 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| RFG60P06E Data Sheet July 1999 File Number 3989.3 60A, 60V, 0.030 Ohm, ESD Rated, P-Channel Power MOSFET The RFG60P06E P-Channel power MOSFET is manufactured using the MegaFET process. This process, which uses feature sizes approaching those of LSI circuits gives optimum utilization of silicon, resulting in outstanding performance. They were designed for use in applications such as switching regulators, switching converters, motor drivers and relay drivers. These transistors can be operated directly from integrated circuits. The RFG60P06E incorporates ESD protection and is designed to withstand 2kV (Human Body Model) of ESD. Formerly developmental type TA09836. Features * 60A, 60V * rDS(ON) = 0.030 * Temperature Compensating PSPICE(R) Model * 2kV ESD Rated * Peak Current vs Pulse Width Curve * UIS Rating Curve * 175oC Operating Temperature * Related Literature Symbol D Ordering Information PART NUMBER RFG60P06E PACKAGE TO-247 BRAND RFG60P06E G NOTE: When ordering use the entire part numberr RFG60P06E. S Packaging JEDEC STYLE TO-247 SOURCE DRAIN GATE DRAIN (BOTTOM SIDE METAL) 4-154 CAUTION: These devices are sensitive to electrostatic discharge; follow proper ESD Handling Procedures. PSPICE(R) is a registered trademark of MicroSim Corporation. http://www.intersil.com or 407-727-9207 | Copyright (c) Intersil Corporation 1999. RFG60P06E Absolute Maximum Ratings TC = 25oC RFG60P06E -60 -60 20 60 Refer to Peak Current Curve Refer to UIS Curve 2 215 1.43 -55 to 175 300 260 UNITS V V V A Drain to Source Voltage (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VDSS Drain to Gate Voltage (Note 1). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VDGR Gate to Source Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VGS Continuous Drain Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ID Pulsed Drain Current (Note 3, Figure 5). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IDM Single Pulse Avalanche Rating (Note 4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EAS Electrostatic Discharge Rating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ESD MIL-STD-883, Category B(2) Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PD Derate Above 25oC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Operating and Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TJ, TSTG Maximum Temperature for Soldering Leads at 0.063in (1.6mm) from Case for 10s. . . . . . . . . . . . . . . . . . . . . . . . . . . . TL Package Body for 10s, See Techbrief 334 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Tpkg KV W W/oC oC oC oC CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. NOTE: 1. TJ = 25oC to 150oC. Electrical Specifications PARAMETER TC = 25oC, Unless Otherwise Specified SYMBOL BVDSS VGS(TH) IDSS TEST CONDITIONS ID = 250A, VGS = 0V VGS = VDS, ID = 250A VDS = -60V, VGS = 0V VGS = 20V ID = 60A, VGS = -10V VDD = -30V, ID = 30A, RL = 1.0, VGS = -10V, RGS = 2.5 TC = 25oC TC = 150oC MIN -60 -2 VGS = 0 to -20V VGS = 0 to -10V VGS = 0 to -2V VDS = -25V, VGS = 0V, f = 1MHz VDD = -48V, ID = 60A, RL = 0.8 TYP 20 60 65 20 7200 1700 325 MAX -4 -1 -50 100 0.030 125 125 450 225 15 0.70 80 UNITS V V A A nA W ns ns ns ns ns ns nC nC nC pF pF pF oC/W oC/W Drain to Source Breakdown Voltage Gate To Threshold Voltage Zero Gate Voltage Drain Current Gate to Source Leakage Current Drain to Source On Resistance Turn-On Time Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Turn-Off Time Total Gate Charge Gate Charge at -10V Threshold Gate Charge Input Capacitance Output Capacitance Reverse Transfer Capacitance Thermal Resistance Junction to Case Thermal Resistance Junction to Ambient IGSS rDS(ON) tON td(ON) tr td(OFF) tf tOFF Qg(TOT) Qg(-10) Qg(TH) CISS COSS CRSS RJC RJA Source to Drain Diode Specifications PARAMETER Source to Drain Diode Voltage Diode Reverse Recovery Time NOTES: 2. Pulse test: pulse width 300s maximum, duty cycle 2%. 3. Repetitive rating: pulse width limited by maximum junction temperature. See Transient Thermal Impedance curve (Figure 3). SYMBOL VSD trr TEST CONDITIONS ISD = 45A ISD = 45A, dISD/dt = 100A/s MIN TYP MAX 1.5 125 UNITS V ns 4-155 RFG60P06E Typical Performance Curves 1.2 POWER DISSIPATION MULTIPLIER 1.0 ID , DRAIN CURRENT (A) 0.8 0.6 0.4 0.2 0 0 25 50 75 100 125 TC , CASE TEMPERATURE (oC) 150 175 Unless Otherwise Specified -70 -60 -50 -40 -30 -20 -10 0 25 50 75 100 125 150 175 TC , CASE TEMPERATURE (oC) FIGURE 1. NORMALIZED POWER DISSIPATION vs CASE TEMPERATURE FIGURE 2. MAXIMUM CONTINUOUS DRAIN CURRENT vs CASE TEMPERATURE 1 ZJC, NORMALIZED THERMAL IMPEDANCE 0.5 0.2 0.1 0.1 0.05 0.02 0.01 t1 t2 NOTES: DUTY FACTOR: D = t1/t2 PEAK TJ = PDM x ZJC x RJC + TC 10-3 10-2 10-1 t , RECTANGULAR PULSE DURATION (s) 100 101 PDM SINGLE PULSE 0.01 10-5 10-4 FIGURE 3. NORMALIZED MAXIMUM TRANSIENT THERMAL IMPEDANCE -500 -103 VGS = -10V FOR TEMPERATURES ABOVE 25oC DERATE PEAK CURRENT CAPABILITY AS FOLLOWS: 175 - T C I = I 25 ----------------------- 150 TC = 25oC -100 100s 1ms -10 OPERATION IN THIS AREA MAY BE LIMITED BY rDS(ON) TC = 25oC -1 -1 10ms 100ms DC VDSS MAX = -60V -10 VDS , DRAIN TO SOURCE VOLTAGE (V) -60 IDM , PEAK CURRENT (A) ID , DRAIN CURRENT (A) -100 TRANSCONDUCTANCE MAY LIMIT CURRENT IN THIS REGION -50 10-5 10-4 10-3 10-2 10-1 100 101 t , PULSE WIDTH (ms) FIGURE 4. FORWARD BIAS SAFE OPERATING AREA FIGURE 5. PEAK CURRENT CAPABILITY 4-156 RFG60P06E Typical Performance Curves -200 IAS , AVALANCHE CURRENT (A) STARTING TJ = 25oC ID, DRAIN CURRENT (A) -90 VGS = -10V -60 VGS = -6V -30 VGS = -4.5V VGS = -5V PULSE DURATION = 80s DUTY CYCLE = 0.5% MAX TC = 25oC Unless Otherwise Specified (Continued) -120 VGS = -20V VGS = -8V VGS = -7V -100 STARTING TJ = 150oC If R = 0 tAV = (L) (IAS) / (1.3RATED BVDSS - VDD) If R 0 tAV = (L/R) ln [(IAS*R) / (1.3 RATED BVDSS - VDD) + 1] -10 0.01 0.1 1 tAV, TIME IN AVALANCHE (ms) 0 10 0 -2 -4 -6 -8 VDS , DRAIN TO SOURCE VOLTAGE (V) FIGURE 6. UNCLAMPED INDUCTIVE SWITCHING FIGURE 7. SATURATION CHARACTERISTICS ID(ON), ON STATE DRAIN CURRENT (A) -120 175oC 25oC NORMALIZED ON RESISTANCE VDD = -15V PULSE DURATION = 80s DUTY CYCLE = 0.5% MAX -55oC 2.0 PULSE DURATION = 80s DUTY CYCLE = 0.5% MAX VGS = -10V, ID = -60A 1.5 -90 -60 1.0 -30 0.5 0 0 0 -2 -4 -6 -8 -10 -80 -40 0 40 80 120 160 200 VGS , GATE TO SOURCE VOLTAGE (V) TJ , JUNCTION TEMPERATURE (oC) FIGURE 8. TRANSFER CHARACTERISTICS FIGURE 9. NORMALIZED DRAIN TO SOURCE ON RESISTANCE vs JUNCTION TEMPERATURE 2.0 VGS = VDS, ID = - 250A NORMALIZED DRAIN TO SOURCE BREAKDOWN VOLTAGE 2.0 ID = -250A NORMALIZED GATE THRESHOLD VOLTAGE 1.5 1.5 1.0 1.0 0.5 0.5 0 -80 -40 0 40 80 120 160 200 0 -80 -40 0 40 80 120 160 200 TJ , JUNCTION TEMPERATURE (oC) TJ , JUNCTION TEMPERATURE (oC) FIGURE 10. NORMALIZED GATE THRESHOLD VOLTAGE vs JUNCTION TEMPERATURE FIGURE 11. NORMALIZED DRAIN TO SOURCE BREAKDOWN VOLTAGE vs JUNCTION TEMPERATURE 4-157 RFG60P06E Typical Performance Curves 8000 VDS , DRAIN TO SOURCE VOLTAGE (V) VGS = 0V, f = 1MHz C, CAPACITANCE (pF) 6000 VGS = 0V, f = 1MHz CISS = CGS + CGD CRSS = CGD COSS CDS + CGS COSS CISS Unless Otherwise Specified (Continued) -60 VDD = BVDSS -10 VGS , GATE TO SOURCE VOLTAGE (V) VDD = BVDSS -45 RL = 1.0 IG(REF) = -4mA VGS = -10V -7.5 4000 -30 0.75 BVDSS -15 0.50 BVDSS 0.25 BVDSS 0.75 BVDSS 0.50 BVDSS 0.25 BVDSS -5.0 2000 -2.5 CRSS 0 0 -5 -10 -15 -20 -25 VDS , DRAIN TO SOURCE VOLTAGE (V) 0 20 IG(REF) IG(ACT) t, TIME (s) 80 IG(REF) IG(ACT) 0 FIGURE 12. CAPACITANCE vs DRAIN TO SOURCE VOLTAGE NOTE: Refer to Intersil Application Notes AN7254 and AN7260. FIGURE 13. NORMALIZED SWITCHING WAVEFORMS FOR CONSTANT GATE CURRENT Test Circuits and Waveforms VDS tAV L VARY tP TO OBTAIN REQUIRED PEAK IAS RG 0 + VDD 0V VGS DUT tP IAS 0.01 tP BVDSS VDD IAS VDS FIGURE 14. UNCLAMPED ENERGY TEST CIRCUIT FIGURE 15. UNCLAMPED ENERGY WAVEFORMS tON td(ON) tOFF td(OFF) tr 0 10% tf 10% VDS RL VGS VDD VGS RGS + VDS 0 90% 90% DUT 10% 50% VGS PULSE WIDTH 90% 50% FIGURE 16. SWITCHING TIME TEST CIRCUIT FIGURE 17. RESISTIVE SWITCHING WAVEFORMS 4-158 RFG60P06E Test Circuits and Waveforms VDS RL 0 VGS = -2V VGS VDD + (Continued) Qg(TH) VDS -VGS Qg(-10) VDD Qg(TOT) 0 IG(REF) VGS = -10V DUT Ig(REF) VGS = -20V FIGURE 18. GATE CHARGE TEST CIRCUIT FIGURE 19. GATE CHARGE WAVEFORMS 4-159 RFG60P06E PSPICE Electrical Model .SUBCKT RFG60P06E 2 1 3; REV 9/20/94 CA 12 8 1.01e-8 CB 15 14 1.05e-8 CIN 6 8 6.9e-9 DBODY 5 7 DBDMOD DBREAK 7 11 DBKMOD DPLCAP 10 6 DPLCAPMOD EBREAK 5 11 17 18 -76.35 EDS 14 8 5 8 1 EGS 13 8 6 8 1 ESG 5 10 8 6 1 EVTO 20 6 8 18 1 IT 8 17 1 LDRAIN 2 5 1e-9 LGATE 1 9 7.9e-9 LSOURCE 3 7 4.18e-9 12 DPLCAP 10 ESG - 8 6 5 + RDRAIN 16 EBREAK + 17 18 DRAIN LDRAIN 2 VTO + GATE 1 RGATE 9 20 EVTO 18 8 6 RIN MOS2 21 MOS1 11 DBREAK 8 RSOURCE - LGATE CIN + DBODY LSOURCE 7 3 S1A 13 8 S1B CA + 6 EGS 8 13 S2A 14 13 S2B CB + EDS 14 5 8 15 17 SOURCE 18 RBREAK MOS1 16 6 8 8 MOSMOD M=0.99 MOS2 16 21 8 8 MOSMOD M=0.01 RBREAK 17 18 RBKMOD 1 RDRAIN 5 16 RDSMOD 12.83e-3 RGATE 9 20 1.5 RIN 6 8 1e9 RSOURCE 8 7 RDSMOD 3.25e-3 RVTO 18 19 RVTOMOD 1 S1A 6 12 13 8 S1AMOD S1B 13 12 13 8 S1BMOD S2A 6 15 14 13 S2AMOD S2B 13 15 14 13 S2BMOD VBAT 8 19 DC 1 VTO 21 6 -0.83 RVTO IT 19 VBAT + - - .MODEL DBDMOD D (IS=1.24e-12 RS=4.72e-3 TRS1=1.43e-3 TRS2=-4.91e-7 CJO=6.98e-9 TT=1.5e-7) .MODEL DBKMOD D (RS=1.11e-1 TRS1=1.34e-3 TRS2=4.46e-12) .MODEL DPLCAPMOD D (CJO=15e-10 IS=1e-30 N=10) .MODEL MOSMOD PMOS (VTO=-3.71 KP=31.5 IS=1e-30 N=10 TOX=1 L=1u W=1u) .MODEL RBKMOD RES (TC1=9.42e-4 TC2=0) .MODEL RDSMOD RES (TC1=5.85e-3 TC2=7.69e-6) .MODEL RVTOMOD RES (TC1=-3.39e-3 TC2=1.07e-6) .MODEL S1AMOD VSWITCH (RON=1e-5 ROFF=0.1 VON=4.6 VOFF=2.6) .MODEL S1BMOD VSWITCH (RON=1e-5 ROFF=0.1 VON=2.6 VOFF=4.6) .MODEL S2AMOD VSWITCH (RON=1e-5 ROFF=0.1 VON=1.16 VOFF=-3.84) .MODEL S2BMOD VSWITCH (RON=1e-5 ROFF=0.1 VON=-3.84 VOFF=1.16) .ENDS NOTE: For further discussion of the PSPICE model, consult A New PSPICE Sub-Circuit for the Power MOSFET Featuring Global Temperature Options; written by William J. Hepp and C. Frank Wheatley. All Intersil semiconductor products are manufactured, assembled and tested under ISO9000 quality systems certification. Intersil semiconductor products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see web site http://www.intersil.com 4-160 |
Price & Availability of RFG60P06E
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |