View MAX4651_98608.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

19-1661; Rev 2; 2/02
Low-Voltage, 4, Quad, SPST, CMOS Analog Switches
General Description
The MAX4651/MAX4652/MAX4653 quad analog switches feature 4 max on-resistance (RON) when operating from a single +5V supply. RON is matched between switches to 0.2 (max) and is flat (0.8 max) over the specified signal range. Each switch can handle Rail-toRail(R) analog signals. Off-leakage current is 0.1nA at +25C. These switches are ideal in low-distortion applications and are the preferred solution over mechanical relays in automated test equipment or applications where current switching is required. They have low power requirements, require less board space, and are more reliable than mechanical relays. The MAX4651/MAX4652/MAX4653 operate from a single +1.8V to +5.5V supply, making them ideal for use in battery-powered applications. The MAX4651 has four normally closed (NC) switches, the MAX4652 has four normally open (NO) switches, and the MAX4653 has two NO and two NC switches. These devices are available in 16-pin QFN, TSSOP and SO packages, as well as 20-pin QFN package. o On-Resistance 4 max at 5V 7 max at 3V o On-Resistance Flatness 0.8 max at 5V 2.5 max at 3V o On-Resistance Matching 0.2 max (+2.7V to +5.5V) o +1.8V to +5.5V Single-Supply Voltage o +1.8V Operation On-Resistance 30 (typ) Over Temperature tON 20ns typ, tOFF 12ns (typ) o TTL/CMOS-Logic Compatible o Crosstalk -100dB at 1MHz o Off-Isolation -75dB at 1MHz o Rail-to-Rail Signal Range
Features
MAX4651/MAX4652/MAX4653
Applications
Battery-Powered Systems Audio and Video Signal Routing Low-Voltage Data-Acquisition Systems Sample-and-Hold Circuits Communications Circuits Relay Replacement
Rail-to-Rail is a registered trademark of Nippon Motorola, Ltd.
PART MAX4651EGE MAX4651EUE MAX4651ESE MAX4651EGP
Ordering Information
TEMP RANGE -40C to +85C -40C to +85C -40C to +85C -40C to +85C PIN-PACKAGE 16 QFN (4 4) 16 TSSOP 16 SO 20 QFN (4 4)
Ordering Information continued at end of data sheet.
Pin Configurations/Functional Diagrams/Truth Tables
TOP VIEW
IN1 COM1 NC1 N.C. GND NC4 COM4 IN4 1 2 3 4 5 6 7 8 16 15 14 13 IN2 COM2 NC2 V+ N.C. NC3 COM3 IN3 IN1 COM1 NO1 N.C. GND NO4 COM4 IN4 1 2 3 4 5 6 7 8 16 15 14 13 IN2 COM2 NO2 V+ N.C. NO3 COM3 IN3 IN1 COM1 NO1 N.C. GND NO4 COM4 IN4 1 2 3 4 5 6 7 8 16 15 14 13 IN2 COM2 NC2 V+ N.C. NC3 COM3 IN3
MAX4651
12 11 10 9
MAX4652
12 11 10 9
MAX4653
12 11 10 9
TSSOP/SO
MAX4651 LOGIC SWITCH 0 1 ON OFF
TSSOP/SO
MAX4652 LOGIC SWITCH 0 1 OFF ON LOGIC 0 1
TSSOP/SO
MAX4653 SWITCHES 1, 4 OFF ON SWITCHES 2, 3 ON OFF
SWITCHES SHOWN FOR LOGIC "0" INPUT
Pin Configurations continued at end of data sheet. ________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at 1-888-629-4642, or visit Maxim's website at www.maxim-ic.com.
Low-Voltage, 4, Quad, SPST, CMOS Analog Switches MAX4651/MAX4652/MAX4653
ABSOLUTE MAXIMUM RATINGS
V+ to GND ..................................................................-0.3 to +6V IN_, COM_, NO_, NC_ to GND (Note 1).......-0.3V to (V+ + 0.3V) Continuous Current (NO_, NC_, COM_)...........................50mA Peak Current (NO_, NC_, COM_, pulsed at 1ms 10% duty cycle)...........................................................100mA Continuous Power Dissipation (TA = +70C) 16-Pin QFN (derate 18.5mW/C above +70C) .........1481mW 16-Pin TSSOP (derate 5.7mW/C above +70C) .........457mW 16-Pin SO (derate 8mW/C above +70C)...................640mW 20-Pin QFN (derate 20mW/C above +70C) ............1600mW Operating Temperature Range ...........................-40C to +85C Storage Temperature Range .............................-65C to +150C Lead Temperature (soldering, 10s) .................................+300C
Note 1: Signals on NO_, NC_, COM_, or IN_ exceeding V+ or GND are clamped by internal diodes. Limit forward current to maximum current rating.
Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS--Single +5V Supply
(V+ = 4.5V to 5.5V, VIH = 2.4V, VIL = 0.8V, TA = TMIN to TMAX, unless otherwise specified. Typical values are at V+ = 5V, TA = +25C.) (Note 2) PARAMETER ANALOG SWITCH Input Voltage Range VCOM_, VNO_, VNC_ RON ICOM = 10mA, VNO_ or VNC_ = 0 to V+, V+ = 4.5V ICOM = 10mA, VNO_ or VNC_ = 0 to V+, V+ = 4.5V TA = +25C TA = TMIN to TMAX TA = +25C TA = TMIN to TMAX TA = +25C TA = TMIN to TMAX TA = +25C TA = TMIN to TMAX TA = +25C TA = TMIN to TMAX TA = +25C TA = TMIN to TMAX -0.1 -0.2 -0.1 -0.2 -0.1 -0.2 0.01 0.01 0.01 0.5 0.05 0 2.5 V+ 4 4.5 0.2 0.3 0.8 1 0.1 nA 0.2 0.1 nA 0.2 0.1 nA 0.2 V SYMBOL CONDITIONS MIN TYP MAX UNITS
COM_ to NO_ or NC_ On-Resistance COM_ to NO_ or NC_ On-Resistance Match Between Channels (Notes 3, 8) On-Resistance Flatness (Note 4) Off-Leakage Current (NO_ or NC_) (Note 5) COM_ Off-Leakage Current (Note 5)
RON
ICOM = 10mA, RFLAT(ON) VNO_ or VNC_ = 0 to V+, V+ = 4.5V INO_, INC_ VCOM = 1V, 4.5V; VNO_ or VNC_ = 4.5V, 1V; V+ = 5.5V
VCOM = 1V, 4.5V; ICOM_(OFF) VNO_ or VNC_ = 4.5V, 1V; V+ = 5.5V V+ = 5.5V, VCOM = 1V, 4.5V; VNO_ or VNC_ = 1V, 4.5V or floating
COM_ On-Leakage Current (Note 5) LOGIC INPUT (IN_) Input High Input Low Logic Input Current
ICOM_(ON)
VIH VIL IIN
2.4 0.8 -100 5 100
V V nA
2
_______________________________________________________________________________________
Low-Voltage, 4, Quad, SPST, CMOS Analog Switches
ELECTRICAL CHARACTERISTICS--Single +5V Supply (continued)
(V+ = 4.5V to 5.5V, VIH = 2.4V, VIL = 0.8V, TA = TMIN to TMAX, unless otherwise specified. Typical values are at V+ = 5V, TA = +25C.) (Note 2) PARAMETER SYMBOL CONDITIONS VNO_ = VNC_ = 3V, TA = +25C RL = 300, CL = 35pF, TA = TMIN to TMAX Figure 2 VNO_ = VNC_ = 3V, TA = +25C RL = 300, CL = 35pF, TA = TMIN to TMAX Figure 2 VNO_ = VNC_ = 3V, RL = 300, CL = 35pF Q COFF TA = +25C TA = TMIN to TMAX 1 1 2 16 16 32 -50 dB -75 -80 dB -100 0.02 0.001 1.0 % A pC pF pF pF MIN TYP 11 MAX 14 ns 16 6 8 ns 10 6 ns UNITS SWITCH DYNAMIC CHARACTERISTICS Turn-On Time (Note 5) tON
MAX4651/MAX4652/MAX4653
Turn-Off Time (Note 5)
tOFF
Break-Before-Make (MAX4653 only) (Note 5) Charge Injection NO_ or NC_ Off-Capacitance COM_ Off-Capacitance COM_ On-Capacitance
VGEN = 2V, CL = 1.0nF, RGEN = 0, Figure 3 VNO_ = VNC_ = GND, f = 1MHz, Figure 6 VCOM_ = VNO_, VNC_ = GND, f = 1MHz, Figure 7 RL = 50, CL = 5pF, f = 10MHz, Figure 4 RL = 50, CL = 5pF, f = 1MHz, Figure 4 RL = 50, CL = 5pF, f = 10MHz, Figure 5 RL = 50, CL = 5pF, f = 1MHz, Figure 5 RL = 600, f = 20Hz to 20kHz V+ = 5.5V, VIN = 0 or V+
CCOM(OFF) VCOM_ = GND, f = 1MHz, Figure 6 CCOM(ON)
Off-Isolation (Note 6)
VISO
Crosstalk (Note 7) Total Harmonic Distortion POWER SUPPLY Positive Supply Current
VCT THD I+
ELECTRICAL CHARACTERISTICS--Single +3V Supply
(V+ = 2.7V to 3.3V, VIH = 2.0V, VIL = 0.4V, TA = TMIN to TMAX, unless otherwise specified. Typical values are at V+ = 3V, TA = +25C.) (Note 2) PARAMETER ANALOG SWITCH Input Voltage Range VCOM_, VNO_, VNC_ RON V+ = 2.7V, ICOM = 10mA, VNO_ or VNC_ = 0 to V+ V+ = 2.7V, ICOM = 10mA, VNO_ or VNC_ = 0 to V+ V+ = 2.7V, ICOM = 10mA, VNO_ or VNC_ = 0 to V+ TA = +25C TA = TMIN to TMAX TA = +25C TA = TMIN to TMAX TA = +25C TA = TMIN to TMAX 1.2 0.1 0 5 V+ 7 8 0.2 0.3 2.5 3 V SYMBOL CONDITIONS MIN TYP MAX UNITS
COM_ to NO_ or NC_ On-Resistance COM_ to NO_ or NC_ On-Resistance Match Between Channels (Notes 3, 8) On-Resistance Flatness (Note 4)
RON
RFLAT(ON)
_______________________________________________________________________________________
3
Low-Voltage, 4, Quad, SPST, CMOS Analog Switches MAX4651/MAX4652/MAX4653
ELECTRICAL CHARACTERISTICS--Single +3V Supply (continued)
(V+ = 2.7V to 3.3V, VIH = 2.0V, VIL = 0.4V, TA = TMIN to TMAX, unless otherwise specified. Typical values are at V+ = 3V, TA = +25C.) (Note 2) PARAMETER LOGIC INPUT (IN_) Input High Input Low Logic Input Current VIH VIL IIN VNO_ = VNC_ = 2V, TA = +25C RL = 300, CL = 35pF, TA = TMIN to TMAX Figure 2 VNO_ = VNC_ = 2V, TA = +25C RL = 300, CL = 35pF, TA = TMIN to TMAX Figure 2 VNO_ = VNC_ = 2V, RL = 300, CL = 35pF Q COFF TA = +25C TA = TMIN to TMAX 1 1 2 16 16 32 -50 dB -75 -80 dB -100 0.02 0.001 1.0 % A pC pF pF pF -100 5 13 2.0 0.4 100 16 ns 20 7 10 ns 12 7 ns V V nA SYMBOL CONDITIONS MIN TYP MAX UNITS
SWITCH DYNAMIC CHARACTERISTICS Turn-On Time (Note 5) tON
Turn-Off Time (Note 5)
tOFF
Break-Before-Make (MAX4653 only) (Note 5) Charge Injection NO_ or NC_ Off-Capacitance COM_ Off-Capacitance COM_ On-Capacitance
VGEN = 1.5V, CL = 1.0nF, RGEN = 0, Figure 3 VNO_ = VNC_ = GND, f = 1MHz, Figure 6 VCOM_ = VNO_, VNC_ = GND, f = 1MHz, Figure 7 RL = 50, CL = 5pF, f = 10MHz, Figure 4 RL = 50, CL = 5pF, f = 1MHz, Figure 4 RL = 50, CL = 5pF, f = 10MHz, Figure 5 RL = 50, CL = 5pF, f = 1MHz, Figure 5 RL = 600, f = 20Hz to 20kHz V+ = 3.3V, VIN = 0 or V+
CCOM(OFF) VCOM_ = GND, f = 1MHz, Figure 6 CCOM(ON)
Off-Isolation (Note 6)
VISO
Crosstalk (Note 7) Total Harmonic Distortion POWER SUPPLY Positive Supply Current
VCT THD I+
Note 2: The algebraic convention, where the most negative value is a minimum and the most positive value is a maximum, is used in this data sheet. Note 3: RON = RON(MAX) - RON(MIN). Note 4: Flatness is defined as the difference between the maximum and the minimum value of on-resistance as measured over the specified analog signal ranges. Note 5: Guaranteed by design. Note 6: Off-Isolation = 20log10(VCOM / VNO), where VCOM = output and VNO = input to off switch. Note 7: Between any two switches. Note 8: RON matching specifications for QFN-packages parts are guaranteed by design.
4
_______________________________________________________________________________________
Low-Voltage, 4, Quad, SPST, CMOS Analog Switches
Typical Operating Characteristics
(V+ = 5V, TA = +25C, unless otherwise noted.)
ON-RESISTANCE vs. VCOM AND SUPPLY VOLTAGE
MAX4651/2/3-01
MAX4651/MAX4652/MAX4653
ON-RESISTANCE vs. VCOM AND TEMPERATURE
MAX4651/2/3-02
ON-/OFF-LEAKAGE CURRENT vs. TEMPERATURE
V+ = 5.5V ON-LEAKAGE
MAX4651/2/3-03
14 12 10 V+ = 2.5V V+ = 1.8V
3.5 3.0 2.5 2.0 1.5 TA = +25C 1.0 0.5 0 TA = -40C TA = +85C
1
0.1 LEAKAGE (nA)
RON ()
8 6 4 2 0 0 1 2 3 4 5 VCOM (V) V+ = 3.3V V+ = 5V
RON ()
0.01 OFF-LEAKAGE 0.001
0.0001 0 1 2 3 4 5 -40 -20 0 20 40 60 80 VCOM (V) TEMPERATURE (C)
SUPPLY CURRENT vs. SUPPLY VOLTAGE AND TEMPERATURE
MAX4651/2/3-04
TURN-ON/TURN-OFF TIMES vs. TEMPERATURE
9 8 7 tON/tOFF (ns) 6 5 4 3 tOFF tON/tOFF (ns) 15 tON
MAX4651/2/3-05
TURN-ON/TURN-OFF TIMES vs. SUPPLY VOLTAGE
MAX4651/2/3-06
80 70 SUPPLY CURRENT (nA) 60 50 40 30 20 10 0 -10 0 1 2 3 4 5 SUPPLY VOLTAGE (V) TA = +25C TA = -40C TA = +85C
10
25
20
tON 10 tOFF
2 1 0 -40 -20 0 20 40 60 80 TEMPERATURE (C) VCOM = 3V
5
0 0 1 2 3 4 5 SUPPLY VOLTAGE (V)
TURN-ON/TURN-OFF TIMES vs. VCOM
MAX4651/2/3-07
TURN-ON/TURN-OFF TIMES vs. VCOM
MAX4651/2/3-08
CHARGE INJECTION vs. VCOM
1.4 1.2 1.0 Q (pC) V+ = 3V 0.8 0.6 0.4 0.2 V+ = 5V
MAX4651/2/3-09
12 10 8 tON/tOFF (ns) tON
14 12 10 tON/tOFF (ns) 8 6 4 2 tOFF tON
1.6
6 4 tOFF 2 0 1.0 V+ = 5V
0 1.5 2.0 2.5 3.0 VCOM (V) 3.5 4.0 4.5 5.0
V+ = 3V 1.0 1.5 2.0 VCOM (V) 2.5 3.0
0 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 VCOM (V)
_______________________________________________________________________________________
5
Low-Voltage, 4, Quad, SPST, CMOS Analog Switches MAX4651/MAX4652/MAX4653
Typical Operating Characteristics (continued)
(V+ = 5V, TA = +25C, unless otherwise noted.)
TOTAL HARMONIC DISTORTION vs. FREQUENCY
MAX4651/2/3-10
MAX4651/2/3-11
FREQUENCY RESPONSE
0 -10 -20 -30 LOSS (dB) -40 -50 -60 -70 -80 -90 -100 0.1 1 10 FREQUENCY (MHz) 100 1000 V+ = 5V 50 IN AND OUT 0 0.01 0.005 OFF-LOSS THD (%) 0.015 ON-LOSS 0.025
0.020
0.010
25 IN AND OUT SIGNAL = 5Vp-p 0.1 1 10 100 1000
FREQUENCY (kHz)
6 ________________________________________________________________________________________
Low-Voltage, 4, Quad, SPST, CMOS Analog Switches
Pin Description
PIN MAX4651 MAX4652 MAX4653 TSSOP/ 16-PIN 20-PIN TSSOP/ 16-PIN 20-PIN TSSOP/ 16-PIN 20-PIN SO QFN QFN SO QFN QFN SO QFN QFN 1 15 19 1 15 19 1 15 19 2 16 1 2 16 1 2 16 1 3 -- 4, 12 5 6 -- 7 8 9 10 11 -- 13 14 -- 15 16 1 -- 2, 10 3 4 -- 5 6 7 8 9 -- 11 12 -- 13 14 2 -- 6, 8, 10, 16, 18, 20 3 4 -- 5 7 9 11 12 -- 13 14 -- 15 17 -- 3 4, 12 5 -- 6 7 8 9 10 -- 11 13 -- 14 15 16 -- 1 2, 10 3 -- 4 5 6 7 8 -- 9 11 -- 12 13 14 -- 2 6, 8, 10, 16, 18, 20 3 -- 4 5 7 9 11 -- 12 13 -- 14 15 17 -- 3 4, 12 5 -- 6 7 8 9 10 11 -- 13 14 -- 15 16 -- 1 2, 10 3 -- 4 5 6 7 8 9 -- 11 12 -- 13 14 -- 2 6, 8, 10, 16, 18, 20 3 -- 4 5 7 9 11 12 -- 13 14 -- 15 17
MAX4651/MAX4652/MAX4653
NAME
FUNCTION
IN1 Digital Control Input 1 COM1 Analog Switch 1 Common Terminal Analog Switch 1 Normally Closed NC1 Terminal Analog Switch 1 Normally Open NO1 Terminal N.C. GND No Connection. Not internally connected.
Ground Analog Switch 4 Normally Closed NC4 Terminal Analog Switch 4 Normally Open NO4 Terminal COM4 Analog Switch 4 Common Terminal IN4 Digital Control Input 4 IN3 Digital Control Input 3 COM3 Analog Switch 3 Common Terminal Analog Switch 3 Normally Closed NC3 Terminal Analog Switch 3 Normally Open NO3 Terminal V+ Positive-Supply Voltage Input Analog Switch 2 Normally Closed NC2 Terminal Analog Switch 2 Normally Open NO2 Terminal COM2 Analog Switch 2 Common Terminal IN2 Digital Control Input 2
_______________________________________________________________________________________
7
Low-Voltage, 4, Quad, SPST, CMOS Analog Switches MAX4651/MAX4652/MAX4653
Detailed Description
The MAX4651/MAX4652/MAX4653 are low on-resistance, low-voltage analog switches that operate from a single +1.8V to +5.5V supply. CMOS switch construction allows processing analog signals that are within the supply voltage range (GND to V+).
V+ D1 V+
MAX4651 MAX4652 MAX4653
Applications Information
Proper power-supply sequencing is recommended for all CMOS devices. Do not exceed the absolute maximum ratings because stresses beyond the listed ratings can cause permanent damage to the devices. Always sequence V+ on first, followed by the logic inputs, NO or COM. If power-supply sequencing is not possible, add two small signal diodes (D1, D2) in series with the supply pins for overvoltage protection (Figure 1). Adding these diodes reduces the analog signal by one diode drop below V+ and one diode drop above GND, but does not affect the devices' low switch resistance and low leakage characteristics. Device operation is unchanged, and the difference between V+ and GND should not exceed 6V. Although it is not required, power-supply bypassing improves noise margin and prevents switching noise from propagating from the V+ supply to other components. A 0.1F capacitor connected from V+ to GND is adequate for most applications.
COM_
* *
*
NO_
*
GND D2 * INTERNAL PROTECTION DIODES
Figure 1. Overvoltage Protection Using External Blocking Diodes
Chip Information
TRANSISTOR COUNT: 205
8
________________________________________________________________________________________
Low-Voltage, 4, Quad, SPST, CMOS Analog Switches
Timing Diagrams/Test Circuits
MAX4651 MAX4652 MAX4653
SWITCH OUTPUT VO RL 300 CL 35pF
MAX4651/MAX4652/MAX4653
V+ LOGIC INPUT VIH + 0.5 0 t r < 5ns t f < 5ns SWITCH V COM_ INPUT t OFF IN_ VO SWITCH OUTPUT 0 t ON 90% 90% LOGIC INPUT GND COM_ V+ NO_ OR NC_
50%
LOGIC INPUT WAVEFORMS INVERTED FOR SWITCHES THAT HAVE THE OPPOSITE LOGIC SENSE.
REPEAT TEST FOR EACH SWITCH. FOR LOAD CONDITIONS, SEE Electrical Characteristics. CL INCLUDES FIXTURE AND STRAY CAPACITANCE. RL VO = VCOM RL + RON
(
)
Figure 2. Switching-Time Test Circuit
MAX4651 MAX4652 MAX4653
RGEN COM_
V+ V+ NC_ OR NO_ CL GND IN_ VO
VO VO VIN
V GEN
OFF
ON
OFF
VIN VIN
OFF
ON Q = (V O )(C L )
OFF
VIN DEPENDS ON SWITCH CONFIGURATION; INPUT POLARITY DETERMINED BY SENSE OF SWITCH.
Figure 3. Charge-Injection Test Circuit
_______________________________________________________________________________________
9
Low-Voltage, 4, Quad, SPST, CMOS Analog Switches MAX4651/MAX4652/MAX4653
Timing Diagrams/Test Circuits (continued)
C SIGNAL GENERATOR
V+
MAX4651 MAX4652 MAX4653
SIGNAL GENERATOR
C
V+
MAX4651 MAX4652 MAX4653
N01 IN2 VIN 50
V+ COM_
V+ COM1 IN1
IN_ ANALYZER RL NC_ OR NO_ GND
VIN
VIN
ANALYZER RL
N02 GND
COM2
NC
Figure 4. Off-Isolation Test Circuit/On-Channel Bandwidth
Figure 5. Crosstalk Test Circuit
C
V+
MAX4651 MAX4652 MAX4653
C
V+
MAX4651 MAX4652 MAX4653
V+ COM_ CAPACITANCE METER IN_ CAPACITANCE METER f = 1MHz NC_ OR NO_ GND VIN f = 1MHz
V+ COM_
IN_ NC_ OR NO_ GND
VIN
Figure 6. Switch Off-Capacitance Test Circuit
Figure 7. Switch On-Capacitance Test Circuit
10
______________________________________________________________________________________
Low-Voltage, 4, Quad, SPST, CMOS Analog Switches
Pin Configurations (continued)
COM1 COM2 COM1 COM2 COM1 IN1 IN2 IN1 IN2 IN1 16 NC1 1 N.C. 2 GND 3 15 14 13 12 NC2 11 V+ NO1 1 N.C. 2 GND 3 16 15 14 13 12 NO2 11 V+ NO1 1 N.C. 2 GND 3 16 15 IN2
MAX4651/MAX4652/MAX4653
TOP VIEW
14
13 12 NC2 11 V+
MAX4651
10 N.C.
MAX4652
10 N.C.
MAX4653
COM2 10 N.C. 9
NC4 4 5 COM4 6 IN4 7 IN3 8 COM3
9
NC3
NO4 4 5 COM4 6 IN4 7 IN3 8 COM3
9
NO3
NO4 4 5 COM4 6 IN4 7 IN3 8 COM3
NC3
QFN
QFN
QFN
N.C.
N.C.
N.C.
N.C.
N.C.
N.C.
N.C.
N.C.
20 COM1 1 NC1 2 GND 3
19
18
17
16 15 COM2 14 NC2 13 V+ COM1 1 NO1 2 GND 3
20
19
18
17
16 15 COM2 14 NO2 13 V+ COM1 1 NO1 2 GND 3
20
19
18
17
16 15 COM2 14 NC2 13 V+
MAX4651
MAX4652
MAX4653
NC4 4
12 NC3
NO4 4
12 NO3
NO4 4
N.C.
IN1
IN2
IN1
IN2
IN1
IN2
TOP VIEW
12 NC3
COM4 5 6 N.C. 7 IN4 8 N.C. 9 IN3 10 N.C.
11 COM3
COM4 5 6 N.C. 7 IN4 8 N.C. 9 IN3 10 N.C.
11 COM3
COM4 5 6 N.C. 7 IN4 8 N.C. 9 IN3 10 N.C.
11 COM3
QFN
QFN
QFN
Ordering Information (continued)
PART MAX4652EGE MAX4652EUE MAX4652ESE MAX4652EGP MAX4653EGE MAX4653EUE MAX4653ESE MAX4653EGP TEMP RANGE -40C to +85C -40C to +85C -40C to +85C -40C to +85C -40C to +85C -40C to +85C -40C to +85C -40C to +85C PIN-PACKAGE 16 QFN (4 4) 16 TSSOP 16 SO 20 QFN (4 4) 16 QFN (4 4) 16 TSSOP 16 SO 20 QFN (4 4)
______________________________________________________________________________________
11
Low-Voltage, 4, Quad, SPST, CMOS Analog Switches MAX4651/MAX4652/MAX4653
Package Information
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information, go to www.maxim-ic.com/packages.)
TSSOP.EPS
Note: The MAX4651/MAX4652/MAX4653 do not come in an exposed-pad package.
12
______________________________________________________________________________________
Low-Voltage, 4, Quad, SPST, CMOS Analog Switches
Package Information (continued)
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information, go to www.maxim-ic.com/packages.)
MAX4651/MAX4652/MAX4653
______________________________________________________________________________________
13
Low-Voltage, 4, Quad, SPST, CMOS Analog Switches MAX4651/MAX4652/MAX4653
Package Information (continued)
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information, go to www.maxim-ic.com/packages.)
14
______________________________________________________________________________________
Low-Voltage, 4, Quad, SPST, CMOS Analog Switches
Package Information (continued)
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information, go to www.maxim-ic.com/packages.)
MAX4651/MAX4652/MAX4653
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 ____________________ 15 (c) 2002 Maxim Integrated Products Printed USA is a registered trademark of Maxim Integrated Products.
SOICN.EPS

▲Up To Search▲

Price & Availability of MAX4651

	To Download MAX4651 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .