View M4T28-BR12SH1_171095.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

M4TXX-BR12SH
TIMEKEEPER SNAPHAT (Battery & Crystal)
s
Provides Battery Backup Power for Non-Volatile TIMEKEEPERs and Controllers in the SNAPHAT SOIC Package Removable Battery Avoids Heat Associated with Surface Mount Process Snaps Directly onto Surface-Mounted SNAPHAT SOIC Choice of Battery Capacities - M4T28-BR12SH = 48 mAh - M4T32-BR12SH = 120 mAh
SNAPHAT (SH) Battery & Crystal
s
s
s
s s
Keyed Insertion to Insure Proper Assembly Removable for Replacement and Proper Disposal Available in Tubes or Tape & Reel For Use with the 28 and 44 pin SOIC Versions of the TIMEKEEPER Product Families
s s
Figure 1. Logic Diagram
DESCRIPTION The M4Txx-BR12SH SNAPHAT top is a detachable lithium power source for ST's non-volatile TIMEKEEPER surface mount SOIC (MH) package (28 and 44 pin). The SNAPHAT top contains both the battery and crystal and is designed to be "snapped on" after the SOIC is surface mounted on the PC board. Thus the two piece solution avoids the battery and crystal from having to be exposed to the high temperatures of the surface mount process.
X1
X2
SNAPHAT
VBAT-
VBAT+
AI02528
November 1999
1/7
M4TXX-BR12SH
MECHANICAL INFORMATION Electrical connection to the SOIC is made through four pins that connect to the four press fitted sockets at each end of the SOIC. Critical contact points between the pins and sockets are gold-plated to resist oxidation. Internally, each socket contains six independent contact fingers to form redundant connections between the two components. These sockets were designed with high point contact force to provide the lowest possible contact resistance. The SNAPHAT top also incorporates four molded-in retaining clips which hold onto the ends of the SOIC insuring mechanical and electrical connection even under severe mechanical shock and vibration. The combined SOIC and SNAPHAT assembly can sustain shock levels in excess of 100 g without separating. This package also passes variable frequency testing in accordance with MIL-STD-883, method 2007.2, condition A. Figure 2 illustrates the affect of repeated insertion and extraction of the SNAPHAT top to the SOIC. The force required to extract the SNAPHAT, and then to re-insert it, reduces each time. After three or four extractions, though, the reduction starts to become unnoticeable, and the force required remains at a fairly constant figure. Typically, though, the SNAPHAT will only need to be extracted and re-inserted once in its lifetime. BATTERY CHARACTERISTICS Figure 3 illustrates the lithium coin cell discharge rate for a given load. This demonstrates the charFigure 2. SNAPHAT Insertion/Extraction Forces
20
Table 1. Description
Parameter Operating Temperature Storage Temperature Nominal Crystal Frequency Load Capacitance Nominal Battery Voltage Nominal Battery Capacity Battery Chemistry Value 1 = 0 to 70 C 6 = -40 to 85 C -40 to 85 C
32.768 kHz 12.5 pF 2.8 V 48 mAh 120 mAh Li(CF)x M4T28 M4T32
acteristically flat voltage level supplied by the battery until very near the end of its life. These discharge levels have been greatly accelerated in comparison to the normal, actual usage. UL RECOGNITION The M4Txx-BR12SH has been recognized by Underwriters Laboratories under their Component Recognition Program and carries U.L. File Number E89556.
7.5
5
Average Insertion Force Average Extraction Force
Force (pounds)
12.5
10
7.5
5
2.5 0 1 2 3 4 5 6 7 8 9 10
Number of Extractions
AI02526
2/7
M4TXX-BR12SH
Figure 3. Battery Discharge Rates
3.5 3.0 Voltage (V) 2.5 2.0 1.5 1.0 0
LOAD CHARACTERISTICS
Temp: 20C
15k
30k
100k
200 400 600 800 1000 1200 1400 1600 1800 2000 Duration (hrs.) (A)
3.5 3.0 Voltage (V) 2.5 2.0 1.5 1.0 0
LOAD CHARACTERISTICS
Temp: 20C
15k
30k
50k
100k
1000
2000
3000
4000
5000
6000
Duration (hrs.) (B)
AI02519
BATTERY LIFE For information on Data Retention Life and Battery Storage Life, please refer to the Application Note AN1012. GENERAL NOTES To remove the SNAPHAT top for replacement, a DIP/IC extractor tool should be used. Caution: To avoid draining battery do NOT place SNAPHAT pins in a conductive foam. Caution: To avoid damaging SNAPHAT sockets do NOT wave solder SOIC. For battery disposal information, see on the web at www.rayovac.com.
Figure 4. DIP Extractor Tool
AI02527
3/7
M4TXX-BR12SH
Table 2. Ordering Information Scheme
Example: Product Family M4T = SNAPHAT Battery & Crystal Battery Voltage & Capacity 28-BR12 = BR1225, 3 V, 48 mAh 32-BR12 = BR1632, 3 V, 120 mAh Package SH = SNAPHAT Temperature Range 1 = 0 to 70 C 6 = -40 to 85 C M4T28-BR12 SH 1
For further information on any aspect of this device, please contact the STMicroelectronics Sales Office nearest to you.
4/7
M4TXX-BR12SH
Table 3. M4T28-BR12SH - TIMEKEEPER 4-pin SNAPHAT Housing for 48 mAh Battery & Crystal, Package Mechanical Data
mm Symb Typ A A1 A2 A3 B D E eA eB L 0.46 21.21 14.22 15.55 3.20 2.03 6.73 6.48 Min Max 9.78 7.24 6.99 0.38 0.56 21.84 14.99 15.95 3.61 2.29 0.018 0.835 0.560 0.612 0.126 0.080 0.265 0.255 Typ Min Max 0.385 0.285 0.275 0.015 0.022 0.860 0.590 0.628 0.142 0.090 inches
Figure 5. M4T28-BR12SH - TIMEKEEPER 4-pin SNAPHAT Housing for 48 mAh Battery & Crystal, Package Outline
A1
A2 A A3
eA D
B eB
L
E
SHTK-A
Drawing is not to scale.
5/7
M4TXX-BR12SH
Table 4. M4T32-BR12SH - TIMEKEEPER 4-pin SNAPHAT Housing for 120 mAh Battery & Crystal, Package Mechanical Data
mm Symb Typ A A1 A2 A3 B D E eA eB L 0.46 21.21 17.27 15.55 3.20 2.03 8.00 7.24 Min Max 10.54 8.51 8.00 0.38 0.56 21.84 18.03 15.95 3.61 2.29 0.018 0.835 0.680 0.612 0.126 0.080 0.315 0.285 Typ Min Max 0.415 0.335 0.315 0.015 0.022 0.860 0.710 0.628 0.142 0.090 inches
Figure 6. M4T32-BR12SH - TIMEKEEPER 4-pin SNAPHAT Housing for 120 mAh Battery & Crystal, Package Outline
A1
A2 A A3
eA D
B eB
L
E
SHTK-A
Drawing is not to scale.
6/7
M4TXX-BR12SH
If you have any questions or suggestions concerning the matters raised in this document, please send them to the following electronic mail addresses:
apps.nvram@st.com ask.memory@st.com
(for application support) (for general enquiries)
Please remember to include your name, company, location, telephone number and fax number.
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is registered trademark of STMicroelectronics (R) 1999 STMicroelectronics - All Rights Reserved All other names are the property of their respective owners. STMicroelectronics GROUP OF COMPANIES Australia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom - U.S.A. http://www.st.com
7/7

▲Up To Search▲

Price & Availability of M4T28-BR12SH1

	To Download M4T28-BR12SH1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .