.1 0 25 50 75 100 Ta-Ambient temperature (C) I and J offset voltage vs. Ambient temperature characteristics 10 VCC=3.0V, VC=1.5V in the dark state 8 Voff-Offset voltage (mV) 6 4 2 0 -25 0 25 50 75 100 Ta-Ambient temperature (C) Current consumption vs. Ambient temperature characteristics 5 In the dark state ICC-Current consumption (mA) 4 3 VCC=6.0V, VC=3.0V 2 VCC=3.0V, VC=1.5V 1 VCC=2.5V, VC=1.25V 0 -25 0 25 50 75 100 Ta-Ambient temperature (C) --5-- CXA1915AN Pin Description Pin No. Symbol I/O Equivalent circuit Description 129 1 VC I 1 For a dual positive/negative power supply: GND For a single power supply: center voltage input 500A 2 11 IO JO 129 O 2 11 16k 8k VC Output of electrical signals converted from optical signals 3 9 GND I For a dual positive/negative power supply: negative power supply For a single power supply: GND 4 5 6 7 8 10 FO CO DO EO AO BO 4 5 129 Light Photo current Photodiode O 6 7 8 10 Output of electrical signals converted from optical signals (cathode pin of photodiode) 12 VCC I Positive power supply --6-- CXA1915AN Notes on Operation 1. Connection to RF amplifiers In the CXA1915AN, the RF signals (I, J) are of the voltage-output type. Therefore, the RF amplifier should have an I-V amplifier at the input block because the servo signals (A to F) are of current-output type. 2. Power supply The CXA1915AN can be used either with a dual positive/negative power supply or with a single power supply. However, this IC is not provided with a center voltage generating circuit, and so when used with a single power supply the center voltage must be supplied by an RF amplifier or some other device. Power supply connections for each case are as follows. (12) VCC Dual positive/ negative power supply Single power supply Note) Positive power supply Positive power supply (3) (9) GND Negative power supply GND GND (1) VC Center voltage Pins 3 and 9 are shorted in the IC. For both a dual positive/negative power supply and a single power supply, the voltage difference between the Vcc and GND pins should be within the range of 2.5 V and 5.5 V. --7-- CXA1915AN Package Outline Unit : mm PD-S-16 1.8 0.2 0.985 0.1 3.5 0.1 0.145 0.1 15 1 (All sides) 2 Mirror 3.5 0.1 10 Datum plane 0.5 0.22 0.1 M + 0.1 0.1 - 0.05 A + 0.05 0.22 - 0.04 (0.2) 5.5 0.2 B 0 to 10 DETAIL A 0.5 0.15 DETAIL B NOTE: Dimension "" does not include mold protrusion. SONY CODE EIAJ CODE JEDEC CODE PACKAGE WEIGHT 0.04g PD-S-16 --8-- + 0.025 0.145 - 0.015 (0.125) |
Price & Availability of CXA1915AN
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |