 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MICROWAVE CORPORATION v00.0404 HMC480ST89 InGaP HBT GAIN BLOCK MMIC AMPLIFIER, DC - 5.0 GHz Features P1dB Output Power: +19 dBm to 2.5 GHz Gain: 19 dB @ 1 GHz 16 dB @ 2 GHz +34 dBm Output IP3 Single Supply: +6V to +8V Industry Standard SOT89 Package 8 AMPLIFIERS - SMT Typical Applications The HMC480ST89 is an ideal RF/IF gain block & LO or PA driver for: * Cellular / PCS / 3G * Fixed Wireless & WLAN * CATV, Cable Modem & DBS * Microwave Radio & Test Equipment Functional Diagram General Description The HMC480ST89 is an InGaP HBT Gain Block MMIC SMT amplifier covering DC to 5 GHz and packaged in an industry standard SOT89. The amplifier can be used as a cascadable 50 Ohm RF/IF gain stage as well as a LO or PA driver with up to +20 dBm P1dB output power for cellular/3G, FWA, CATV, microwave radio and test equipment applications. The HMC480ST89 offers 19 dB of gain with a +34 dBm output IP3 at 1 GHz while requiring only 82 mA from a single positive supply. The HMC480ST89 InGaP gain block offers excellent output IP3 and flat +19 to +20dBm output power performance through 5 GHz compared to equivalent SiGe based products. Electrical Specifications, Vs= 8.0 V, Rbias= 39 Ohm, TA = +25 C Parameter DC - 1.0 GHz 1.0 - 2.0 GHz 2.0 - 3.0 GHz 3.0 - 4.0 GHz 4.0 - 5.0 GHz DC - 5.0 GHz DC - 1.0 GHz 1.0 - 5.0 GHz DC - 1.0 GHz 1.0 - 5.0 GHz DC - 5.0 GHz 0.5 - 1.0 GHz 1.0 - 2.0 GHz 2.0 - 3.5 GHz 3.5 - 5.0 GHz 0.5 - 1.0 GHz 1.0 - 2.0 GHz 2.0 - 3.5 GHz 3.5 - 5.0 GHz DC - 4.0 GHz 4.0 - 5.0 GHz Min. 17 14 12 10 8 Typ. 19 17 15 13 11 0.008 17 10 17 10 20 20 18.5 17.5 16 34 33 32 30 3.25 4.0 82 Max. Units dB dB dB dB dB dB/ C dB dB dB dB dB dBm dBm dBm dBm dBm dBm dBm dBm dB dB mA Gain Gain Variation Over Temperature Input Return Loss Output Return Loss Reverse Isolation Output Power for 1 dB Compression (P1dB) 0.016 16 15.5 14.5 13 Output Third Order Intercept (IP3) (Pout= 0 dBm per tone, 1 MHz spacing) Noise Figure Supply Current (Icq) Note: Data taken with broadband bias tee on device output. 8 - 340 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com MICROWAVE CORPORATION v00.0404 HMC480ST89 InGaP HBT GAIN BLOCK MMIC AMPLIFIER, DC - 5.0 GHz Broadband Gain & Return Loss 25 20 15 RESPONSE (dB) 10 0 -5 -10 -15 -20 -25 -30 0 1 2 3 4 5 6 7 8 FREQUENCY (GHz) 5 Gain vs. Temperature 22 20 18 16 GAIN (dB) 14 12 10 8 6 4 2 0 0 1 2 3 4 5 6 FREQUENCY (GHz) +25 C +85 C -40 C 8 AMPLIFIERS - SMT 8 - 341 S21 S11 S22 Input Return Loss vs. Temperature 0 INPUT RETURN LOSS (dB) +25 C +85 C -40 C Output Return Loss vs. Temperature 0 OUTPUT RETURN LOSS (dB) +25 C +85 C -40 C -5 -5 -10 -10 -15 -15 -20 -20 -25 0 1 2 3 4 5 6 FREQUENCY (GHz) -25 0 1 2 3 4 5 6 FREQUENCY (GHz) Reverse Isolation vs. Temperature 0 +25 C Noise Figure vs. Temperature 10 9 8 NOISE FIGURE (dB) 7 6 5 4 3 2 1 +25 C +85 C -40 C REVERSE ISOLATION (dB) -5 +85 C -40 C -10 -15 -20 -25 0 1 2 3 4 5 6 FREQUENCY (GHz) 0 0 1 2 3 4 5 FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com v00.0404 MICROWAVE CORPORATION HMC480ST89 InGaP HBT GAIN BLOCK MMIC AMPLIFIER, DC - 5.0 GHz 8 AMPLIFIERS - SMT P1dB vs. Temperature 24 22 20 18 P1dB (dBm) 16 14 12 10 8 6 4 0 1 2 3 4 5 FREQUENCY (GHz) +25 C +85 C -40 C Psat vs. Temperature 24 22 20 18 Psat (dBm) 16 14 12 10 8 6 4 0 1 2 3 4 5 FREQUENCY (GHz) +25 C +85 C -40 C Output IP3 vs. Temperature 40 38 36 34 OIP3 (dBm) 32 30 28 26 24 22 20 0 1 2 3 4 5 FREQUENCY (GHz) +25 C +85 C -40 C Gain, Power & OIP3 vs. Supply Voltage @ 850 MHz, Rbias= 39 Ohms GAIN (dB), P1dB (dBm), Psat (dBm), OIP3 (dBm) 36 32 28 24 20 16 12 8 4 0 7.6 Gain P1dB Psat OIP3 8 Vs (Vdc) 8.4 Vcc vs. Icc Over Temperature for Fixed Vs= 8V, RBIAS= 39 Ohms 90 88 86 84 Icc (mA) 82 80 78 76 74 72 70 4.6 4.7 4.8 Vcc (Vdc) 4.9 5 -40 C +25 C +85 C 8 - 342 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com v00.0404 MICROWAVE CORPORATION HMC480ST89 InGaP HBT GAIN BLOCK MMIC AMPLIFIER, DC - 5.0 GHz Absolute Maximum Ratings Collector Bias Voltage (Vcc) RF Input Power (RFin)(Vcc = +5 Vdc) Junction Temperature Continuous Pdiss (T = 85 C) (derate 8.25 mW/C above 85 C) Thermal Resistance (junction to ground paddle) Storage Temperature Operating Temperature +6.0 Vdc +15 dBm 8 AMPLIFIERS - SMT NOTES: 1. PACKAGE BODY MATERIAL: MOLDING COMPOUND MP-108S OR EQUIVALENT 2. LEAD MATERIAL: Cu w/ Ag SPOT PLATING 3. LEAD PLATING: 80Sn/20Pb 4. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 5. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 6. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 7. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. 150 C 0.536 W 122 C/W -65 to +150 C -40 to +85 C Outline Drawing For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 8 - 343 v00.0404 MICROWAVE CORPORATION HMC480ST89 InGaP HBT GAIN BLOCK MMIC AMPLIFIER, DC - 5.0 GHz 8 AMPLIFIERS - SMT Pin Descriptions Pin Number Function Description Interface Schematic 1 RFIN This pin is DC coupled. An off chip DC blocking capacitor is required. 3 RFOUT RF output and DC Bias (Vcc) for the output stage. 2, 4 GND These pins and package bottom must be connected to RF/DC ground. Application Circuit Note: 1. External blocking capacitors are required on RFIN and RFOUT. 2. RBIAS provides DC bias stability over temperature. Recommended Bias Resistor Values for Icc= 82 mA, Rbias= (Vs - Vcc) / Icc Supply Voltage (Vs) RBIAS VALUE RBIAS POWER RATING 6V 12 1/8 W 8V 39 1/4 W Recommended Component Values for Key Application Frequencies Frequency (MHz) Component 50 L1 C1, C2 270 nH 0.01 F 900 56 nH 100 pF 1900 18 nH 100 pF 2200 18 nH 100 pF 2400 15 nH 100 pF 3500 8.2 nH 100 pF 5000 6.8 nH 100 pF 8 - 344 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com v00.0404 MICROWAVE CORPORATION HMC480ST89 InGaP HBT GAIN BLOCK MMIC AMPLIFIER, DC - 5.0 GHz Evaluation PCB 8 AMPLIFIERS - SMT List of Materials for Evaluation PCB 108371* Item J1 - J2 J3 - J4 C1, C2 C3 C4 C5 R1 L1 U1 PCB** Description PC Mount SMA Connector DC Pin Capacitor, 0402 Pkg. 100 pF Capacitor, 0402 Pkg. 1000 pF Capacitor, 0603 Pkg. 2.2 F Capacitor, Tantalum Resistor, 1210 Pkg. Inductor, 0603 Pkg. HMC480ST89 108370 Evaluation PCB The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and package bottom should be connected directly to the ground plane similar to that shown. A sufficient number of VIA holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. ** Circuit Board Material: Rogers 4350 * Reference this number when ordering complete evaluation PCB. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 8 - 345 |
Price & Availability of HMC480ST89
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |