View MSM64153A_117953.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

E2E0029-38-95
Semiconductor MSM64153A/64153AL
Semiconductor
This version: Sep. 1998 MSM64153A/64153AL Previous version: Mar. 1996
4-Bit Microcontroller with Built-in LCD Driver and Melody Circuit
GENERAL DESCRIPTION
The MSM64153A (1.5 V)/64153AL (3.0 V) is a high-performance 4-bit microcontroller that incorporates Oki-original CPU core nX-4/20. The MSM64153A/64153AL has an LCD driver for up to 144 segments, an event counter, and melody circuits. It is best suited for applications such as clocks and LCD games.
FEATURES
* Operating range Operating voltage Operating temperature Operating frequency
: 1.5 V/3.0 V : -40 to +70 C : 32.768 kHz crystal oscillation Approx. 32 kHz RC oscillation Supply current (Typ.) : 0.9 mA (3.0 V at HALT mode) * Minimum instruction execution time : 91 ms * General memory space : 3040 bytes * Local memory space : 160 nibbles * LCD driver : 40 Common driver 4 Segment driver 36 1/4 duty, 1/3 bias; 144 segments (36 4) 1/3 duty, 1/3 bias; 108 segments (36 3) * I/O port Input-output port : 2 ports 4 bits (open-drain output/CMOS output selectable; pull-down resistor input/high-impedance input selectable) Input port : 1 port 2 bits (pull-down resistor input/high-impedance input selectable) 1 port 4 bits (pull-down resistor input/high-impedance input selectable) * Event counter : 1 channel * Melody output :2 * Interrupts : 10 sources External 4, time base 4, melody 2 * Package: 80-pin plastic QFP (QFP80-P-1420-0.80-BK) : (Product name : MSM64153A-GS-BK, MSM64153AL-GS-BK) Chip : MSM64153A-, MSM64153AL- indicates a code number. * OTP version (for program evaluation) : MSM64P155/64P155L (The package, power polarity, and operating voltage of the MSM64P155/64P155L are different from the MSM64153A/64153AL. For details, refer to the "MSM64P155 User's Manual".)
1/25
Semiconductor
MSM64153A/64153AL
BLOCK DIAGRAM
C2 C1 VSS3 VSS2 VSS1 COM4 COM3 COM2 COM1 COM DRV PORT ADDRESS LCD DRV SEG35
BIAS BSR TR2 TR0 (4) HALT C ALU A7 to A0 MIEF B A (4) (4) H L X Y (8) RAM 160N
PCM PCL
SEG0
TR1 PCH A8 to A11 ROM 3040B
LCD CNT
DB7 to DB0 OSC0 OSC1
TIMING CONTROLLER
DSPR
SP IR DECODER
ROMR
OSC
INTC MD0 MD0 MD0
IR
RESET TST1 TST2 TST3 VSSL
RST
TBC
(8) MD1 MD1
TST
PORT ADDRESS DB7 to DB0
MD1
VR
BUP
CAPR
PORT2
EVENT
PORT3
PORT6
PORT7
P2.0 P2.1 P2.2 P2.3
P3.0
P3.1
P6.0 P6.1 P6.2 P6.3
is the CPU core (nX-4/20).
P7.0 P7.1 P7.2 P7.3
VDD
2/25
Semiconductor
MSM64153A/64153AL
PIN CONFIGURATION (TOP VIEW)
77 SEG10
76 SEG11
75 SEG12
74 SEG13
73 SEG14
72 SEG15
71 SEG16
70 SEG17
69 SEG18
68 SEG19
67 SEG20
66 SEG21
SEG6 (NC) SEG5 SEG4 SEG3 SEG2 SEG1 SEG0 (NC) VSSL COM4 COM3 COM2 (NC) COM1 C2 C1 VSS3 VSS2 VSS1 TST3 (NC) TST2 TST1
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
65 SEG22
80 SEG7
78 SEG9
79 SEG8
64 SEG23 63 (NC) 62 SEG24 61 SEG25 60 SEG26 59 SEG27 58 SEG28 57 SEG29 56 SEG30 55 SEG31 54 SEG32 53 (NC) 52 SEG33 51 SEG34 50 SEG35 49 MD0 48 MD0 47 MD1 46 MD1 45 VDD 44 P7.0 43 (NC) 42 P7.1 41 P7.2
OSC0 25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
Note: Pins marked as (NC) are no-connection pins which are left open.
OSC1 P3.1 P3.0 P2.3 P2.2 P2.1 (NC) P2.0 (NC) P6.3 P6.2 P6.1 P6.0 RESET P7.3
80-Pin Plastic QFP
40
3/25
Semiconductor
MSM64153A/64153AL
PAD CONFIGURATION
Pad Layout
53 54 36 35
Y
X 71 1 17 18
Chip Size Chip Thickness Coordinate Origin Pad Hole Size Pad Size Minimum Pad Pitch
: : : : : :
4.08 mm 4.02 mm 350 mm (typ.) Chip center 110 mm 110 mm 120 mm 120 mm 180 mm
Note: The chip substrate voltage is VDD.
4/25
Semiconductor Pad Coordinates
Pad No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 Pad Name SEG5 SEG4 SEG3 SEG2 SEG1 SEG0 VSSL COM4 COM3 COM2 COM1 C2 C1 VSS3 VSS2 VSS1 TST3 TST2 TST1 OSC0 OSC1 P3.1 P3.0 P2.3 P2.2 P2.1 P2.0 P6.3 P6.2 P6.1 P6.0 RESET P7.3 P7.2 P7.1 P7.0 VDD MD1 MD1 MD0 X (m) -1697 -1482 -1270 -1058 -848 -637 -424 -201 10 222 430 641 854 1065 1275 1486 1697 1889 1889 1889 1889 1889 1889 1889 1889 1889 1889 1889 1889 1889 1889 1889 1889 1889 1889 1796 1585 1378 1172 962 Y (m) -1809 -1809 -1809 -1809 -1809 -1809 -1809 -1809 -1809 -1809 -1809 -1809 -1809 -1809 -1809 -1809 -1809 -1712 -1516 -1319 -1123 -927 -730 -536 -338 -141 55 251 448 644 840 1036 1233 1429 1625 1809 1809 1809 1809 1809 Pad No. 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71
MSM64153A/64153AL
Pad Name MD0 SEG35 SEG34 SEG33 SEG32 SEG31 SEG30 SEG29 SEG28 SEG27 SEG26 SEG25 SEG24 SEG23 SEG22 SEG21 SEG20 SEG19 SEG18 SEG17 SEG16 SEG15 SEG14 SEG13 SEG12 SEG11 SEG10 SEG9 SEG8 SEG7 SEG6
X (m) 755 547 339 131 -77 -284 -494 -701 -907 -1116 -1324 -1530 -1743 -1889 -1889 -1889 -1889 -1889 -1889 -1889 -1889 -1889 -1889 -1889 -1889 -1889 -1889 -1889 -1889 -1889 -1889
Y (m) 1809 1809 1809 1809 1809 1809 1809 1809 1809 1809 1809 1809 1809 1599 1409 1214 1019 829 639 449 260 70 -120 -310 -501 -693 -885 -1078 -1271 -1465 -1656
5/25
Semiconductor
MSM64153A/64153AL
PIN DESCRIPTIONS
Basic Functions
Function Power Supply Pin 45 20 19 18 17 16 10 Oscillation 25 26 Test 24 23 21 RESET 39 Pad 37 16 15 14 13 12 7 20 21 19 18 17 32 Symbol VDD VSS1 VSS2 VSS3 C1 C2 VSSL OSCO OSC1 TST1 TST2 TST3 RESET Type -- -- -- -- -- -- -- I O I I I I System reset input pin : Setting this pin to "H" level puts this device into a reset state. Then, setting this pin to "L" level starts executing an instruction from address 0000H. This pin is internally connected to VSS1 or VSS2 through a pull-down resistor. Description Digital supply voltage (0 V) Digital negative power supply (1.5 V spec.) Bias output for LCD driver (3.0 V spec.) Digital negative power supply (3.0 V spec.) Bias output for LCD driver (1.5 V spec.) Bias output for LCD driver (-4.5 V) For connection to capacitors that generate bias for the LCD driver Negative power supply voltage pin for internal logic (An internally generated constant voltage is present at this pin.) Clock oscillation pins: Either a crystal (32.768 kHz) and a capacitor (10 to 30 pF) are connected to these pins or a resistor (1 MW) is. Input pins for test
6/25
Semiconductor Basic Functions (continued)
Function Ports Pin 33 31 30 29 Pad 27 26 25 24 Symbol P2.0 P2.1 P2.2 P2.3 Type I
MSM64153A/64153AL
Description 4-bit input port (port 2) : Select between pull-down resistor input and high impedance input for each bit with the port 2 control register (P2CON). When configured for secondary functions, an external interrupt and capture circuit trigger input are allocated. If P2.0 to P2.3 are set to "H" level, the device enters system reset mode. 2-bit input port (port 3) : Select between pull-down resistor input and high impedance input with the port 3 control register (P3CON). When configured for a secondary function, an external interrupt is allocated to P3.0 and an event counter is allocated to P3.1. 4-bit input-output port (port 6) : Select between input and output, between pull-down resistor input and high impedance input, and between open-drain output and CMOS output with the port 6 control register (P6CON). When configured for a secondary function, an external interrupt is allocated. 4-bit input-output port (port 7) : Select between input and output, between pull-down resistor input and high impedance input, and between open-drain output and CMOS output with the port 7 control register (P7CON). When configured for a secondary function, an external interrupt is allocated. Output pin of melody driver 0 Inverted output pin of MD0 output Output pin of melody driver 1 Inverted output pin of MD1 output LCD common signal output pins
28 27
23 22
P3.0 P3.1
I
38 37 36 35 44 42 41 40 Melody Drivers 48 49 46 47 LCD Drivers 15 13 12 11
31 30 29 28 36 35 34 33 40 41 38 39 11 10 9 8
P6.0 P6.1 P6.2 P6.3 P7.0 P7.1 P7.2 P7.3 MD0 MD0 MD1 MD1 COM1 COM2 COM3 COM4
I/O
I/O
O O O O O O O O
7/25
Semiconductor Basic Functions (continued)
Function LCD Drivers Pin 8 7 6 5 4 3 1 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 62 61 60 59 58 57 56 55 54 52 51 50 Pad 6 5 4 3 2 1 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 Symbol SEG0 SEG1 SEG2 SEG3 SEG4 SEG5 SEG6 SEG7 SEG8 SEG9 SEG10 SEG11 SEG12 SEG13 SEG14 SEG15 SEG16 SEG17 SEG18 SEG19 SEG20 SEG21 SEG22 SEG23 SEG24 SEG25 SEG26 SEG27 SEG28 SEG29 SEG30 SEG31 SEG32 SEG33 SEG34 SEG35 Type O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O
MSM64153A/64153AL
Description LCD segment signal output pins
8/25
Semiconductor Secondary Functions
Function External Interrupts Pin 33 31 30 29 Pad 27 26 25 24 Symbol P2.0 P2.1 P2.2 P2.3 Type I
MSM64153A/64153AL
Description P2.0 to P2.3 secondary functions : These are level-triggered external interrupt input pins. Select interrupt enable/disable for each bit with the P2 interrupt enable register (P2IE). If P2.0 to P2.3 pins are set to "H" level for a minimum of 2 seconds, the device enters system reset mode. P2.0, P2.1 secondary functions : trigger input pins for capture circuit. P3.0 secondary function : This is an input pin for external interrupt. This pin can receive an interrupt at a rising edge, a falling edge, or at both rising and falling edges. P6.0 to P6.3 secondary functions : These are level-triggered external interrupt input pins.
28
23
P3.0
I
38 37 36 35 44 42 41 40 Event Counter Input 27
31 30 29 28 36 35 34 33 22
P6.0 P6.1 P6.2 P6.3 P7.0 P7.1 P7.2 P7.3 P3.1
I
I
P7.0 to P7.3 secondary functions : These are level-triggered external interrupt input pins.
I
P3.1 secondary function : Input port for event counter
9/25
Semiconductor Handling When Specific Pins Are Not Used
Symbol P2.0 to P2.3 P3.0, P3.1 P6.0 to P6.3 P7.0 to P7.3 MD0, MD0 MD1, MD1 TST1 to TST3 Open "L" level or open "L" level or open In input mode : "L" level or open (Initial setting: input mode) In output mode : Open In input mode : "L" level or open (Initial setting: input mode) In output mode : Open Open Recommended Pin Connection
MSM64153A/64153AL
COM1 to COM4 Open SEG0 to SEG35 Open
10/25
Semiconductor
MSM64153A/64153AL
ABSOLUTE MAXIMUM RATINGS
1.5 V Spec. (MSM64153A)
(VDD = 0 V) Parameter Power Supply Voltage 1 Power Supply Voltage 2 Power Supply Voltage 3 Power Supply Voltage 4 Input Voltage 1 Input Voltage 2 Output Voltage 1 Output Voltage 2 Output Voltage 3 Output Voltage 4 Storage Temperature Symbol VSS1 VSS2 VSS3 VSSL VIN1 VIN2 VOUT1 VOUT2 VOUT3 VOUT4 TSTG Condition Ta = 25C Ta = 25C Ta = 25C Ta = 25C VSS1 input, Ta = 25C VSSL input,Ta = 25C VSS1 output,Ta = 25C VSS2 output,Ta = 25C VSS3 output,Ta = 25C VSSL output,Ta = 25C -- Rating -2.0 to +0.3 -4.0 to +0.3 -5.5 to +0.3 -2.0 to +0.3 VSS1 - 0.3 to +0.3 VSSL - 0.3 to +0.3 VSS1 - 0.3 to +0.3 VSS2 - 0.3 to +0.3 VSS3 - 0.3 to +0.3 VSSL - 0.3 to +0.3 -55 to +150 Unit V V V V V V V V V V C
RECOMMENDED OPERATING CONDITIONS
1.5 V Spec. (MSM64153A)
(VDD = 0 V) Parameter Operating Temperature Operating Voltage Crystal Oscillation Frequency External RC Oscillator Resistance Symbol Top VSS1 fXT ROS Condition -- BUPF = "0" BUPF = "1" -- -- Range -40 to +70 -1.7 to -1.25 -1.7 to -1.15 30 to 35 1M 10% Unit C V kHz W
11/25
Semiconductor
MSM64153A/64153AL
ELECTRICAL CHARACTERISTICS
1.5 V Spec. (MSM64153A) DC Characteristics
(VDD = 0 V, VSS1 = -1.5 V, Ta = -40 to +70C unless otherwise specified.) Parameter Symbol Condition Ca, Cb, C12 = 0.1 mF +100% -20% Ta = -40 to +60C BUPF = "0" Ca, Cb, C12 = 0.1 mF +100% -20% Ta = -40 to +70C BUPF = "0" Ca, Cb, C12 = 0.1 mF +100% -20% Ta = -40 to +60C BUPF = "1" Ca, Cb, C12 = 0.2 mF +100% -20% Ta = -40 to +70C BUPF = "1" Ca, Cb, C12 = 0.1 mF +100% -20% Ta = -40 to +60C BUPF = "0" Ca, Cb, C12 = 0.1 mF +100% -20% Ta = -40 to +70C BUPF = "0" Ca, Cb, C12 = 0.1 mF +100% Ta = -40 to +60C -20% BUPF = "1" Ca, Cb, C12 = 0.2 mF +100% Ta = -40 to +70C -20% BUPF = "1" BUPF = "0" BUPF = "1" Oscillation start time: within 5 seconds after reset -- -- -- ROS = 1 MW Min. Typ. Max. Unit Measuring Circuit
-3.2 -3.0 -2.8
-3.2 -3.0 -2.7 V -3.2 -3.0 -2.5
VSS2 Voltage
VSS2
-3.2 -3.0 -2.3 1 1' -4.7 -4.5 -4.2
-4.7 -4.5 -4.0 V -4.7 -4.5 -3.9
VSS3 Voltage
VSS3
-4.7 -4.5 -3.7 -1.5 -1.3 -0.6 -1.9 -1.3 -0.6 -- -- 10 10 15 -- -- -- 15 40 -1.45 -1.15 30 20 75
VSSL Voltage Crystal Oscillation Start Voltage Crystal Oscillation Hold Voltage External Crystal Oscillator Capacitance Internal Crystal Oscillator Capacitance RC Oscillation Frequency
VSSL VSTA VHOLD CG CD fCR
V V V 1 pF pF kHz 1'
12/25
Semiconductor DC Characteristics (continued) * 32.768 kHz crystal oscillation
MSM64153A/64153AL
(VDD = 0 V, VSS1 = -1.5 V, Ta = -40 to +70C unless otherwise specified.) Parameter Supply Current 1 Supply Current 1 Supply Current 2 Supply Current 2 Symbol IDD1 IDD1 IDD2 IDD2 Condition CPU is in HALT state BUPF = "0" CPU is in HALT state BUPF = "1" BUPF = "0" BUPF = "1" Min. Typ. Max. Unit 2.0 2.0 3.0 3.0 6.0 6.0 10 10 6.0 40 10 50 15 50 25 60 mA mA mA mA mA mA mA mA 1 Measuring Circuit
Ta = -40 to +40C -- Ta = +40 to +70C -- Ta = -40 to +40C -- Ta = +40 to +70C -- Ta = +40 to +70C -- Ta = +40 to +70C --
CPU is in operation state Ta = -40 to +40C -- CPU is in operation state Ta = -40 to +40C --
* RC oscillation
(VDD = 0 V, VSS1 = -1.5 V, ROS = 1 MW, Ta = -40 to +70C unless otherwise specified.) Parameter Supply Current 1 Supply Current 1 Supply Current 2 Supply Current 2 Symbol IDD1 IDD1 IDD2 IDD2 Condition CPU is in HALT state BUPF = "0" CPU is in HALT state BUPF = "1" BUPF = "0" BUPF = "1" Min. Typ. Max. Unit 3.0 3.0 6.0 6.0 7.0 7.0 15 15 10 45 15 50 20 50 30 70 mA mA mA mA mA mA mA mA 1' Measuring Circuit
Ta = -40 to +40C -- Ta = +40 to +70C -- Ta = -40 to +40C -- Ta = +40 to +70C -- Ta = +40 to +70C -- Ta = +40 to +70C --
CPU is in operation state Ta = -40 to +40C -- CPU is in operation state Ta = -40 to +40C --
13/25
Semiconductor DC Characteristics (continued)
MSM64153A/64153AL
(VDD = 0 V, VSS1 = VSSL = -1.5 V, VSS2 = -3.0 V, VSS3 = -4.5 V, Ta = -40 to +70C unless otherwise specified.) Parameter (Pin Name) Output Current 1 (MD0, MD0) (MD1, MD1) Output Current 2 (SEG0 to SEG35) (COM1 to COM4) Symbol IOH1 IOL1 IOH2 IOMH2 IOMH2S IOML2 IOML2S IOL2 Output Current 3 (P6.0 to P6.3) (P7.0 to P7.3) Output Leakage Current (P6.0 to P6.3) (P7.0 to P7.3) Input Current 1 (P2.0 to P2.3) (P3.0, P3.1) (P6.0 to P6.3) (P7.0 to P7.3) IOH3 IOL3 IOOH IOOL IIH1 IIH1Z IIL1 Input Current 2
(TST1, TST2, TST3)
Condition VOH1 = -0.5 V VOL1 = VSS1 + 0.5 V VOH2 = -0.2 V VOMH2 = VSS1 + 0.2 V VOMH2S = VSS1 - 0.2 V VOML2 = VSS2 + 0.2 V VOML2S = VSS2 - 0.2 V VOL2 = VSS3 + 0.2 V VOH3 = -0.5 V VOL3 = VSS1 + 0.5 V VOH = VDD VOL = VSS1 VIH1 = VDD VIH1 = VDD VIL1 = VSS1 VIH2 = VDD VIL2 = VSS1 VIH3 = VDD VIL3 = VSS1 -- (When pulled down) (In a high-impedance state) (VDD level) (VSS1 level) (VSS1 level) (VSS2 level) (VSS2 level) (VSS3 level)
Min. Typ. Max. Unit -2.0 -0.6 -0.1 0.1 -- 4.0 -- 4.0 -- 4.0 0.6 -- -- -- -- -- -- 2.0 -4.0 -- -4.0 -- -4.0 -- mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA V
Measuring Circuit
2
-5.0 -2.1 -0.3 0.1 -- -0.3 1.0 0 -1.0 0.3 -1.0 15 -1.0 -0.3 0.7 -- -- 20 -- -- 0.75 -- 40 -- -- 2.0 0.3 -- 100 1.0 0 1.5 0 100 0 0
3
IIH2 IIL2 IIH3 IIL3 VIH1
Input Current 3 (RESET) Input Voltage 1 (P2.0 to P2.3) (P3.0, P3.1) (P6.0 to P6.3) (TST1, TST2, TST3) (RESET)
4 VIL1 -- -1.5 -- -1.2 V
14/25
Semiconductor Measuring circuit 1
MSM64153A/64153AL
OSC1 Crystal 32.768 kHz OSC0
VDD CG
MSM64153A
C1 C12 C2
VSSL VDD VSS1 VSS2 VSS3
CL
Ca V A V
Cb V
Ca, Cb, C12 CL CG
: 0.1 to 0.2 mF : 0.1 mF : 15 pF
Measuring circuit 1'
OSC1 ROS OSC0
MSM64153A
C1 C12 C2
VSSL VDD VSS1 VSS2 VSS3
CL
Ca V A V
Cb V
Ca, Cb, C12 CL ROS
: 0.1 to 0.2 mF : 0.1 mF : 1 MW
15/25
Semiconductor Measuring circuit 2
MSM64153A/64153AL
(*2) VIH (*1) VIL A
MSM64153A
VDD
VSS1
VSS2
VSS3
VSSL
Measuring circuit 3
(*3) A
MSM64153A
VDD
VSS1
VSS2
VSS3
VSSL
OUTPUT
INPUT
OUTPUT
INPUT
16/25
Semiconductor Measuring circuit 4
MSM64153A/64153AL
VIH (*3) VIL
MSM64153A
VDD
VSS1
VSS2
VSS3
VSSL
*1 Input logic circuit to determine the specified measuring conditions. *2 Measured at the specified output pins. *3 Measured at the specified input pins.
OUTPUT
INPUT
Waveform Monitoring
17/25
Semiconductor
MSM64153A/64153AL
ABSOLUTE MAXIMUM RATINGS
3.0 V Spec. (MSM64153AL)
(VDD = 0 V) Parameter Power Supply Voltage 1 Power Supply Voltage 2 Power Supply Voltage 3 Power Supply Voltage 4 Input Voltage 1 Input Voltage 2 Output Voltage 1 Output Voltage 2 Output Voltage 3 Storage Temperature Symbol VSS1 VSS2 VSS3 VSSL VIN1 VIN2 VOUT1 VOUT2 VOUT3 TSTG Condition Ta = 25C Ta = 25C Ta = 25C Ta = 25C VSS2 input, Ta = 25C VSSL input,Ta = 25C VSS2 output,Ta = 25C VSS3 output,Ta = 25C VSSL output,Ta = 25C -- Rating -2.0 to +0.3 -4.0 to +0.3 -5.5 to +0.3 -4.0 to +0.3 VSS2 - 0.3 to +0.3 VSSL - 0.3 to +0.3 VSS2 - 0.3 to +0.3 VSS3 - 0.3 to +0.3 VSSL - 0.3 to +0.3 -55 to +150 Unit V V V V V V V V V C
RECOMMENDED OPERATING CONDITIONS
3.0 V Spec. (MSM64153AL)
(VDD = 0 V) Parameter Operating Temperature Operating Voltage Crystal Oscillation Frequency External RC Oscillator Resistance Symbol Top VSS2 fXT ROS Condition -- BUPF = "0" BUPF = "1" -- -- Range -40 to +70 -3.5 to -2.5 -3.5 to -2.0 30 to 66 1 M 10% Unit C V kHz W
18/25
Semiconductor
MSM64153A/64153AL
ELECTRICAL CHARACTERISTICS
3.0 V Spec. (MSM64153AL) DC Characteristics
(VDD = 0 V, VSS2 = -3.0 V, Ta = -40 to +70C unless otherwise specified.) Parameter VSS1 Voltage VSS3 Voltage VSSL Voltage Crystal Oscillation Start Voltage Crystal Oscillation Hold Voltage External Crystal Oscillator Capacitance Internal Crystal Oscillator Capacitance RC Oscillation Frequency Symbol VSS1 VSS3 VSSL VSTA VHOLD CG CD fCR ROS = 1 MW Condition Ca, Cb, C12 = 0.1 mF +100% -20% Ca, Cb, C12 = 0.1 mF +100% -20% BUPF = "0" BUPF = "1" Oscillation start time: within 5 seconds after reset -- -- -- Min. Typ. Max. Unit -1.7 -1.5 -1.3 -4.7 -4.5 -4.2 -1.5 -1.3 -0.6 -1.9 -1.3 -0.6 -- -- 10 10 15 -- -- -- 15 40 -2.5 -2.0 30 20 75 V V V V V 1 pF pF kHz 1' 1 1' Measuring Circuit
19/25
Semiconductor DC Characteristics (continued) * 32.768 kHz crystal oscillation
MSM64153A/64153AL
(VDD = 0 V, VSS2 = -3.0 V, Ta = -40 to +70C unless otherwise specified.) Parameter Supply Current 1 Supply Current 1 Supply Current 2 Supply Current 2 Symbol IDD1 IDD1 IDD2 IDD2 Condition CPU is in HALT state BUPF = "0" CPU is in HALT state BUPF = "1" BUPF = "0" BUPF = "1" Min. Typ. Max. Unit 0.9 0.9 1.5 1.5 3.0 3.0 5.0 5.0 4.5 30 6.0 40 10 40 15 50 mA mA mA mA mA mA mA mA 1 Measuring Circuit
Ta = -40 to +40C -- Ta = +40 to +70C -- Ta = -40 to +40C -- Ta = +40 to +70C -- Ta = +40 to +70C -- Ta = +40 to +70C --
CPU is in operation state Ta = -40 to +40C -- CPU is in operation state Ta = -40 to +40C --
* RC oscillation
(VDD = 0 V, VSS2 = -3.0 V, ROS = 1 MW, Ta = -40 to +70C unless otherwise specified.) Parameter Supply Current 1 Supply Current 1 Supply Current 2 Supply Current 2 Symbol IDD1 IDD1 IDD2 IDD2 Condition CPU is in HALT state BUPF = "0" CPU is in HALT state BUPF = "1" BUPF = "0" BUPF = "1" Min. Typ. Max. Unit 1.5 1.5 3.0 3.0 4.0 4.0 8.0 8.0 6.0 40 10 50 12 50 25 60 mA mA mA mA mA mA mA mA 1' Measuring Circuit
Ta = -40 to +40C -- Ta = +40 to +70C -- Ta = -40 to +40C -- Ta = +40 to +70C -- Ta = +40 to +70C -- Ta = +40 to +70C --
CPU is in operation state Ta = -40 to +40C -- CPU is in operation state Ta = -40 to +40C --
20/25
Semiconductor DC Characteristics (continued)
MSM64153A/64153AL
(VDD = 0 V, VSS1 = VSSL = -1.5 V, VSS2 = -3.0 V, VSS3 = -4.5 V, Ta = -40 to +70C unless otherwise specified.) Parameter (Pin Name) Output Current 1 (MD0, MD0) (MD1, MD1) Output Current 2 (SEG0 to SEG35) (COM1 to COM4) Symbol IOH1 IOL1 IOH2 IOMH2 IOMH2S IOML2 IOML2S IOL2 Output Current 3 (P6.0 to P6.3) (P7.0 to P7.3) Output Leakage Current (P6.0 to P6.3) (P7.0 to P7.3) Input Current 1 (P2.0 to P2.3) (P3.0, P3.1) (P6.0 to P6.3) (P7.0 to P7.3) IOH3 IOL3 IOOH IOOL IIH1 IIH1Z IIL1 Input Current 2
(TST1, TST2, TST3)
Condition VOH1 = -0.5 V VOL1 = VSS2 + 0.5 V VOH2 = -0.2 V VOMH2 = VSS1 + 0.2 V VOMH2S = VSS1 - 0.2 V VOML2 = VSS2 + 0.2 V VOML2S = VSS2 - 0.2 V VOL2 = VSS3 + 0.2 V VOH3 = -0.5 V VOL3 = VSS2 + 0.5 V VOH = VDD VOL = VSS2 VIH1 = VDD VIH1 = VDD VIL1 = VSS2 VIH2 = VDD VIL2 = VSS2 VIH3 = VDD VIL3 = VSS2 -- (When pulled down) (In a high-impedance state) (VDD level) (VSS1 level) (VSS1 level) (VSS2 level) (VSS2 level) (VSS3 level)
Min. Typ. Max. Unit -6.0 -1.8 -0.7 0.7 -- 4.0 -- 4.0 -- 4.0 -18 0.7 -- -0.3 50 0 -1.0 0.75 -1.0 40 -1.0 -0.6 1.8 -- -- -- -- -- -- 6.0 -4.0 -- -4.0 -- -4.0 -- mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA V
Measuring Circuit
2
-6.0 -2.0 1.6 -- -- 100 -- -- 1.5 -- 80 -- -- 6.0 0.3 -- 300 1.0 0 3.0 0 200 0 0
3
IIH2 IIL2 IIH3 IIL3 VIH1
Input Current 3 (RESET) Input Voltage 3 (P2.0 to P2.3) (P3.0, P3.1) (P6.0 to P6.3) (TST1, TST2, TST3) (RESET)
4 VIL1 -- -3.0 -- -2.4 V
21/25
Semiconductor Measuring circuit 1
MSM64153A/64153AL
OSC1 Crystal 32.768 kHz OSC0
VDD CG
MSM64153AL
C1 C12 C2
VSSL VDD VSS2 VSS1 VSS3
CL
Ca V A V
Cb V
Ca, Cb, C12, CL CG
: 0.1 mF : 15 pF
Measuring circuit 1'
OSC1 ROS OSC0
MSM64153AL
C1 C12 C2
VSSL VDD VSS2 VSS1 VSS3
CL
Ca V A V
Cb V
Ca, Cb, C12, CL ROS
: 0.1 mF : 1 MW
22/25
Semiconductor Measuring circuit 2
MSM64153A/64153AL
(*2) VIH (*1) VIL A
MSM64153AL
VDD
VSS1
VSS2
VSS3
VSSL
Measuring circuit 3
(*3) A
OUTPUT
INPUT
MSM64153AL
VDD
VSS1
VSS2
VSS3
VSSL
OUTPUT
INPUT
23/25
Semiconductor Measuring circuit 4
MSM64153A/64153AL
VIH (*3) VIL
MSM64153AL
VDD
VSS1
VSS2
VSS3
VSSL
*1 Input logic circuit to determine the specified measuring conditions. *2 Measured at the specified output pins. *3 Measured at the specified input pins.
OUTPUT
INPUT
Waveform Monitoring
24/25
Semiconductor
MSM64153A/64153AL
PACKAGE DIMENSIONS
(Unit : mm) QFP80-P-1420-0.80-BK
Mirror finish
Package material Lead frame material Pin treatment Solder plate thickness Package weight (g)
Epoxy resin 42 alloy Solder plating 5 mm or more 1.27 TYP.
Notes for Mounting the Surface Mount Type Package The SOP, QFP, TSOP, SOJ, QFJ (PLCC), SHP and BGA are surface mount type packages, which are very susceptible to heat in reflow mounting and humidity absorbed in storage. Therefore, before you perform reflow mounting, contact Oki's responsible sales person for the product name, package name, pin number, package code and desired mounting conditions (reflow method, temperature and times).
25/25

▲Up To Search▲

Price & Availability of MSM64153A

	To Download MSM64153A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .