![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
(R) KF00 SERIES VERY LOW DROP VOLTAGE REGULATORS WITH INHIBIT s s s s s s s s s s VERY LOW DROPOUT VOLTAGE (0.4V) VERY LOW QUIESCENT CURRENT (TYP. 50 A IN OFF MODE, 500A IN ON MODE) OUTPUT CURRENT UP TO 500 mA LOGIC-CONTROLLED ELECTRONIC SHUTDOWN OUTPUT VOLTAGES OF 1.25; 1.5; 2.5; 2.7; 3; 3.3; 3.5; 4; 4.5; 4.7; 5; 5.2; 5.5; 6; 8; 8.5; 12V INTERNAL CURRENT AND THERMAL LIMIT ONLY 2.2F FOR STABILITY AVAILABLE IN 2% ACCURACY AT 25 oC SUPPLY VOLTAGE REJECTION: 70 db (TYP.) TEMPERATURE RANGE: -40 TO 125 oC 3 1 SO-8 DPAK DESCRIPTION The KF00 series are very Low Drop regulators available in SO-8 package and in a wide range of output voltages. The very Low Drop voltage (0.4V) and the very low quiescent current make them particularly suitable for Low Noise, Low Power applications and specially in battery powered systems. SCHEMATIC DIAGRAM A Shutdown Logic Control function is available (pin 5, TTL compatible). This means that when the device is used as a local regulator, it is possible to put a part of the board in standby, decreasing the total power consumption. It requires only a 2.2 F capacitor for stability allowing space and cost saving. June 1998 1/16 KF00 ABSOLUTE MAXIMUM RATINGS Symb ol Vi Io Pt ot T stg To p DC Input Voltage Output Current Power Dissipation Storage Temperature Range Operating Junction Temperature Range Parameter Value -0.5 to 20 Internally limited Internally limited - 40 to 150 - 40 to 125 o o Uni t V C C THERMAL DATA Symb ol Parameter DPAK 8 SO-8 20 Unit o R t hj- case Thermal Resistance Junction-case C/W CONNECTION DIAGRAM (top view) SO-8 DPAK 2/16 KF00 ORDERING NUMBERS T ype KF12 (*) KF15 (*) KF25 KF27 KF30 KF33 KF35 (*) KF40 KF45 (*) KF47 KF50 KF52 KF55 (*) KF60 KF80 KF85 KF120 (*) Available on request SO-8 KF12BD KF15BD KF25BD KF27BD KF30BD KF33BD KF35BD KF40BD KF45BD KF47BD KF50BD KF52BD KF55BD KF60BD KF80BD KF85BD KF120BD DPAK KF12BDT KF15BDT KF25BDT KF27BDT KF30BDT KF33BDT KF35BDT KF40BDT KF45BDT KF47BDT KF50BDT KF52BDT KF55BDT KF60BDT KF80BDT KF85BDT KF120BDT Ou tpu t Vo ltage 1.25 V 1.5 V 2.5 V 2.7 V 3V 3.3 V 3.5 V 4V 4.5 V 4.75 V 5V 5.2 V 5.5 V 6V 8V 8.5V 12 V TEST CIRCUITS 3/16 KF00 ELECTRICAL CHARACTERISTICS FOR KF12 (refer to the test circuits, Tj = 25 oC, Ci = 0.1 F, Co = 2.2 F unless otherwise specified) Symb ol Vo Vi I out V o V o Id Parameter Output Voltage Operating Input Voltage Output Current Limit Line Regulation Load Regulation Quiescent Current V i = 2.5 to 20 V, Io = 5 mA V i = 2.8 V Io = 5 to 500 mA ON MODE V i = 2.5 to 20 V Io = 0 mA V i = 2.6 to 20 V Io = 500 mA OFF MODE Vi = 6 V SVR Supply Voltage Rejection Io = 5 mA Vi = 3.5 V 1V f = 120 Hz f = 1 KHz f = 10 KHz B = 10 Hz to 100 KHz Io = 200 mA -40 < Ta < 125 oC -40 < Ta < 125 C V i = 6 V, Vc = 6 V 2 ESR = 0.1 to 10 Io = 0 to 500 mA o T est Con ditio ns Io = 50 mA, Vi = 3.3 V o Io = 50 mA, Vi = 3.3 V -25 T yp. 1.25 Max. 1.275 1.3 20 Unit V V V A mV mV mA mA A dB dB dB V V 1 2 2 0.5 50 82 77 60 50 1.25 0.8 2 10 10 12 50 1 12 100 eN Vd V il V ih Ii CO Output Noise Voltage Dropout Voltage Control Input Logic Low Control Input Logic High Control Input Current Output Bypass Capacitance V V A F ELECTRICAL CHARACTERISTICS FOR KF15 (refer to the test circuits, Tj = 25 oC, Ci = 0.1 F, Co = 2.2 F unless otherwise specified) Symb ol Vo Vi I out V o V o Id Parameter Output Voltage Operating Input Voltage Output Current Limit Line Regulation Load Regulation Quiescent Current V i = 2.5 to 20 V, Io = 5 mA V i = 2.8 V Io = 5 to 500 mA ON MODE V i = 2.5 to 20 V Io = 0 mA V i = 2.8 to 20 V Io = 500 mA OFF MODE Vi = 6 V SVR Supply Voltage Rejection Io = 5 mA Vi = 3.5 V 1V f = 120 Hz f = 1 KHz f = 10 KHz B = 10 Hz to 100 KHz Io = 200 mA -40 < Ta < 125 C -40 < Ta < 125 oC V i = 6 V, Vc = 6 V 2 ESR = 0.1 to 10 Io = 0 to 500 mA 2 10 10 o T est Con ditio ns Io = 50 mA, Vi = 3.5 V Io = 50 mA, Vi = 3.5 V -25 T yp. 1.5 Max. 1.53 1.56 20 Unit V V V A mV mV mA mA A dB dB dB V V 1 2 2 0.5 50 82 77 60 50 1 0.8 12 50 1 12 100 eN Vd V il V ih Ii CO Output Noise Voltage Dropout Voltage Control Input Logic Low Control Input Logic High Control Input Current Output Bypass Capacitance V V A F 4/16 KF00 ELECTRICAL CHARACTERISTICS FOR KF25 (refer to the test circuits, Tj = 25 oC, Ci = 0.1 F, Co = 2.2 F unless otherwise specified) Symb ol Vo Vi I out V o V o Id Parameter Output Voltage Operating Input Voltage Output Current Limit Line Regulation Load Regulation Quiescent Current V i = 3.5 to 20 V, Io = 5 mA V i = 3.8 V Io = 5 to 500 mA ON MODE V i = 3.5 to 20 V Io = 0 mA V i = 3.8 to 20 V Io = 500 mA OFF MODE Vi = 6 V SVR Supply Voltage Rejection Io = 5 mA Vi = 4.5 V 1V f = 120 Hz f = 1 KHz f = 10 KHz B = 10 Hz to 100 KHz Io = 200 mA Io = 500 mA -40 < Ta < 125 C -40 < Ta < 125 oC V i = 6 V, Vc = 6 V 2 ESR = 0.1 to 10 Io = 0 to 500 mA 2 10 10 o T est Con ditio ns Io = 50 mA, Vi = 4.5 V o Io = 50 mA, Vi = 4.5 V -25 T yp. 2.5 Max. 2.55 2.6 20 Unit V V V A mV mV mA mA A dB dB dB V 1 2 2 0.5 50 82 77 60 50 0.2 0.4 0.35 0.7 0.8 12 50 1 12 100 eN Vd V il V ih Ii CO Output Noise Voltage Dropout Voltage Control Input Logic Low Control Input Logic High Control Input Current Output Bypass Capacitance V V V V A F ELECTRICAL CHARACTERISTICS FOR KF27 (refer to the test circuits, Tj = 25 oC, Ci = 0.1 F, Co = 2.2 F unless otherwise specified) Symb ol Vo Vi I out V o V o Id Parameter Output Voltage Operating Input Voltage Output Current Limit Line Regulation Load Regulation Quiescent Current V i = 3.7 to 20 V, Io = 5 mA Vi = 4 V Io = 5 to 500 mA ON MODE V i = 3.7 to 20 V Io = 0 mA V i = 4 to 20 V Io = 500 mA OFF MODE Vi = 6 V SVR Supply Voltage Rejection Io = 5 mA Vi = 4.7 V 1V f = 120 Hz f = 1 KHz f = 10 KHz B = 10 Hz to 100 KHz Io = 200 mA Io = 500 mA -40 < Ta < 125 oC -40 < Ta < 125 C V i = 6 V, Vc = 6 V 2 ESR = 0.1 to 10 Io = 0 to 500 mA o T est Con ditio ns Io = 50 mA, Vi = 4.7 V Io = 50 mA, Vi = 4.7 V -25 T yp. 2.7 Max. 2.754 2.808 20 Unit V V V A mV mV mA mA A dB dB dB V 1 2 2 0.5 50 82 77 60 50 0.2 0.4 2 10 10 0.35 0.7 0.8 12 50 1 12 100 eN Vd V il V ih Ii CO Output Noise Voltage Dropout Voltage Control Input Logic Low Control Input Logic High Control Input Current Output Bypass Capacitance V V V V A F 5/16 KF00 ELECTRICAL CHARACTERISTICS FOR KF30 (refer to the test circuits, Tj = 25 oC, Ci = 0.1 F, Co = 2.2 F unless otherwise specified) Symb ol Vo Vi I out V o V o Id Parameter Output Voltage Operating Input Voltage Output Current Limit Line Regulation Load Regulation Quiescent Current V i = 4 to 20 V, V i = 4.3 V Io = 5 mA Io = 5 to 500 mA T est Con ditio ns Io = 50 mA, Vi = 5 V o Io = 50 mA, Vi = 5 V -25 Min . 2.94 2.88 T yp. 3 Max. 3.06 3.12 20 12 50 1 12 100 Unit V V V A mV mV mA mA A dB dB dB V ON MODE Io = 0 mA V i = 4 to 20 V V i = 4.3 to 20 V Io = 500 mA OFF MODE Vi = 6 V Io = 5 mA Vi = 5 V 1V f = 120 Hz f = 1 KHz f = 10 KHz B = 10 Hz to 100 KHz Io = 200 mA Io = 500 mA -40 < Ta < 125 C -40 < Ta < 125 oC V i = 6 V, Vc = 6 V 2 ESR = 0.1 to 10 Io = 0 to 500 mA 2 SVR Supply Voltage Rejection eN Vd V il V ih Ii CO Output Noise Voltage Dropout Voltage Control Input Logic Low Control Input Logic High Control Input Current Output Bypass Capacitance 0.35 0.7 0.8 V V V V A F 10 10 ELECTRICAL CHARACTERISTICS FOR KF33 (refer to the test circuits, Tj = 25 oC, Ci = 0.1 F, Co = 2.2 F unless otherwise specified) Symb ol Vo Vi I out V o V o Id Parameter Output Voltage Operating Input Voltage Output Current Limit Line Regulation Load Regulation Quiescent Current V i = 4.3 to 20 V, V i = 4.6 V Io = 5 mA Io = 5 to 500 mA T est Con ditio ns Io = 50 mA, Vi = 5.3 V Io = 50 mA, Vi = 5.3 V -25 Min . 3.234 3.168 T yp. 3.3 Max. 3.366 3.432 20 12 50 1 12 100 Unit V V V A mV mV mA mA A dB dB dB V ON MODE V i = 4.3 to 20 V Io = 0 mA V i = 4.6 to 20 V Io = 500 mA OFF MODE Vi = 6 V Io = 5 mA Vi = 5.3 V 1V f = 120 Hz f = 1 KHz f = 10 KHz B = 10 Hz to 100 KHz Io = 200 mA Io = 500 mA -40 < Ta < 125 oC -40 < Ta < 125 C V i = 6 V, Vc = 6 V 2 ESR = 0.1 to 10 Io = 0 to 500 mA 2 SVR Supply Voltage Rejection eN Vd V il V ih Ii CO 6/16 Output Noise Voltage Dropout Voltage Control Input Logic Low Control Input Logic High Control Input Current Output Bypass Capacitance 0.35 0.7 0.8 V V V V A F 10 10 KF00 ELECTRICAL CHARACTERISTICS FOR KF35 (refer to the test circuits, Tj = 25 oC, Ci = 0.1 F, Co = 2.2 F unless otherwise specified) Symb ol Vo Vi I out V o V o Id Parameter Output Voltage Operating Input Voltage Output Current Limit Line Regulation Load Regulation Quiescent Current V i = 4.5 to 20 V, Io = 5 mA V i = 4.8 V Io = 5 to 500 mA ON MODE V i = 4.5 to 20 V Io = 0 mA V i = 4.8 to 20 V Io = 500 mA OFF MODE Vi = 6 V SVR Supply Voltage Rejection Io = 5 mA Vi = 5.5 V 1V f = 120 Hz f = 1 KHz f = 10 KHz B = 10 Hz to 100 KHz Io = 200 mA Io = 500 mA -40 < Ta < 125 C -40 < Ta < 125 oC V i = 6 V, Vc = 6 V 2 ESR = 0.1 to 10 Io = 0 to 500 mA 2 10 10 o T est Con ditio ns Io = 50 mA, Vi = 5.5 V o Io = 50 mA, Vi = 5.5 V -25 T yp. 3.5 Max. 3.57 3.64 20 Unit V V V A mV mV mA mA A dB dB dB V 1 2 2 0.5 50 79 74 60 50 0.2 0.4 0.35 0.7 0.8 12 50 1 12 100 eN Vd V il V ih Ii CO Output Noise Voltage Dropout Voltage Control Input Logic Low Control Input Logic High Control Input Current Output Bypass Capacitance V V V V A F ELECTRICAL CHARACTERISTICS FOR KF40 (refer to the test circuits, Tj = 25 oC, Ci = 0.1 F, Co = 2.2 F unless otherwise specified) Symb ol Vo Vi I out V o V o Id Parameter Output Voltage Operating Input Voltage Output Current Limit Line Regulation Load Regulation Quiescent Current V i = 5 to 20 V, V i = 5.3 V Io = 5 mA Io = 5 to 500 mA T est Con ditio ns Io = 50 mA, Vi = 6 V Io = 50 mA, Vi = 6 V -25 Min . 3.92 3.84 T yp. 4 Max. 4.08 4.16 20 18 50 1 12 100 Unit V V V A mV mV mA mA A dB dB dB V ON MODE Io = 0 mA V i = 5 to 20 V V i = 5.3 to 20 V Io = 500 mA OFF MODE Vi = 6 V Io = 5 mA Vi = 6 V 1V f = 120 Hz f = 1 KHz f = 10 KHz B = 10 Hz to 100 KHz Io = 200 mA Io = 500 mA -40 < Ta < 125 oC -40 < Ta < 125 C V i = 6 V, Vc = 6 V 2 ESR = 0.1 to 10 Io = 0 to 500 mA 2 SVR Supply Voltage Rejection eN Vd V il V ih Ii CO Output Noise Voltage Dropout Voltage Control Input Logic Low Control Input Logic High Control Input Current Output Bypass Capacitance 0.35 0.7 0.8 V V V V A F 7/16 10 10 KF00 ELECTRICAL CHARACTERISTICS FOR KF45 (refer to the test circuits, Tj = 25 oC, Ci = 0.1 F, Co = 2.2 F unless otherwise specified) Symb ol Vo Vi I out V o V o Id Parameter Output Voltage Operating Input Voltage Output Current Limit Line Regulation Load Regulation Quiescent Current V i = 5.5 to 20 V, Io = 5 mA V i = 5.8 V Io = 5 to 500 mA ON MODE V i = 5.5 to 20 V Io = 0 mA V i = 5.8 to 20 V Io = 500 mA OFF MODE Vi = 6 V SVR Supply Voltage Rejection Io = 5 mA Vi = 6.5 V 1V f = 120 Hz f = 1 KHz f = 10 KHz B = 10 Hz to 100 KHz Io = 200 mA Io = 500 mA -40 < Ta < 125 C -40 < Ta < 125 oC V i = 6 V, Vc = 6 V 2 ESR = 0.1 to 10 Io = 0 to 500 mA 2 10 10 o T est Con ditio ns Io = 50 mA, Vi = 6.5 V o Io = 50 mA, Vi = 6.5 V -25 T yp. 4.5 Max. 4.59 4.68 20 Unit V V V A mV mV mA mA A dB dB dB V 1 3 2 0.5 50 77 72 60 50 0.2 0.4 0.35 0.7 0.8 18 50 1 12 100 eN Vd V il V ih Ii CO Output Noise Voltage Dropout Voltage Control Input Logic Low Control Input Logic High Control Input Current Output Bypass Capacitance V V V V A F ELECTRICAL CHARACTERISTICS FOR KF47 (refer to the test circuits, Tj = 25 oC, Ci = 0.1 F, Co = 2.2 F unless otherwise specified) Symb ol Vo Vi I out V o V o Id Parameter Output Voltage Operating Input Voltage Output Current Limit Line Regulation Load Regulation Quiescent Current V i = 5.7 to 20 V, Io = 5 mA Vi = 6 V Io = 5 to 500 mA ON MODE V i = 5.7 to 20 V Io = 0 mA V i = 6 to 20 V Io = 500 mA OFF MODE Vi = 6 V SVR Supply Voltage Rejection Io = 5 mA Vi = 6.7 V 1V f = 120 Hz f = 1 KHz f = 10 KHz B = 10 Hz to 100 KHz Io = 200 mA Io = 500 mA -40 < Ta < 125 oC -40 < Ta < 125 C V i = 6 V, Vc = 6 V 2 ESR = 0.1 to 10 Io = 0 to 500 mA o T est Con ditio ns Io = 50 mA, Vi = 6.7 V Io = 50 mA, Vi = 6.7 V -25 T yp. 4.7 Max. 4.794 4.888 20 Unit V V V A mV mV mA mA A dB dB dB V 1 3 2 0.5 50 77 72 60 50 0.2 0.4 2 10 10 0.35 0.7 0.8 18 50 1 12 100 eN Vd V il V ih Ii CO 8/16 Output Noise Voltage Dropout Voltage Control Input Logic Low Control Input Logic High Control Input Current Output Bypass Capacitance V V V V A F KF00 ELECTRICAL CHARACTERISTICS FOR KF50 (refer to the test circuits, Tj = 25 oC, Ci = 0.1 F, Co = 2.2 F unless otherwise specified) Symb ol Vo Vi I out V o V o Id Parameter Output Voltage Operating Input Voltage Output Current Limit Line Regulation Load Regulation Quiescent Current V i = 6 to 20 V, V i = 6.3 V Io = 5 mA Io = 5 to 500 mA T est Con ditio ns Io = 50 mA, Vi = 7 V o Io = 50 mA, Vi = 7 V -25 Min . 4.9 4.8 T yp. 5 Max. 5.1 5.2 20 18 50 1 12 100 Unit V V V A mV mV mA mA A dB dB dB V ON MODE Io = 0 mA V i = 6 to 20 V V i = 6.3 to 20 V Io = 500 mA OFF MODE Vi = 6 V Io = 5 mA Vi =7 V 1V f = 120 Hz f = 1 KHz f = 10 KHz B = 10 Hz to 100 KHz Io = 200 mA Io = 500 mA -40 < Ta < 125 C -40 < Ta < 125 oC V i = 6 V, Vc = 6 V 2 ESR = 0.1 to 10 Io = 0 to 500 mA 2 SVR Supply Voltage Rejection eN Vd V il V ih Ii CO Output Noise Voltage Dropout Voltage Control Input Logic Low Control Input Logic High Control Input Current Output Bypass Capacitance 0.35 0.7 0.8 V V V V A F 10 10 ELECTRICAL CHARACTERISTICS FOR KF52 (refer to the test circuits, Tj = 25 oC, Ci = 0.1 F, Co = 2.2 F unless otherwise specified) Symb ol Vo Vi I out V o V o Id Parameter Output Voltage Operating Input Voltage Output Current Limit Line Regulation Load Regulation Quiescent Current V i = 6.2 to 20 V, V i = 6.5 V ON MODE V i = 6.2 to 20 V V i = 6.5 to 20 V Io = 5 mA Io = 5 to 500 mA Io = 0 mA Io = 500 mA T est Con ditio ns Io = 50 mA, Vi = 7.2 V Io = 50 mA, Vi = 7.2 V -25 Min . 5.096 4.992 T yp. 5.2 Max. 5.304 5.408 20 18 50 1 12 100 Unit V V V A mV mV mA mA A dB dB dB V OFF MODE Vi = 6 V SVR Supply Voltage Rejection Io = 5 mA Vi = 7.2 V 1V f = 120 Hz f = 1 KHz f = 10 KHz B = 10 Hz to 100 KHz Io = 200 mA Io = 500 mA -40 < Ta < 125 oC -40 < Ta < 125 C V i = 6 V, Vc = 6 V 2 ESR = 0.1 to 10 Io = 0 to 500 mA 2 eN Vd V il V ih Ii CO Output Noise Voltage Dropout Voltage Control Input Logic Low Control Input Logic High Control Input Current Output Bypass Capacitance 0.35 0.7 0.8 V V V V A F 9/16 10 10 KF00 ELECTRICAL CHARACTERISTICS FOR KF55 (refer to the test circuits, Tj = 25 oC, Ci = 0.1 F, Co = 2.2 F unless otherwise specified) Symb ol Vo Vi I out V o V o Id Parameter Output Voltage Operating Input Voltage Output Current Limit Line Regulation Load Regulation Quiescent Current V i = 6.5 to 20 V, V i = 6.8 V ON MODE V i = 6.5 to 20 V V i = 6.8 to 20 V Io = 5 mA Io = 5 to 500 mA Io = 0 mA Io = 500 mA T est Con ditio ns Io = 50 mA, Vi = 7.5 V o Io = 50 mA, Vi = 7.5 V -25 Min . 5.39 5.28 T yp. 5.5 Max. 5.61 5.72 20 18 50 1 12 100 Unit V V V A mV mV mA mA A dB dB dB V OFF MODE Vi = 6 V SVR Supply Voltage Rejection Io = 5 mA Vi =7.5 V 1V f = 120 Hz f = 1 KHz f = 10 KHz B = 10 Hz to 100 KHz Io = 200 mA Io = 500 mA -40 < Ta < 125 C -40 < Ta < 125 oC V i = 6 V, Vc = 6 V 2 ESR = 0.1 to 10 Io = 0 to 500 mA 2 eN Vd V il V ih Ii CO Output Noise Voltage Dropout Voltage Control Input Logic Low Control Input Logic High Control Input Current Output Bypass Capacitance 0.35 0.7 0.8 V V V V A F 10 10 ELECTRICAL CHARACTERISTICS FOR KF60 (refer to the test circuits, Tj = 25 oC, Ci = 0.1 F, Co = 2.2 F unless otherwise specified) Symb ol Vo Vi I out V o V o Id Parameter Output Voltage Operating Input Voltage Output Current Limit Line Regulation Load Regulation Quiescent Current V i = 7 to 20 V, V i = 7.3 V ON MODE V i = 7 to 20 V V i = 7.3 to 20 V Io = 5 mA Io = 5 to 500 mA Io = 0 mA Io = 500 mA T est Con ditio ns Io = 50 mA, Vi = 8 V Io = 50 mA, Vi = 8 V -25 Min . 5.88 5.76 T yp. 6 Max. 6.12 6.24 20 24 50 1.5 12 140 Unit V V V A mV mV mA mA A dB dB dB V OFF MODE Vi = 9 V SVR Supply Voltage Rejection Io = 5 mA Vi = 8 V 1V f = 120 Hz f = 1 KHz f = 10 KHz B = 10 Hz to 100 KHz Io = 200 mA Io = 500 mA -40 < Ta < 125 oC -40 < Ta < 125 C V i = 9 V, Vc = 6 V 2 ESR = 0.1 to 10 Io = 0 to 500 mA 2 eN Vd V il V ih Ii CO 10/16 Output Noise Voltage Dropout Voltage Control Input Logic Low Control Input Logic High Control Input Current Output Bypass Capacitance 0.35 0.7 0.8 V V V V A F 10 10 KF00 ELECTRICAL CHARACTERISTICS FOR KF80B (refer to the test circuits, Tj = 25 oC, Ci = 0.1 F, Co = 2.2 F unless otherwise specified) Symb ol Vo Vi I out V o V o Id Parameter Output Voltage Operating Input Voltage Output Current Limit Line Regulation Load Regulation Quiescent Current V i = 9 to 20 V, V i = 9.3 V Io = 5 mA Io = 5 to 500 mA T est Con ditio ns Io = 50 mA, Vi = 10 V o Io = 50 mA, Vi = 10 V -25 Min . 7.84 7.68 T yp. 8 Max. 8.16 8.32 20 24 50 1.5 12 140 Unit V V V A mV mV mA mA A dB dB dB V ON MODE Io = 0 mA V i = 9 to 20 V V i = 9.3 to 20 V Io = 500 mA OFF MODE Vi = 9 V Io = 5 mA Vi =10 V 1V f = 120 Hz f = 1 KHz f = 10 KHz B = 10 Hz to 100 KHz Io = 200 mA Io = 500 mA -40 < Ta < 125 C -40 < Ta < 125 oC V i = 9 V, Vc = 6 V 2 ESR = 0.1 to 10 Io = 0 to 500 mA 2 SVR Supply Voltage Rejection eN Vd V il V ih Ii CO Output Noise Voltage Dropout Voltage Control Input Logic Low Control Input Logic High Control Input Current Output Bypass Capacitance 0.35 0.7 0.8 V V V V A F 10 10 ELECTRICAL CHARACTERISTICS FOR KF85B (refer to the test circuits, Tj = 25 oC, Ci = 0.1 F, Co = 2.2 F unless otherwise specified) Symb ol Vo Vi I out V o V o Id Parameter Output Voltage Operating Input Voltage Output Current Limit Line Regulation Load Regulation Quiescent Current V i = 9.5 to 20 V, V i = 9.8 V ON MODE V i = 9.5 to 20 V V i = 9.8 to 20 V Io = 5 mA Io = 5 to 500 mA Io = 0 mA Io = 500 mA T est Con ditio ns Io = 50 mA, Vi = 10.5V Io = 50 mA, Vi = 10.5V -25 Min . 8.33 8.16 T yp. 8.5 Max. 8.67 8.84 20 24 50 1.5 12 140 Unit V V V A mV mV mA mA A dB dB dB V OFF MODE Vi = 10 V SVR Supply Voltage Rejection Io = 5 mA Vi = 10.5 V 1V f = 120 Hz f = 1 KHz f = 10 KHz B = 10 Hz to 100 KHz Io = 200 mA Io = 500 mA -40 < Ta < 125 oC -40 < Ta < 125 C V i = 10 V, Vc = 6 V 2 ESR = 0.1 to 10 Io = 0 to 500 mA 2 eN Vd V il V ih Ii CO Output Noise Voltage Dropout Voltage Control Input Logic Low Control Input Logic High Control Input Current Output Bypass Capacitance 0.35 0.7 0.8 V V V V A F 11/16 10 10 KF00 ELECTRICAL CHARACTERISTICS FOR KF120B (refer to the test circuits, T j = 25 oC, Ci = 0.1 F, Co = 2.2 F unless otherwise specified) Symb ol Vo Vi I out V o V o Id Parameter Output Voltage Operating Input Voltage Output Current Limit Line Regulation Load Regulation Quiescent Current V i = 13 to 20 V, V i = 13.3 V ON MODE V i = 13 to 20 V V i = 13.3 to 20 V Io = 5 mA Io = 5 to 500 mA Io = 0 mA Io = 500 mA T est Con ditio ns Io = 50 mA, Vi = 14 V o Io = 50 mA, Vi = 14 V -25 Min . 11.76 11.52 T yp. 12 Max. 12.24 12.48 20 48 50 1.5 12 140 Unit V V V A mV mV mA mA A dB dB dB V OFF MODE Vi = 13 V SVR Supply Voltage Rejection Io = 5 mA Vi = 14 V 1V f = 120 Hz f = 1 KHz f = 10 KHz B = 10 Hz to 100 KHz Io = 200 mA Io = 500 mA -40 < Ta < 125 C -40 < Ta < 125 oC V i = 13 V, Vc = 6 V 2 ESR = 0.1 to 10 Io = 0 to 500 mA 2 eN Vd V il V ih Ii CO Output Noise Voltage Dropout Voltage Control Input Logic Low Control Input Logic High Control Input Current Output Bypass Capacitance 0.35 0.7 0.8 V V V V A F 10 10 12/16 KF00 TYPICAL PERFORMANCE CHARACTERISTICS (unless otherwise specified Vo(NOM) = 3.3V) Dropout Voltage vs Output Current Dropout Voltage vs Temperature Supply Current vs Input Voltage Supply Current vs Input Voltage Short Circuit Current vs Input Voltage Supply Voltage Rejection vs Input Voltage 13/16 KF00 SO-8 MECHANICAL DATA DIM. MIN. A a1 a2 a3 b b1 C c1 D E e e3 F L M S 3.8 0.4 4.8 5.8 1.27 3.81 4.0 1.27 0.6 8 (max.) 0.14 0.015 5.0 6.2 0.65 0.35 0.19 0.25 0.1 mm TYP. MAX. 1.75 0.25 1.65 0.85 0.48 0.25 0.5 45 (typ.) 0.188 0.228 0.050 0.150 0.157 0.050 0.023 0.196 0.244 0.025 0.013 0.007 0.010 0.003 MIN. inch TYP. MAX. 0.068 0.009 0.064 0.033 0.018 0.010 0.019 0016023 14/16 KF00 TO-252 (DPAK) MECHANICAL DATA mm MIN. A A1 A2 B B2 C C2 D E G H L2 L4 0.6 2.2 0.9 0.03 0.64 5.2 0.45 0.48 6 6.4 4.4 9.35 0.8 1 0.023 TYP. MAX. 2.4 1.1 0.23 0.9 5.4 0.6 0.6 6.2 6.6 4.6 10.1 MIN. 0.086 0.035 0.001 0.025 0.204 0.017 0.019 0.236 0.252 0.173 0.368 0.031 0.039 inch TYP. MAX. 0.094 0.043 0.009 0.035 0.212 0.023 0.023 0.244 0.260 0.181 0.397 DIM. H A C2 C DETAIL "A" A1 L2 D DETAIL "A" B = = 3 B2 = = G E 2 L4 1 = = A2 0068772-B 15/16 KF00 Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specification mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a trademark of STMicroelectronics (c) 1998 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - France - Germany - Italy - Japan - Korea - Malaysia - Malta - Morocco - The Netherlands Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A. . 16/16 |
Price & Availability of KF120
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |