 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MOTOROLA SEMICONDUCTOR TECHNICAL DATA Order this document by MCR102/D Silicon Controlled Rectifiers Reverse Blocking Triode Thyristors Annular PNPN devices designed for low cost, high volume consumer applications such as relay and lamp drivers, small motor controls, gate drivers for larger thyristors, and sensing and detection circuits. Supplied in an inexpensive plastic TO-226AA package which is readily adaptable for use in automatic insertion equipment. * * * * Sensitive Gate Trigger Current -- 200 A Maximum Low Reverse and Forward Blocking Current -- 100 A Maximum, TC = 85C Low Holding Current -- 5 mA Maximum Passivated Surface for Reliability and Uniformity MCR102 MCR103 SCRs 0.8 AMPERES RMS 30 and 60 VOLTS G A K KG A CASE 29-04 (TO-226AA) STYLE 10 MAXIMUM RATINGS (TJ = 25C unless otherwise noted.) Rating Peak Repetitive Forward and Reverse Blocking Voltage(2) (TC = + 85C, RGK = 1 k) MCR102 MCR103 Forward Current RMS (See Figures 1 & 2) (All Conduction Angles) Peak Forward Surge Current, TA = 25C (1/2 Cycle, Sine Wave, 60 Hz) Circuit Fusing Considerations (t = 8.3 ms) Peak Gate Power -- Forward, TA = 25C Average Gate Power -- Forward, TA = 25C Peak Gate Current -- Forward, TA = 25C (300 s, 120 PPS) Peak Gate Voltage -- Reverse Operating Junction Temperature Range @ Rated VRRM and VDRM Storage Temperature Range Lead Solder Temperature (t 1/16I from case, 10 s max) Symbol VDRM VRRM IT(RMS) ITSM I2t PGM PGF(AV) IGFM VGRM TJ Tstg -- Value 30 60 0.8 10 0.415 0.1 0.01 1 4 -40 to +85 -40 to +150 + 230 Amps Amps A2s Watt Watt Amp Volts C C C Unit Volts 1. Temperature reference point for all case temperature is center of flat portion of package. (TC = +85C unless otherwise noted.) 2. VDRM and VRRM for all types can be applied on a continuous dc basis without incurring damage. Ratings apply for zero or negative gate voltage but positive gate voltage shall not be applied concurrently with a negative potential on the anode. When checking forward or reverse blocking capability, thyristor devices should not be tested with a constant current source in a manner that the voltage applied exceeds the rated blocking voltage. Motorola Thyristor Device Data (c) Motorola, Inc. 1995 1 MCR102 MCR103 THERMAL CHARACTERISTICS Characteristic Thermal Resistance, Junction to Case Thermal Resistance, Junction to Ambient Symbol RJC RJA Max 75 200 Unit C/W C/W ELECTRICAL CHARACTERISTICS (TC = 25C, RGK = 1000 unless otherwise specified.) Characteristic Peak Forward or Reverse Blocking Current (VAK = Rated VDRM or VRRM) Forward "On" Voltage(1) (ITM = 1 A Peak @ TA = 25C) Gate Trigger Current (Continuous dc)(2) (Anode Voltage = 7 Vdc, RL = 100 Ohms) Gate Trigger Voltage (Continuous dc) (Anode Voltage = 7 Vdc, RL = 100 Ohms) Holding Current (Anode Voltage = 7 Vdc, initiating current = 20 mA) TC = 25C TC = 25C TC = -65C TC = 85C TC = 25C TC = -65C TC = 25C TC = 85C VTM IGT VGT VGD IH Symbol IDRM, IRRM -- -- -- -- -- -- 0.1 -- -- 10 100 1.7 200 0.8 1.2 -- 5 10 Min Max Unit A A Volts A Volts mA 1. Forward current applied for 1 ms maximum duration, duty cycle 2. RGK current is not included in measurement. p 1%. FIGURE 1 - CURRENT DERATING (REFERENCE: CASE TEMPERATURE) 90 TC , MAXIMUM ALLOWABLE CASE TEMPERATURE ( C) = CONDUCTION ANGLE CASE MEASUREMENT POINT - CENTER OF FLAT PORTION FIGURE 2 - CURRENT DERATING (REFERENCE: AMBIENT TEMPERATURE) 90 TA, MAXIMUM ALLOWABLE AMBIENT TEMPERATURE ( C) = CONDUCTION ANGLE TYPICAL PRINTED CIRCUIT BOARD MOUNTING 70 70 dc 50 = 30 30 60 50 = 30 60 90 120 180 dc 90 120 180 30 10 0 0.1 0.2 0.3 0.4 0.5 IF(AV), AVERAGE FORWARD CURRENT (AMP) 10 0 0.1 0.2 0.3 0.4 IF(AV), AVERAGE FORWARD CURRENT (AMP) 2 Motorola Thyristor Device Data MCR102 MCR103 PACKAGE DIMENSIONS A R P SEATING PLANE B STYLE 10: PIN 1. CATHODE 2. GATE 3. ANODE F L K NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. DIMENSION F APPLIES BETWEEN P AND L. DIMENSION D AND J APPLY BETWEEN L AND K MINIMUM. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. DIM A B C D F G H J K L N P R V INCHES MIN MAX 0.175 0.205 0.170 0.210 0.125 0.165 0.016 0.022 0.016 0.019 0.045 0.055 0.095 0.105 0.015 0.020 0.500 --- 0.250 --- 0.080 0.105 --- 0.100 0.115 --- 0.135 --- MILLIMETERS MIN MAX 4.45 5.20 4.32 5.33 3.18 4.19 0.41 0.55 0.41 0.48 1.15 1.39 2.42 2.66 0.39 0.50 12.70 --- 6.35 --- 2.04 2.66 --- 2.54 2.93 --- 3.43 --- XX G H V 1 D J C SECTION X-X N N CASE 29-04 (TO-226AA) Motorola Thyristor Device Data 3 MCR102 MCR103 Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters can and do vary in different applications. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Literature Distribution Centers: USA: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. EUROPE: Motorola Ltd.; European Literature Centre; 88 Tanners Drive, Blakelands, Milton Keynes, MK14 5BP, England. JAPAN: Nippon Motorola Ltd.; 4-32-1, Nishi-Gotanda, Shinagawa-ku, Tokyo 141, Japan. ASIA PACIFIC: Motorola Semiconductors H.K. Ltd.; Silicon Harbour Center, No. 2 Dai King Street, Tai Po Industrial Estate, Tai Po, N.T., Hong Kong. 4 *MCR102/D* Motorola Thyristor Device Data MCR102/D |
Price & Availability of MCR103
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |