![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
(R) EL7182 Data Sheet January 1996, Rev. B FN7281 2-Phase, High Speed CCD Driver The EL7182 is extremely well suited for driving CCD's, especially where high contrast imaging is desirable. The 16V supply rating is attractive for higher voltage CCD applications, as in color fax machines. The input is TTL and 3V compatible. The low quiescent current requirement is advantageous in portable/battery powered systems. The EL7182 is available in 8-pin PDIP and 8-lead SO packages. Features * 3V and 5V Input compatible * Clocking speeds up to 10MHz * Reduced clock skew * 20ns Switching/delay time * 2A Peak drive * Low quiescent current * Wide operating voltage--4.5V-16V Pinout EL7182 (8-PIN PDIP, SO) TOP VIEW Applications * CCD Drivers requiring high-contrast imaging * Differential line drivers * Push-pull circuits Ordering Information PART NUMBER Manufactured under U.S. Patent Nos. 5,334,883, #5,341,047 EL7182CN EL7182CS TEMP. RANGE -40C to +85C -40C to +85C PACKAGE 8-Pin PDIP 8-Pin SO PKG. NO. MDP0031 MDP0027 1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc. Copyright (c) Intersil Americas Inc. 2003. All Rights Reserved. Elantec is a registered trademark of Elantec Semiconductor, Inc. All other trademarks mentioned are the property of their respective owners. EL7182 Absolute Maximum Ratings (TA = 25C) Supply (V+ to Gnd) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16.5V Input Pins . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to +0.3V above V+ Combined Peak Output Current. . . . . . . . . . . . . . . . . . . . . . . . . . .4A Storage Temperature Range . . . . . . . . . . . . . . . . . .-65C to +150C Ambient Operating Temperature . . . . . . . . . . . . . . . .-40C to +85C Operating Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . 125C Power Dissipation SOIC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .570mW PDIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1050mW CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. IMPORTANT NOTE: All parameters having Min/Max specifications are guaranteed. Typical values are for information purposes only. Unless otherwise noted, all tests are at the specified temperature and are pulsed tests, therefore: TJ = TC = TA Electrical Specifications PARAMETER INPUT VIH IIH VIL IIL VHVS OUTPUT ROH ROL IPK IDC POWER SUPPLY IS VS TA = 25C, V = 15V unless otherwise specified DESCRIPTION TEST CONDITIONS MIN TYP MAX UNITS Logic "1" Input Voltage Logic "1" Input Current Logic "0" Input Voltage Logic "0" Input Current Input Hysteresis @0V @V+ 2.4 0.1 10 0.8 0.1 0.3 10 V A V A V Pull-Up Resistance Pull-Down Resistance Peak Output Current Continuous Output Current IOUT = -100mA IOUT = +100mA Source Sink Source/Sink 100 3 4 2 2 6 6 A mA Power Supply Current Operating Voltage Input High 4.5 2.5 5 16 mA V AC Electrical Specifications PARAMETER SWITCHING CHARACTERISTICS tR tF tD-ON tD-OFF Rise Time Fall Time Turn-On Delay Time Turn-Off Delay Time TA = 25C, V = 15V unless otherwise specified TEST CONDITIONS MIN TYP MAX UNITS DESCRIPTION CL = 500pF CL = 1000pF CL = 500pF CL = 1000pF 7.5 10 10 13 18 20 ns 20 ns 20 25 25 ns ns 2 EL7182 Timing Table Standard Test Configuration Simplified Schematic 3 EL7182 Typical Performance Curves Switch Threshold vs Supply Voltage Max Power/Derating Curves Input Current vs Voltage Peak Drive vs Supply Voltage Quiescent Supply Current "ON" Resistance vs Supply Voltage CASE: INPUT LEVEL CURVE GND V+ B D Average Supply Current vs Voltage and Frequency Average Supply Current vs Capacitive Load 4 EL7182 Typical Performance Curves (Continued) Rise/Fall Time vs Load Rise/Fall Time vs Supply Voltage Rise/Fall Time vs Temperature Propagation Delay vs Supply Delay Time vs Temperature All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems. Intersil Corporation's quality certifications can be viewed at www.intersil.com/design/quality Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see www.intersil.com 5 |
Price & Availability of EL7182
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |