View MBRF1660_159902.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

NEW PRODUCT
NEW PRODUCT
NEW PRODUCT
MBRF1635 THRU MBRF1660
SCHOTTKY ISOLATED PLASTIC RECTIFIER
Reverse Voltage - 35 to 60 Volts
ITO-220AC
0.405 (10.27) 0.383 (9.72) 0.188 (4.77) 0.172 (4.36) 0.110 (2.80) 0.100 (2.54) 0.140 (3.56) DIA. 0.130 (3.30) 0.131 (3.39) DIA. 0.122 (3.08)
Forward Current - 16.0 Amperes FEATURES
Isolated plastic package has Underwriters Laboratory Flammability Classifications 94V-0 Metal silicon junction majority carrier conduction Low power loss, high efficiency High current capability, low forward voltage drop High surge capability Guardring for overvoltage protection For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications High temperature soldering guaranteed: 250C/10 seconds, 0.25" (6.35mm) from case
0.600 (15.5) 0.580 (14.5) 0.676 (17.2) 0.646 (16.4)
2
0.350 (8.89) 0.330 (8.38)
PIN 1
0.191 (4.85) 0.171 (4.35) 0.560 (14.22) 0.530 (13.46) 0.060 (1.52) 0.110 (2.80) 0.100 (2.54)
MECHANICAL DATA
0.037 (0.94) 0.027 (0.69) 0.205 (5.20) 0.195 (4.95)
PIN 1 PIN 2
0.022 (0.55) 0.014 (0.36)
Dimensions in inches and (millimeters)
Case: ITO-220AC fully overmolded plastic body Terminals: Lead solderable per MIL-STD-750, Method 2026 Polarity: As marked Mounting Position: Any Weight: 0.08 ounce, 2.24 grams Mounting Torque: 5 in. - lbs. max.
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25C ambient temperature unless otherwise specified SYMBOLS MBRF1635 MBRF1645 MBRF1650 MBRF1660 UNITS
Maximum repetitive peak reverse voltage Maximum working peak reverse voltage Maximum DC blocking voltage Maximum average forward rectified current at TC=110C Peak repetitive forward current at TC=110C (rated VR, sq. wave,20 KHZ) Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Peak repetitive reverse surge current (NOTE 1) Maximum instantaneous forward voltage at: (NOTE 2) IF=16A, TC=25C IF=16A, TC=125C Maximum instantaneous reverse current at rated DC blocking voltage TC= 25C TC=125C (NOTE 2) Voltage rate of change (rated VR) Maximum typical thermal resistance (NOTE 3) Operating junction temperature range Storage temperature range RMS Isolation voltage from terminals to heatsink with RH 30%
NOTES: (1) 2.0ms pulse width, f=1.0 KHZ (2) Pulse test: 300ms pulse width, 1% duty cycle (3) Thermal resistance from junction to case per leg (4) Clip mounting (on case), where lead does not overlap heatsink with 0.110O offset. (5) Clip mounting (on case), where leads do overlap heatsink. (6) Screw mounting with 4-40 screw, where washer diameter is 4.9 mm (0.19O).
VRRM VRWM VDC I(AV) IFRM
35 35 35
45 45 45 16.0 32.0
50 50 50
60 60 60
Volts Volts Volts Amps Amps
IFSM IRRM VF 1.0 0.63 0.57 0.2 40.0
150.0 0.5 0.75 0.65 1.0 50.0 10,000 3.0 -65 to +150 -65 to +175 4500 (NOTE 4) 3500 (NOTE 5) 1500 (NOTE 6)
Amps Amps Volts
IR dv/dt RQJC TJ TSTG VISOL
mA V/ms C/W C C Volts
2/18/99
RATINGS AND CHARACTERISTIC CURVES MBRF1635 THRU MBRF1660
FIG. 1 - FORWARD CURRENT DERATING CURVE PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD CURRENT, AMPERES
FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT
20
RESISTIVE OR INDUCTIVE LOAD
150 125 100 75 50 25 0 1 10
NUMBER OF CYCLES AT 60 HZ
TJ=TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method)
16 12 8 4 0
0
50
100
150
100
CASE TEMPERATURE, C
FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS
FIG. 4 - TYPICAL REVERSE CHARACTERISTICS
50
50
INSTANTANEOUS FORWARD CURRENT, AMPERES
PULSE WIDTH=300ms 1% DUTY CYCLE TJ=150C
10
INSTANTANEOUS REVERSE CURRENT, MIILIAMPERES
10
TJ=125C
1
1
TJ=25C
0.1
MBRF1635 - MBRF1645 MBRF1650 & MBRF1660
0.1
TJ=75C
0.01
TJ=25C
0.01
0
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2
INSTANTANEOUS FORWARD VOLTAGE, VOLTS
MBRF1635 - MBRF1645 MBRF1650 & MBRF1660
0.001
0
20
40
60
80
100
PERCENT OF RATED PEAK REVERSE VOLTAGE, %
FIG. 5 - TYPICAL JUNCTION CAPACITANCE PER LEG TRANSIENT THERMAL IMPEDANCE, C/W
FIG. 6 - TYPICAL TRANSIENT THERMAL IMPEDANCE PER LEG
5,000
JUNCTION CAPACITANCE, pF
TJ=25C f=1.0 MHz Vsig=50mVp-p
100
10
1,000
1
MBRF1635 - MBRF1645 MBRF1650 & MBRF1660
100 0.1
1
10
100
REVERSE VOLTAGE, VOLTS
0.1 0.01
0.1
1
10
100
t, PULSE DURATION, sec.

▲Up To Search▲

Price & Availability of MBRF1660

	To Download MBRF1660 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .