 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PRELIMINARY Datasheet (Version 2.2) NWT190 CDMA TX Full Band BAW-filter for US PCS Features * * * * * * * * * Low-loss and high-selectivity Bulk-Acoustic-Wave Filter Passband: CDMA Tx 1850 .. 1910 MHz High selectivity and low temperature drift (TCF = -18 ppm/K) Leadless Plastic Package for Surface Mounted Technology (SMT) Thin Small Leadless Package (TSLP) Small Package dimensions of 2.0 x 1.6mm Package height 0.6 mm "Green" package, suitable for 260C reflow temperature Excellent ESD robustness, pyroelectric charge generation does not occur P-TSLP-4-5 Type NWT190 Marking T190 Ordering Code available on request Package TSLP-4-5 Description: NWT190 is a full-band PCS Tx Filter for US-CDMA and US W-CDMA that utilizes Bulk-Acoustic-Wave Filter technology. In typical cellular phone architectures, the transmit filter fits between the driver amplifier and the power amplifier. Benefits of this new transmit filter are reduced insertion loss, very low temperature drift and increased steepness of the filter skirts in lower and upper transition bands. NWT190 is packaged in a low profile plastic package. Datasheet_NWT190_Vers2'2.doc 1 26.Nov.2003 NWT190 Pin Configuration (bottom view) OUT 3 GND 4 2 1 GND IN Pin Definitions and Functions Pin No. 1 2 3 4 Symbol IN GND OUT GND Function unbalanced TX input ground unbalanced TX output ground Absolute Maximum Ratings Operating temperature range Storage temperature range ESD (Machine Model) ESD (Human Body Model) Power handling capability (10kh) -30 .. +85 -65 .. +150 100 1 20 Unit C C V kV dBm Datasheet_NWT190_Vers2'2.doc 2 26.Nov.2003 NWT190 Electrical specifications All parameters are valid over full operating temperature range unless otherwise stated. Parameters are tested at room temperature, variations over temperature are considered by temperature margins. Passband Parameter Frequency Insertion loss (+25C) (-30 .. +85C) (1855 to 1905 MHz) Min. 1850.6 Typ. Max. 1909.4 Unit MHz dB dB unbal. unbal. dB 2.3 2.8 1.8 1.5 50 50 9.5 11 3.5 2.0 Total ripple over frequency Input impedance Output impedance Return loss Input/Output DC bias RF performance must not change 5 V Stopband Parameter attenuation 0.3 to 1570 MHz Min. 24 30 24 25 38 35 30 15 23 15 Typ. Max. Unit dB dB dB attenuation 1570 to 1580 MHz attenuation 1580 to 1770 MHz attenuation 1770 to 1830 MHz attenuation 1930.6 to 1990 MHz (-10 ... +85C) (-30 ... -10C) attenuation 1990 to 2500 MHz attenuation 2500 to 3700 MHz attenuation 3700 to 3820 MHz attenuation 3820 to 6000 MHz 30 44 dB dB dB 25 27 dB dB dB Datasheet_NWT190_Vers2'2.doc 3 26.Nov.2003 NWT190 Insertion Loss (Passband) 0 -1 Insertion Loss / dB -2 -3 -4 -5 1820 1830 1840 1850 1860 1870 1880 1890 1900 1910 1920 1930 1940 Frequency / MHz Return Loss (Passband) 0 -5 Return Loss / dB -10 -15 -20 Input -25 Output -30 1820 1830 1840 1850 1860 1870 1880 1890 1900 1910 1920 1930 1940 Frequency / MHz Datasheet_NWT190_Vers2'2.doc 4 26.Nov.2003 NWT190 Insertion Loss (Narrowband) 0 -10 Insertion Loss / dB -20 -30 -40 -50 -60 -70 1500 1600 1700 1800 1900 2000 2100 2200 2300 Frequency / MHz Insertion Loss (Wideband) 0 -10 Insertion Loss / dB -20 -30 -40 -50 -60 -70 0 1000 2000 3000 4000 5000 6000 Frequency / MHz Datasheet_NWT190_Vers2'2.doc 5 26.Nov.2003 NWT190 Package Dimensions Top View Side View Bottom View Recommended Landing Pad Pin 1 Marking / Labeling S (NOTE OF MANUFACTURER) TYPE (T190) DATECODE PIN 1 MARKING (LASERED) Datasheet_NWT190_Vers2'2.doc 6 26.Nov.2003 NWT190 Published by Infineon D-81541 Munchen. Technologies AG, Marketing-Kommunikation, Balanstrae 73, copyright Infineon Technologies AG 2003. All Rights Reserved. As far as patents or other rights of third parties are concerned, liability is only assumed for components per se, not for applications, processes and cirucits implemented within components or assemblies. The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. For questions on technology, delivery, and prices please contact the Offices of Semiconductor Group in Germany or the Infineon Technologies Companies and Representatives worldwide (see address list). Due to technical requirements components may contain dangerous substances. For information on the type in question please contact your nearest Infineon Technologies Office. Infineon Technologies AG is an approved CECC manufacturer. Datasheet_NWT190_Vers2'2.doc 7 26.Nov.2003 |
Price & Availability of NWT190
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |