|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
NC7SZ373 TinyLogic UHS D-Type Latch with 3-STATE Output June 1998 Revised May 2003 NC7SZ373 TinyLogic UHS D-Type Latch with 3-STATE Output General Description The NC7SZ373 is a single positive edge-triggered D-type CMOS Latch with 3-STATE output from Fairchild's Ultra High Speed Series of TinyLogic in the space saving SC70 6-lead package. The device is fabricated with advanced CMOS technology to achieve ultra high speed with high output drive while maintaining low static power dissipation over a very broad VCC operating range. The device is specified to operate over the 1.65V to 5.5V range. The inputs and output are high impedance when VCC is 0V. Inputs tolerate voltages up to 7V independent of VCC operating voltage. The latch appears transparent to the data when Latch Enable (LE) is HIGH. When LE is LOW, the data that meets the setup time is latched. The output tolerates voltages above VCC in the 3-STATE condition. Features s Space saving SC70 6-lead package s Ultra small MicroPak leadless package s Ultra High Speed; tPD 2.6 ns Typ into 50 pF at 5V VCC s High Output Drive; 24 mA at 3V VCC s Broad VCC Operating Range; 1.65V to 5.5V s Matches the performance of LCX when operated at 3.3V VCC s Power down high impedance inputs/output s Overvoltage tolerant inputs facilitate 5V to 3V translation s Patented noise/EMI reduction circuitry implemented Ordering Code: Order Number NC7SZ373P6X NC7SZ373L6X Package Number MAA06A MAC06A Product Code Top Mark Z73 D4 Package Description 6-Lead SC70, EIAJ SC88, 1.25mm Wide 6-Lead MicroPak, 1.0mm Wide Supplied As 3k Units on Tape and Reel 5k Units on Tape and Reel TinyLogic is a registered trademark of Fairchild Semiconductor Corporation. MicroPak is a trademark of Fairchild Semiconductor Corporation. (c) 2003 Fairchild Semiconductor Corporation DS500157 www.fairchildsemi.com NC7SZ373 Logic Symbol IEEE/IEC Connection Diagrams Pin Assignments for SC70 Pin Descriptions Pin Names D LE OE Q Description Data Input Latch Enable Input Output Enable Input Latch Output Pin One Orientation Diagram (Top View) Function Table Inputs LE H H L X D L H X X OE L L L H Output Q L H Qn-1 Z Pad Assignments for MicroPak AAA = Product Code Top Mark - see ordering code Note: Orientation of Top Mark determines Pin One location. Read the top product code mark left to right, Pin One is the lower left pin.(see diagram). H = HIGH Logic Level X = Immaterial L = LOW Logic Level Z = HIGH Impedance Qn-1 = Previous state prior to HIGH-to-LOW transition of latch enable (Top Thru View) www.fairchildsemi.com 2 NC7SZ373 Absolute Maximum Ratings(Note 1) Supply Voltage (VCC) DC Input Voltage (VIN) DC Output Voltage (VOUT) DC Input Diode Current (IIK) VIN < 0V DC Output Diode Current (IOK) VOUT < 0V DC Output (IOUT) Source/Sink Current DC VCC/GND Current (ICC/IGND) Storage Temperature Range (TSTG) Junction Temperature under Bias (TJ) Junction Lead Temperature (TL) (Soldering, 10 seconds) Power Dissipation (PD) @+85C 260C 180 mW -0.5V to +7.0V -0.5V to +7.0V -0.5V to +7.0V -50 mA -50 mA 50 mA 50 mA -65C to +150C 150C Recommended Operating Conditions (Note 2) Power Supply Operating (VCC ) Data Retention Input Voltage (VIN) Output Voltage (VOUT) Active State 3-STATE Input Rise and Fall Time (tr, tf) VCC = 1.8V, 2.5V 0.2V VCC = 3.3V 0.3V VCC = 5.5V 0.5V Operating Temperature (TA) Thermal Resistance (JA) 0 to 20 ns/V 0 to 10 ns/V 0 to 5 ns/V 0V to VCC 0V to 5.5V 1.65V to 5.5V 1.5V to 5.5V 0V to 5.5V -40C to +85C 350 C/W Note 1: The "Absolute Maximum Ratings": are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The "Recommended Operating Conditions" table will define the conditions for actual device operation. Note 2: Unused inputs must be held HIGH or LOW. They may not float. DC Electrical Characteristics Symbol VIH VIL VOH Parameter HIGH Level Control Input Voltage LOW Level Control Input Voltage HIGH Level Control Output Voltage VCC (V) 2.3 to 5.5 1.65 to 1.95 2.3 to 5.5 1.65 1.8 2.3 3.0 4.5 1.65 2.3 3.0 3.0 4.5 VOL LOW Level Control Output Voltage 1.65 1.8 2.3 3.0 4.5 1.65 2.3 3.0 3.0 4.5 IIN IOZ IOFF ICC Input Leakage Current 3-STATE Output Leakage Power-Off Leakage Current Quiescent Supply Current 0 to 5.5 1.65 to 5.5 0.0 1.65 to 5.5 1.55 1.7 2.2 2.9 4.4 1.24 1.9 2.4 2.3 3.8 1.65 1.8 2.3 3.0 4.5 1.52 2.15 2.8 2.68 4.2 0.0 0.0 0.0 0.0 0.0 0.08 0.10 0.15 0.22 0.22 0.08 0.1 0.1 0.1 0.1 0.24 0.3 0.4 0.55 0.55 0.1 0.5 1.0 1.0 Min 0.7 VCC 0.25 VCC 0.3 VCC 1.55 1.7 2.2 2.9 4.4 1.29 1.9 2.4 2.3 3.8 0.0 0.1 0.1 0.1 0.1 0.24 0.3 0.4 0.55 0.55 1.0 5.0 10 10 A A A A V VIN = VIL IOL = 4 mA IOL = 8 mA IOL = 16 mA IOL = 24 mA IOL = 32 mA 0 VIN 5.5V VIN = VIL or VIH 0 VOUT 5.5V VIN or VOUT = 5.5V VIN = 5.5V, GND IOL = 100 A V VIN = VIH IOH = -4 mA IOH = -8 mA IOH = -16 mA IOH = -24 mA IOH = -32 mA IOH = -100 A 1.65 to 1.95 0.75 VCC TA = +25C Typ Max TA = -40C to +85C Min 0.75 VCC 0.7 VCC 0.25 VCC 0.3 VCC Max Unit V V Conditions 3 www.fairchildsemi.com NC7SZ373 AC Electrical Characteristics Symbol tPLH tPHL Parameter Propagation Delay D to Q VCC (V) 1.65 1.8 2.5 0.2 3.3 0.3 5.0 0.5 3.3 0.3 5.0 0.5 tPLH tPHL Propagation Delay LE to Q 1.65 1.8 2.5 0.2 3.3 0.3 5.0 0.5 3.3 0.3 5.0 0.5 tPZL tPZH Output Enable Time 1.65 1.8 2.5 0.2 3.3 0.3 5.0 0.5 tPLZ tPHZ Output Disable Time 1.65 1.8 2.5 0.2 3.3 0.3 5.0 0.5 tS Setup Time, D to LE tH Hold Time, D to LE tW Pulse Width, LE 2.5 0.2 3.3 0.3 5.0 0.5 2.5 0.2 3.3 0.3 5.0 0.5 2.5 0.2 3.3 0.3 5.0 0.5 Min 2.0 2.0 1.5 1.0 1.0 1.5 1.0 2.0 2.0 1.8 1.3 1.0 1.5 1.3 2.0 2.0 2.0 1.5 1.0 2.0 2.0 2.0 1.5 1.0 TA = +25C Typ 9.0 6.1 3.6 2.7 2.0 3.3 2.6 9.0 6.0 3.5 2.6 2.0 3.3 2.6 9.0 6.0 3.7 2.8 2.2 7.7 5.1 3.5 2.8 2.3 Max 15.0 10.0 6.5 4.6 3.4 5.5 4.3 1.45 9.6 6.1 4.4 3.2 5.3 4.2 13.5 9.0 6.0 5.0 3.7 12.0 8.0 6.0 4.5 3.7 TA = -40C to +85C Min 2.0 2.0 1.6 1.2 1.0 1.5 1.3 2.0 2.0 1.5 1.0 0.8 1.5 1.2 2.0 2.0 1.8 1.4 1.0 2.0 2.0 1.8 1.4 1.0 2.0 1.5 1.5 1.5 1.5 1.5 3.0 3.0 3.0 ns CL = 50 pF RD = 500 , S1 = Open Figures 1, 5 ns CL = 50 pF RD = 500 , S1 = Open Figures 1, 5 ns Max 16.0 10.5 6.8 5.0 3.7 6.2 4.8 15.0 10.0 6.6 4.8 3.5 6.2 4.6 14.6 9.5 6.6 5.3 3.9 13.0 8.5 6.3 4.7 3.9 ns CL = 50 pF, VI = 2x VCC RU, RD = 500 S1 = GND for tPHZ S1 = VI for tPLZ CL = 50 pF RD = 500 , S1 = Open Figures 1, 5 Figures 1, 4 ns CL = 50 pF, VI = 2x VCC RU, RD = 500 S1 = GND for tPZH S1 = VI for tPZL Figures 1, 4 ns CL = 15 pF RD = 1 M S1 = Open CL = 50 pF RD = 500, S1 = Open Figures 1, 4 Figures 1, 3 ns CL = 15 pF RD = 1 M S1 = Open CL = 50 pF RD = 500, S1 = Open Figures 1, 3 Figures 1, 3 Units Conditions Figure Number Capacitance (Note 3) Symbol CIN COUT CPD Parameter Input Capacitance Output Capacitance Power Dissipation Capacitance (Note 4) Note 3: TA = +25C, f = 1 MHz. Note 4: C PD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current consumption (ICCD ) at no output loading and operating at 50% duty cycle. (See Figure 2) CPD is related to ICCD dynamic operating current by the expression: ICCD = (CPD)(VCC)(fIN) + (ICCstatic). Typ 3 4 14 17 Max Units pF pF pF Conditions VCC = Open, V IN = 0V or VCC VCC = 3.3V, V IN = 0V or VCC VCC = 3.3V VCC = 5.0V www.fairchildsemi.com 4 NC7SZ373 AC Loading and Waveforms CL includes load and stray capacitance Input PRR = 1.0 MHz, tw = 500 ns D Input = AC Waveform; tr = tf = 1.8 ns; D Input PRR = 10 MHz; Duty Cycle = 50% FIGURE 1. AC Test Circuit FIGURE 2. ICCD Test Circuit FIGURE 3. AC Waveforms FIGURE 4. AC Waveforms FIGURE 5. AC Waveforms 5 www.fairchildsemi.com NC7SZ373 Tape and Reel Specification TAPE FORMAT for SC70 Package Designator P6X Tape Section Leader (Start End) Carrier Trailer (Hub End) TAPE DIMENSIONS inches (millimeters) Number Cavities 125 (typ) 3000 75 (typ) Cavity Status Empty Filled Empty Cover Tape Status Sealed Sealed Sealed Package SC70-6 Tape Size 8 mm DIM A 0.093 (2.35) DIM B 0.096 (2.45) DIM F (3.5 0.10) DIM Ko (1.35 0.10) DIM P1 0.157 (4) DIM W 0.315 0.004 (8 0.1) 0.138 0.004 0.053 0.004 www.fairchildsemi.com 6 NC7SZ373 Tape and Reel Specification TAPE FORMAT for MicroPak Package Designator L6X Tape Section Leader (Start End) Carrier Trailer (Hub End) (Continued) Number Cavities 125 (typ) 3000 75 (typ) Cavity Status Empty Filled Empty Cover Tape Status Sealed Sealed Sealed REEL DIMENSIONS inches (millimeters) Tape Size 8 mm A 7.0 (177.8) B 0.059 (1.50) C 0.512 (13.00) D 0.795 (20.20) N 2.165 (55.00) W1 0.331 + 0.059/-0.000 (8.40 + 1.50/-0.00) 7 W2 0.567 (14.40) W3 W1 + 0.078/-0.039 (W1 + 2.00/-1.00) www.fairchildsemi.com NC7SZ373 Physical Dimensions inches (millimeters) unless otherwise noted 6-Lead SC70, EIAJ SC88, 1.25mm Wide Package Number MAA06A www.fairchildsemi.com 8 NC7SZ373 TinyLogic UHS D-Type Latch with 3-STATE Output Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 6-Lead MicroPak, 1.0mm Wide Package Number MAC06A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 9 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com www.fairchildsemi.com |
Price & Availability of NC7SZ373 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |