 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Data Sheet No. PD10048-F Series PVI5033R Photovoltaic Isolator Solid-State Opto-Isolated MOSFET Gate Driver Dual-Channel, 5V, 5A General Description The PVI5033R Photovoltaic Isolator is a dualchannel, opto-isolated driver capable of directly driving gates of power MOSFETs or IGBTs. It utilizes a monolithic integrated circuit photovoltaic generator of novel construction as its output. The output is controlled by radiation from a GaAlAs light emitting diode (LED) which is optically isolated from the photovoltaic generator. The PVI5033R is ideally suited for applications requiring high-current and/or high voltage switching with optical isolation between the low-level driving circuitry and high-energy or high- voltage load circuits. It can be used for directly driving gates of power MOSFETs. The dual- channel configuration allows its outputs to drive independent discrete power MOSFETs, or be connected in parallel or in series to provide higher-current drive for power MOSFETs or higher-voltage drive for IGBTs. PVI5033R employs a fast turn-off circuitry. PVI5033R Photovoltaic Isolators are packaged in an 8-pin, molded DIP package with either thru-hole or "gull-wing" terminals. It is available in standard plastic shipping tubes or on tape-and-reel. Refer to Part Identification information. Features ! ! ! ! ! ! Monolithic construction 3,750 VRMS I/O isolation 1,200 VDC output-to-output isolation Dual-Channel application flexibility Solid-State Reliability UL Recognized and BABT Certified Applications ! Telecommunications ! Load Distribution ! Industrial Controls ! Instrumentation and Measurement ! Electronic Ballast Part Identification PVI5033R PVI5033RS PVI5033RS-T thru-hole SMT SMT, Tape and Reel www.irf.com 1 PVI5033R Electrical Specifications (-40C TA +85C unless otherwise specified) INPUT CHARACTERISTICS Limits Min. Input Current (See Fig.1) Input Current Range (See Fig. 1) Max. Continuous Input Current @ TA=+25C LED Forward Voltage Drop @ 5mA, TA=+25C (See Fig. 3) Max. Reverse Voltage Max. Reverse Current @ -7VDC, TA=+25C 5.0 3.0 to 25 40 1.4 7.0 10 Units mA mA mA V V A OUTPUT CHARACTERISTICS Min. Forward Voltage Max. Reverse Current Limits 8.0 10 Units VDC ADC COUPLED CHARACTERISTICS Min. Output Voltage @ ILED = 10mA, RL = 10M @ TA=0C to +70C (See Fig. 1 & 2) Max. Output Voltage @ ILED = 10mA, RL = 10M @ TA=0C to +70C (See Fig. 1 & 2) Max. Voltage Differential Between Outputs @ ILED = 5mA, RL = 10M Min. Output Short-Circuit Current @ ILED = 5mA, @ TA=+25C (See Fig. 1 & 2) Typical Output Short-Circuit Current @ ILED = 10mA, @ TA=+25C (See Fig. 1 & 2) Max. Turn-On Time @ ILED = 5mA, CLOAD = 200pF (See Fig. 4) Max. Turn-Off Time @ ILED = 5mA, CLOAD = 200pF (See Fig. 4) Off-State Clamping Resistance: minimum maximum Limits 5 10 1.0 1.65 5 2.5 .5 350 1500 Units V V V A A ms ms GENERAL CHARACTERISTICS Min. Dielectric Strength, Input-Output Min. Dielectric Strength, Output-to-Output Min. Insulation Resistance, Input-to-Output @TA=+25C, 50%RH, 100VDC Max. Capacitance, Input-Output Max. Pin Soldering Temperature (10 seconds max.) Ambient Temperature Range: Operating Storage Limits 3750 1200 1012 5.0 +260 -40 to +85 -40 to +125 Units VRMS VDC pF C C C 8 (+) Connection Diagram International Rectifier does not recommend the use of this product in aerospace, avionics, military or life support applications. Users of this International Rectifier product in such applications assume all risks of such use and indemnify International Rectifier against all damages resulting from such use. 1 2 7 (-) 3 6 (+) 4 5 (-) 2 www.irf.com PVI5033R 10 30 Output Short-Circuit Current (A) 1.4 1.3 1.2 Open Circuit Voltage 9 8 27 24 ILED=5mA Output Voltage (V DC ) 7 6 5 4 3 2 1 0 0 5 10 RL=10M 21 18 15 12 9 6 Normalized Output 1.1 1.0 0.9 0.8 0.7 0.6 0.5 -40 -20 0 25 40 60 85 100 Output Voltage Short-Circuit Current Short Circuit Current 3 0 35 40 15 20 25 30 Input Current (mA) Ambient Temperature (deg. C) Figure 1. Typical Output Characteristics Figure 2. Typical Variation of Output 20 CAUTION: provide current limiting so that 25 mA maximum steadystate control current rating is not exceeded 7000 6000 16 ILED=5mA Response Time (s) limit it deg. C lim Input Current (mA) 5000 4000 3000 2000 1000 0 ce and +8 TYPICAL 12 5 deg. C Ton 8 Min. devi 4 Max. devic e and -40 Toff 0 200 400 600 800 1000 0 0 0.5 1.0 1.5 2.0 LED Forward Voltage Drop (Volts DC) Load Capacitance (pF) Figure 3. Input Characteristics (Current Controlled) Figure 4. Typical Response Time www.irf.com 3 PVI5033R Case Outlines 01-2030 01 01-2031 01 IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245 Tel: (310) 252-7105 Data and specifications subject to change without notice. 10/17/2003 4 www.irf.com |
Price & Availability of PVI5033R
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |