 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Optical disc ICs 4-channel BTL driver for CD players BA6198S / BA6198FP The BA6198S and BA6198FP are ICs with an internal 4-channel BTL power driver for CD players, a 5V regulator (requires attached PNP transistor), standard operational amplifier, and reset output pin. All driver channels have a gain adjustment pin, and so can be set to the desired gain. In addition, the internal level shift circuit helps reduce the number of attached components. FApplications CD players, CD-ROM drives and other optical disc devices FFeatures 1) 4-channel BTL driver on a HSOP 28-pin power package (BA6198FP), allowing for application miniaturization. 2) Gain is adjustable with an attached resistor. 3) Internal thermal shutdown circuit. 4) Internal 5V regulator (requires attached PNP resistor) 5) Internal standard operational amplifier. 6) Reset output pin. FAbsolute maximum ratings (Ta = 25_C) FRecommended operating conditions (Ta = 25_C) 308 Optical disc ICs FBlock diagram BA6198S / BA6198FP FPin descriptions 309 Optical disc ICs FInput / output circuits Parentheses ( ) indicate BA6198S BA6198S / BA6198FP 310 Optical disc ICs BA6198S / BA6198FP FElectrical characteristics (unless otherwise noted, Ta = 25_C, VCC = 8V, f = 1kHz, RL = 8) 311 Optical disc ICs FMeasurement circuit BA6198S / BA6198FP 312 Optical disc ICs FMeasurement circuit switch table BA6198S / BA6198FP 313 Optical disc ICs FApplication example BA6198S / BA6198FP 314 Optical disc ICs FOperation notes (1) Relationship between mute and reset output BA6198S / BA6198FP Drop in regulator voltage When the regulator voltage drops below 4.0V (typically), the reset output changes to the low level and the IC is simultaneously muted. When the regulator voltages rises above 4.2V (typically), reset output changes to the high level and muting is released. Drop in bias voltage When the bias pin voltage drops below 1.4V (typically), the IC is muted and the reset output simultaneously changes to the low level. During ordinary use, the bias voltage should be kept above 1.6V. Thermal shutdown When the chip temperature rises above 175_C (typically), the IC is muted and the reset output simultaneously changes to the low level. Muting When the mute pin voltage is opened or lowered below 0.5V, the IC is muted, but the reset output remains the same. (2) Muting occurs during thermal shutdown, mute-on operations or a drop in the bias pin voltage or regulator voltage. In each case, only the drivers are muted. During muting, the output pins remain at the internal bias voltage, roughly (VCC-VF) / 2. (3) Be sure to connect the IC to a 0.1F bypass capacitor between the power supplies, at the base of the IC. (4) The radiating fin is connected to the package's internal GND, but should also be connected to an external ground. (5) The capacitor between regulator output (pin 8) and GND also serves to prevent oscillation of the IC, so select one with good temperature characteristics. FElectrical characteristic curves 315 Optical disc ICs BA6198S / BA6198FP 316 Optical disc ICs FExternal dimensions (Units: mm) BA6198S / BA6198FP 317 |
Price & Availability of BA6198
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |