 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| (R) ITA6V1U1 TRANSILTM ARRAY FOR DATALINE PROTECTION Application Specific Discretes A.S.D.TM APPLICATIONS Data transmission lines protection : - Unipolar signal up to 5.5V - Bipolar signal in the +/- 2.5V range FEATURES HIGH SURGE CAPABILITY TRANSIL ARRAY IPP = 40 A (8/20s) PEAK PULSE POWER : 300 W (8/20s) UP TO 6 UNIDIRECTIONAL TRANSIL FUNCTIONS LOW CLAMPING FACTOR (VCL / VBR) AT HIGH CURRENT LEVEL LOW LEAKAGE CURRENT ESD PROTECTION UP TO 15kV s s s s s s SO-8 FUNCTIONAL DIAGRAM DESCRIPTION Transil diode arrays provide high overvoltage protection by clamping action. Their instantaneous response to transient overvoltages makes them particularly suited to protect voltage sensitive devices such as MOS Technology and low voltage supplied IC's. The ITA series allies high surge capability against energetic pulses with high voltage performance against ESD. COMPLIES WITH THE FOLLOWING STANDARDS : IEC 1000-4-2 : level 4 IEC 1000-4-4 : level 4 IEC 1000-4-5 : level 2 MIL STD 883C - Method 3015-6 : class 3 (human body model) I/O1 I/O 2 I/O 3 I/O 4 1 2 3 4 8 I/O6 7 GND 6 GND 5 I/O 5 August 2001- Ed: 2 1/5 ITA6V1U1 ABSOLUTE MAXIMUM RATINGS (Tamb = 25C) Symbol PPP IPP I 2t Tstg Tj TL Parameter Peak pulse power dissipation (8/20s) (see note 1) Peak pulse current (8/20s) (see note 1) Wire I2t value (see note 1) Storage temperature range Maximum operating junction temperature Maximum lead temperature for soldering during 10s Tj initial = Tamb Tj initial = Tamb Value 300 40 0.6 - 55 to + 150 125 260 Unit W A A2s C C C Note 1 : For surges greater than the specified maximum value, the I/O will first present a short-circuit and after an open circuit caused by the wire melting. %I pp 100 8s Pulse wave form 8/20 s 50 0 20 s t ELECTRICAL CHARACTERISTICS (Tamb = 25C) Symbol VRM VBR VCL IRM IPP Parameter Stand-off voltage Breakdown voltage Clamping voltage Leakage current @ VRM Peak pulse current Voltage temperature coefficient Junction capacitance Forward voltage drop I PP V CL V BR V RM I IF VF I RM T C VF Types IRM max. @ VRM VBR min. note 2 @ IR VCL max. note 2 @ IPP VCL max. note 2 @ IPP T max. C max. note 3 VF @ max. IF 8/20 s 8/20 s A V 5 V 6.1 mA 1 V 10 A 10 V 12 A 25 10 /C 4 -4 pF 1500 V 1.3 A 1 ITA6V1U1 10 Note 2 : Between I/O pin and ground. Note 3 : Between I/O pin and ground, at 0V Bias. F = 1MHz. 2/5 ITA6V1U1 Fig. 1 : Typical peak pulse power versus exponential pulse duration. Ppp(W) 1000 T j initial = 25 o C Fig. 2 : Clamping voltage versus peak pulse current (exponential waveform 8/20 s). 100 tp (ms) expo 10 1E-3 1E-2 1E-1 1E+0 1E+1 Fig. 3 : Peak current IDC inducing open circuit of the wire for one input/output versus pulse duration (typical values). 1E+03 I DC (A) exponential waveform Fig. 4 : Junction capacitance versus reverse applied voltage for one input/output (typical values). 1E+02 1E+01 1E+00 1E-02 1E-01 1E+00 t (ms) 1E+01 Fig. 5 : Relative variation of leakage current versus junction temperature 3/5 ITA6V1U1 APPLICATION INFORMATION Typical application 1 : P I/O lines Typical application 2 : +/-2.5V Data lines ORDER CODE ITA Integrated Transil Array VBR min 6V1 U 1 RL Packaging: RL = Tape & reel = Tube Package: SO-8 Plastic Unidirectional 4/5 ITA6V1U1 MARKING TYPE ITA6V1U1 MARKING 6V1U1 Packaging : Preferred packaging is tape and reel. Weight : 0.08g. PACKAGE MECHANICAL DATA SO-8 (Plastic) DIMENSIONS REF. A a1 a2 b b1 C c1 D E e e3 F L M S Millimetres Min. 0.1 0.35 0.19 0.50 4.8 5.8 1.27 3.81 3.8 0.4 4.0 0.15 1.27 0.016 0.6 8 (max) 45 (typ) 5.0 0.189 6.2 0.228 0.050 0.150 0.157 0.050 0.024 Typ. Max. Min. 1.75 0.25 0.004 1.65 0.48 0.014 0.25 0.007 0.020 0.197 0.244 Inches Typ. Max. 0.069 0.010 0.065 0.019 0.010 Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics (c) 2001 STMicroelectronics - Printed in Italy - All rights reserved. STMicroelectronics GROUP OF COMPANIES Australia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan - Malaysia Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - U.S.A. http://www.st.com 5/5 |
Price & Availability of ITA6V1U1
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |