 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| QVE00039 PHOTOTRANSISTOR OPTICAL INTERRUPTER SWITCH PACKAGE DIMENSIONS 0.160 (4.06) RED ANODE BLACK CATHODE WHITE COLLECTOR DARK GREEN EMITTER 0.060 (1.52) (2X) 0.250 (6.35) 0.131 (3.32) 0.010 (0.25) W B R DG 0.230 0.375 (5.84) (9.52) 10.000.50 (25412.7) FULL RADIUS (2X) 0.445 (11.30) 0.170 (4.32) 0.060 (1.52) 0.050 (1.27) 0.095 (2.41) SCHEMATIC FEATURES * No contact switching * 2.41 mm wide slot BLACK WHITE 0.145 (3.68) 0.385 (9.78) * Slot horizontal to mounting surface RED DARK GREEN * Mounting tabs 0.060 (1.52) 0.150 (3.81) 0.245 (6.22) 0.070 (1.78) (2X) 45 (2X) FULL RADIUS (4X) * Transistor Output * Wire leads for remote connection 10" (254mm) * Opaque black plastic housing * 0.010 (0.25) aperture width 0.655 (16.64) NOTES (Applies to Max Ratings and Characteristics Tables.) NOTES: 1. Dimensions are in inches (mm) 2. Tolerance of .010 (.25) on all non nominal dimensions unless otherwise specified. 3. Wire gauge: 28 AWG 1. Derate power dissipation linearly 1.67 mW/C above 25C. 2. RMA flux is recommended. 3. Methanol or isopropyl alcohols are recommended as cleaning agents. 4. Soldering iron 1/16" (1.6mm) minimum from housing. ABSOLUTE MAXIMUM RATINGS Parameter Operating Temperature Storage Temperature Lead Soldering Temperature EMITTER Continuous Forward Current Reverse Voltage Power Dissipation(1) SENSOR Collector-Emitter Voltage Emitter-Collector Voltage Power Dissipation(1) (Iron)(2,3,4) (TA = 25C unless otherwise specified) Symbol TOPR TSTG TSOL-I IF VR PD VCEO VECO PD Rating -40 to +85 -40 to +85 240 for 5 sec 50 5 100 30 4.5 100 Units C C C mA V mW V V mW 1 of 4 100016C QVE00039 PHOTOTRANSISTOR OPTICAL INTERRUPTER SWITCH ELECTRICAL / OPTICAL CHARACTERISTICS PARAMETER TEST CONDITIONS (TA = 25C) SYMBOL MIN TYP MAX UNITS EMITTER Forward Voltage Reverse Current Peak Emission Wavelength SENSOR Collector-Emitter Breakdown Emitter-Collector Breakdown Dark Current COUPLED Collector Current Collector Emitter Saturation Voltage Rise Time Fall Time VCE = 5 V, RL = 100 " IC(ON) = 5 mA tr tf -- -- 8 50 -- -- IF = 20 mA, VCE = 10 V IF = 20 mA, IC = 0.4 mA IC(ON) VCE (SAT) 0.5 -- -- -- -- 0.4 mA V IC = 1 mA IE = 0.1 mA VCE = 10 V, IF = 0 mA BVCEO BVECO ID 30 5 -- -- -- -- -- -- 100 V V nA IF = 20 mA VR = 5 V IF = 20 mA VF IR !PE -- -- -- -- -- 940 1.7 100 -- V A nm s s TYPICAL PERFORMANCE CURVES Fig. 1 Forward Voltage vs. Ambient Temperature 3 IF Pulsed Pulse Width = 100 s Duty Cycle = 0.1% IF = 100 mA IF = 50 mA 100 TA = 25C Fig. 2 Forward Current Vs. Forward Voltage VF - FORWARD VOLTAGE (V) IF - FORWARD CURRENT (mA) 40 60 80 100 80 2 60 40 1 IF = 10 mA IF = 20 mA 20 0 -40 -20 0 20 0 1.0 1.1 1.2 1.3 1.4 1.5 1.6 TA - AMBIENT TEMPERATURE (C) VF - FORWARD VOLTAGE (V) Fig. 3 Collector Emitter Dark Current (Normalized) vs. Ambient Temperature 10 4 Fig. 4 Rise and Fall Time vs. Load Resistance 100 ICEO - NORMALIZED DARK CURRENT 10 3 Normalized to: VCE = 25 V TA = 25C VCE = 25 V RISE AND FALL TIME (s) VCE = 10 V 102 10 VCC= 5 V IC = 0.5 mA tpw= 100 us T = 10 ms TA = 25C tf tr tf tr 101 1 10 0 10-1 40 60 80 100 0.1 10 100 1000 TA - AMBIENT TEMPERATURE (C) RL - LOAD RESISTANCE (") 2 of 4 100016C QVE00039 PHOTOTRANSISTOR OPTICAL INTERRUPTER SWITCH Fig. 5 Normalized Collector Current vs. Forward Current IC(ON) - NORMALIZED COLLECTOR CURRENT 10 3 Fig. 6 Collector Current vs. Collector to Emitter Voltage IC(ON) - COLLECTOR CURRENT (mA) Normalized to: IF = 20 mA VCE = 5 V Pulse Width = 100 s TA = 25C 1 IF = 30 mA 2 IF = 20 mA 0.1 1 IF = 10 mA 0.01 1 10 100 1000 0 0.1 1 10 IF - FORWARD CURRENT (mA) VCE - COLLECTOR-EMITTER VOLTAGE (V) Fig. 7 Normalized Collector Current vs. Ambient Temperature IC(ON) -NORMALIZED COLLECTOR CURRENT IC(ON) -NORMALIZED COLLECTOR CURRENT 10 Normalized to: VCE = 5 V IF = 10 mA TA = 25C Fig. 8 Normalized Collector Current vs. Shield Distance 1.000 Black Shield Normalized to value with shield removed IF = 20 mA + E D + d 0 0.100 Black Shield d 0 0.010 1 IF = 10 mA IF = 5 mA 0 -40 -20 0 20 40 60 80 100 0.001 0 1 2 3 4 5 6 7 8 9 10 TA - AMBIENT TEMPERATURE (C) d - DISTANCE (mm) Fig. 9 Normalized Reverse Leakage Current vs. Ambient Temperature IR - NORMALIZED REVERSE LEAKAGE CURRENT 101 100 Normalized to: VCE = 5 V TA = 25C 10-1 0 20 40 60 80 100 TA - AMBIENT TEMPERATURE (C) 3 of 4 100016C QVE00039 PHOTOTRANSISTOR OPTICAL INTERRUPTER SWITCH DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com (c) 2000 Fairchild Semiconductor Corporation 4 of 4 100016C |
Price & Availability of QVE00039
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |