View 74LVT86_54271.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

INTEGRATED CIRCUITS
74LVT86 3.3V Quad 2-input exclusive-OR gate
Product specification IC24 Data Handbook 1996 Sep 10
Philips Semiconductors
Philips Semiconductors
Product specification
3.3V Quad 2-input exclusive-OR gate
74LVT86
QUICK REFERENCE DATA
SYMBOL tPLH tPHL CIN ICCL PARAMETER Propagation delay An or Bn to Yn Input capacitance Total supply current CONDITIONS Tamb = 25C; GND = 0V CL = 50pF; VCC = 3.3V VI = 0V or 3.0V Outputs Low; VCC = 3.6V TYPICAL 3.4 3.5 3 1 UNIT
FUNCTION TABLE
INPUTS Dna L ns pF mA L H H NOTES: H = High voltage level L = Low voltage level Dnb L H L H OUTPUT Qn L H H L
PIN CONFIGURATION
A0 B0 Y0 A1 B1 Y1 GND 1 2 3 4 5 6 7 14 13 12 11 10 9 8 VCC
LOGIC SYMBOL (IEEE/IEC)
1 B3 2 A3 Y3 B2 A2 Y2 9 8 4 6 5
=
3
SV00062
10
PIN DESCRIPTION
PIN NUMBER 1, 2, 4, 5, 9, 10, 12, 13 3, 6, 8, 11 7 14 SYMBOL An, Bn Yn GND VCC NAME AND FUNCTION
12 11 13
SF00091
Data inputs
LOGIC SYMBOL
Data outputs Ground (0V) Positive supply voltage
A0 B0 A1 B1 A2 B2 A3 B3 1 2 4 5 9 10 12 13
LOGIC DIAGRAM
A0 B0 A1 B1 A2 B2 VCC = Pin 14 GND = Pin 7 A3 B3 1 2 4 5 9 10 12 13 11 3 Y0 Y1 Y2 Y3 Y0
6
Y1
VCC = Pin 14 GND = Pin 7
3
6
8
11
8
SV00063
Y2
Y3
SV00064
ORDERING INFORMATION
PACKAGES 14-Pin Plastic SO 14-Pin Plastic SSOP 14-Pin Plastic TSSOP TEMPERATURE RANGE -40C to +85C -40C to +85C -40C to +85C OUTSIDE NORTH AMERICA 74LVT86 D 74LVT86 DB 74LVT86 PW NORTH AMERICA 74LVT86 D 74LVT86 DB 74LVT86PW DH DWG NUMBER SOT108-1 SOT337-1 SOT402-1
1996 Sep 10
2
853-1877 17273
Philips Semiconductors
Product specification
3.3V Quad 2-input exclusive-OR gate
74LVT86
ABSOLUTE MAXIMUM RATINGS1, 2
SYMBOL VCC IIK VI IOK VOUT IOUT Tstg PARAMETER DC supply voltage DC input diode current DC input voltage3 VO < 0 Output in Off or High state Output in High state DC output current Output in Low state Storage temperature range 64 -65 to 150 C VI < 0 CONDITIONS RATING -0.5 to +4.6 -50 -0.5 to +7.0 -50 -0.5 to +7.0 -32 mA UNIT V mA V mA V
DC output diode current DC output voltage3
NOTES: 1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. 2. The performance capability of a high-performance integrated circuit in conjunction with its thermal environment can create junction temperatures which are detrimental to reliability. The maximum junction temperature of this integrated circuit should not exceed 150C. 3. The input and output negative voltage ratings may be exceeded if the input and output clamp current ratings are observed.
RECOMMENDED OPERATING CONDITIONS
LIMITS SYMBOL VCC VI VIH VIL IOH IOL t/v Tamb DC supply voltage Input voltage High-level input voltage Low-level Input voltage High-level output current Low-level output current Input transition rise or fall rate; Outputs enabled Operating free-air temperature range -40 PARAMETER MIN 2.7 0 2.0 0.8 -20 32 10 +85 MAX 3.6 5.5 V V V V mA mA ns/V C UNIT
1996 Sep 10
3
Philips Semiconductors
Product specification
3.3V Quad 2-input exclusive-OR gate
74LVT86
DC ELECTRICAL CHARACTERISTICS
Over recommended operating conditions Voltages are referenced to GND (ground = 0V) LIMITS SYMBOL PARAMETER TEST CONDITIONS Temp = -40C to +85C MIN VIK Input clamp voltage VCC = 2.7V; IIK = -18mA VCC = 2.7 to 3.6V; IOH = -100A VOH High-level output voltage VCC = 2.7V; IOH = -6mA VCC = 3.0V; IOH = -20mA VCC = 2.7V; IOL = 100A VOL Low-level output voltage VCC = 2.7V; IOL = 24mA VCC = 3.0V; IOL = 32mA II IOFF ICCH Quiescent supply current ICCL ICC CI Additional supply current per input pin2 Input capacitance Input leakage current Output off current VCC = 0 or 3.6V; VI = 5.5V VCC = 3.6V; VI = VCC or GND VCC = 0V; VI or VO = 0 to 4.5V VCC = 3.6V; Outputs High, VI = GND or VCC, IO = 0 VCC = 3.6V; Outputs Low, VI = GND or VCC, IO = 0 VCC = 3V to 3.6V; One input at VCC-0.6V, Other inputs at VCC or GND VI = 3V or 0 3 1 VCC-0.2 2.4 2.0 0.2 0.5 0.5 10 1 100 0.02 mA 2 0.2 A pF A A V V TYP1 MAX -1.2 V UNIT
NOTES: 1. All typical values are at VCC = 3.3V and Tamb = 25C. 2. This is the increase in supply current for each input at the specified voltage level other than VCC or GND.
AC CHARACTERISTICS
GND = 0V; tR = tF = 2.5ns; CL = 50pF, RL = 500; Tamb = -40C to +85C. LIMITS SYMBOL PARAMETER WAVEFORM MIN tPLH tPHL tPLH tPHL Propagation delay An or Bn to Yn (other input Low) Propagation delay An or Bn to Yn (other input High) 1 1.0 1.0 1.0 1.0 VCC = 3.3V 0.3V TYP1 3.0 3.5 3.4 3.1 MAX 4.2 5.1 5.2 4.2 VCC = 2.7V MAX 5.3 5.6 6.3 4.4 ns UNIT
2
ns
NOTE: 1. All typical values are at VCC = 3.3V and Tamb = 25C.
1996 Sep 10
4
Philips Semiconductors
Product specification
3.3V Quad 2-input exclusive-OR gate
74LVT86
AC WAVEFORMS
VM = 1.5V, VIN = GND to 2.7V
VIN VM tPLH VIN tPHL
VM
VM tPHL
VM tPLH
VOUT
VM
VM
VOUT
VM
VM
SF00092
SF00093
Waveform 1. Propagation Delay for Non-Inverting Outputs
Waveform 2. Propagation Delay for Inverting Outputs
TEST CIRCUIT AND WAVEFORMS
VCC 90% NEGATIVE PULSE VIN PULSE GENERATOR RT D.U.T. CL RL POSITIVE PULSE VOUT VM 10% tTHL (tF) tTLH (tR) 90% VM tW 90% VM 10% 0V 10% 0V tTLH (tR) tTHL (tF) AMP (V) tW VM 90% AMP (V)
Test Circuit for Outputs
10%
VM = 1.5V Input Pulse Definition
DEFINITIONS
RL = Load resistor; see AC CHARACTERISTICS for value. CL = Load capacitance includes jig and probe capacitance; see AC CHARACTERISTICS for value. RT = Termination resistance should be equal to ZOUT of pulse generators.
INPUT PULSE REQUIREMENTS FAMILY Amplitude 74LVT 2.7V Rep. Rate 10MHz tW tR tF
500ns 2.5ns 2.5ns
SV00022
1996 Sep 10
5
Philips Semiconductors
Product specification
3.3V Quad 2-input exclusive-OR gate
74LVT86
SO14: plastic small outline package; 14 leads; body width 3.9 mm
SOT108-1
1996 Sep 10
6
Philips Semiconductors
Product specification
3.3V Quad 2-input exclusive-OR gate
74LVT86
SSOP14: plastic shrink small outline package; 14 leads; body width 5.3 mm
SOT337-1
1996 Sep 10
7
Philips Semiconductors
Product specification
3.3V Quad 2-input exclusive-OR gate
74LVT86
TSSOP14: plastic thin shrink small outline package; 14 leads; body width 4.4 mm
SOT402-1
1996 Sep 10
8
Philips Semiconductors
Product specification
3.3V Quad 2-input exclusive-OR gate
74LVT86
NOTES
1996 Sep 10
9
Philips Semiconductors
Product specification
3.3V Quad 2-input exclusive-OR gate
74LVT86
DEFINITIONS
Data Sheet Identification
Objective Specification
Product Status
Formative or in Design
Definition
This data sheet contains the design target or goal specifications for product development. Specifications may change in any manner without notice. This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. This data sheet contains Final Specifications. Philips Semiconductors reserves the right to make changes at any time without notice, in order to improve design and supply the best possible product.
Preliminary Specification
Preproduction Product
Product Specification
Full Production
Philips Semiconductors and Philips Electronics North America Corporation reserve the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. LIFE SUPPORT APPLICATIONS Philips Semiconductors and Philips Electronics North America Corporation Products are not designed for use in life support appliances, devices, or systems where malfunction of a Philips Semiconductors and Philips Electronics North America Corporation Product can reasonably be expected to result in a personal injury. Philips Semiconductors and Philips Electronics North America Corporation customers using or selling Philips Semiconductors and Philips Electronics North America Corporation Products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors and Philips Electronics North America Corporation for any damages resulting from such improper use or sale. Philips Semiconductors 811 East Arques Avenue P.O. Box 3409 Sunnyvale, California 94088-3409 Telephone 800-234-7381 Philips Semiconductors and Philips Electronics North America Corporation register eligible circuits under the Semiconductor Chip Protection Act. (c) Copyright Philips Electronics North America Corporation 1996 All rights reserved. Printed in U.S.A.

▲Up To Search▲

Price & Availability of 74LVT86

	To Download 74LVT86 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .