 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DC/DC Converter TES 2 Series Features Surface Mount DIL-Package 16 Standard Models Regulated Output Voltage I/O-isolation 1'000 VDC Very low Output Noise Indefinite Short-Circuit Protection High Accuracy of Pin Co-Planarity High Reliability, MTBF >800'000 h Reflow Soldering to CECC 00 802, Issue 2 2 Year Product Warranty 2 Watt The TES 2 converter series is intended for all applications where PCB's are assembled on an automated SMD production line.The small size DIL-package and the light weight allows easy handling by pick-and-place machines. They offer a 1000 VDC I/O-isolation and internal filters to reduce reflected input ripple current and to guarantee low output noise.This product series provides an economical solution for many cost critical applications in industrial and consumer electronics. Models Ordercode TES 2-0511 TES 2-0512 TES 2-0522 TES 2-0523 TES 2-1211 TES 2-1212 TES 2-1222 TES 2-1223 TES 2-2411 TES 2-2412 TES 2-2422 TES 2-2423 TES 2-4811 TES 2-4812 TES 2-4822 TES 2-4823 Input voltage Output voltage 5 12 12 15 5 12 12 15 5 12 12 15 5 12 12 15 VDC VDC VDC VDC VDC VDC VDC VDC VDC VDC VDC VDC VDC VDC VDC VDC Output current max. 400 165 85 65 400 165 85 65 400 165 85 65 400 165 85 65 mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA Efficiency typ. 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 % % % % % % % % % % % % % % % % 5 VDC 10% 12 VDC 10% 24 VDC 10% 48 VDC 10% www.tracopower.com Page 1 DC/DC Converter TES 2 Series 2 Watt Input Specifications Input current no load /full load 5 12 24 48 5 12 24 48 Vin Vin Vin Vin Vin Vin Vin Vin models models models models models models models models 80 35 17 10 7.5 15 30 55 mA mA mA mA VDC VDC VDC VDC / 665 mA typ. / 280 mA typ. / 140 mA typ. / 70 mA typ. max. max. max. max. Surge voltage (1 sec. max.) Reverse voltage protection Input Filter 500 mA max. Pi-Filter Output Specifications Voltage set accuracy Regulation - Input variation Vin min. to Vin max. - Load variation 10 - 100 % - single output models - dual output models balanced load 3% 0.3 % max. 0.5 % max. 3 % max. 50 mVpk-pk max. 0.02 % / C >120 % of Iout max., constant current indefinite (automatic recovery) 470 F max. 220 F max. Ripple and noise (20 MHz Bandwidth) Temperature coefficient Output current limitation Short circuit protection Capacitive load - single output models - dual output models General Specifications Temperature ranges - Operating - Case temperature - Storage - 40 C ... + 60 C (no derating) + 95 C max. - 40 C ... + 125 C 2.9% / C above 60 C 95 % rel H max. >800'000h @ + 25 C 1'000VDC 100 pF typ. > 1`000 M Ohm 80 KHz typ. (depending on load) Derating Humidity (non condensing) Reliability, calculated MTBF (MIL-HDBK-217 E) Isolation voltage Isolation capacity Isolation resistance Switching frequency Input/Output Input/Output Input/Output (500 VDC) All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. www.tracopower.com Page 2 DC/DC Converter TES 2 Series 2 Watt Physical Specifications Case material Weight Reflow soldering profile non conductive black plastic 10 g (0.35 oz) Peak temp. 230C (10 sec max.) 185C for 90 sec max. Convection reflow solder process is recommended Outline Dimensions mm (inches) 27.2 (1.07) S Seating Plane Detail A 10.2 (0.402) (0.02) 0.5 14.8 (0.58) 20 11 16.1 (0.63) 18.8 (0.74) Top View 1 2.2 (0.09) 10 1.0 (0.04) Pin-Out Pin 1 2 8 9 10 11 12 13 Single -Vin (GND) -Vin (GND) No function No function No function +Vout No function -Vout +Vin (Vcc) +Vin (Vcc) Dual -Vin (GND) -Vin (GND) Common No function -Vout +Vout No function Common +Vin (Vcc) +Vin (Vcc) 15.24 (0.6) 2.54 (0.1) 1. 0 ( 0 0. 4) 0.15 19 20 (0.051) All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. www.tracopower.com Page 3 (0.006) 0.15 1.3 DC/DC Converter TES 2 Series 2 Watt Solder Pad Dimensions mm (inches) 22.86 (0.9) 2.2 2.54 (0.1) 15.24 (0.6) 2.54 2.54 (0.1) (0.1) (0.09) 20.0 (0.787) 1.6 min. (0.06 min.) Specifications can be changed without notice Rev. 10/01 Jenatschstrasse 1 * CH-8002 Zurich * Switzerland Tel. +41-1284 2911 * Fax +41-1201 1168 * e-mail: sales@traco.ch * internet: http://www.tracopower.com (0.11) 2.8 Page 4 |
Price & Availability of TES2-0511
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |