View MAX6033_191328.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

19-2300; Rev 2; 6/03
Ultra-High-Precision SOT23 Series Voltage Reference
General Description
The MAX6033 ultra-high-precision series voltage reference features a low 7ppm/C (max) temperature coefficient and a low dropout voltage (200mV, max). Low temperature drift and low noise make the MAX6033 ideal for use with high-resolution ADCs or DACs. This device uses bandgap technology for low-noise performance and excellent accuracy. Laser-trimmed, highstability, thin-film resistors, and postpackage trimming guarantee excellent initial accuracy (0.04%, max). The MAX6033 consumes only 40A of supply current and sources up to 15mA. Series mode references save system power and use minimal external components compared to two-terminal shunt references. The MAX6033 is available in the miniature 6-pin SOT23 package and is offered over the automotive temperature range (-40C to +125C). o Tiny 6-Pin SOT23 Package o Ultra-Low Temperature Drift: 7ppm/C (max) o 0.04% Initial Accuracy o Stable with Capacitive Loads o Low 16VP-P Noise (0.1Hz to 10Hz) (2.5V Output) o 15mA Output Source Current o Low 200mV Dropout Voltage o Low 40A Quiescent Current o Wide 2.7V to 12.6V Supply Voltage o Excellent Load Regulation: 0.001mV/mA
Features
MAX6033
Ordering Information
PART MAX6033AAUT_ _-T MAX6033BAUT_ _-T MAX6033CAUT_ _-T TEMP RANGE -40C to +125C -40C to +125C -40C to +125C PIN-PACKAGE 6 SOT23-6 6 SOT23-6 6 SOT23-6
Applications
Precision Regulators A/D and D/A Converters Power Supplies Hard-Disk Drives High-Accuracy Industrial and Process Control Hand-Held Instruments
Note: Two-number part suffix indicates output voltage option. SOT23 Package Top Marks appear at end of data sheet.
Selector Guide
SUFFIX 25 30 41 50 VOLTAGE OUTPUT 2.500V 3.000V 4.096V 5.000V
Typical Operating Circuit
SUPPLY INPUT
Pin Configuration
TOP VIEW
IN
OUTS OUTF REFERENCE OUTPUT I.C.* 1 MAX6033 6 OUTS
0.1F* MAX6033 0.1F (min) GND I.C.* 3 GND 2
5
OUTF
4
IN
SOT23
*INPUT CAPACITOR IS OPTIONAL *I.C. = INTERNALLY CONNECTED: DO NOT USE
________________________________________________________________ Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at 1-888-629-4642, or visit Maxim's website at www.maxim-ic.com.
Ultra-High-Precision SOT23 Series Voltage Reference MAX6033
ABSOLUTE MAXIMUM RATINGS
IN to GND ...............................................................-0.3V to +13V OUTF, OUTS to GND................................................-0.3V to +6V Continuous Power Dissipation (TA = +70C) 6-Pin SOT23 (derate 9.1mW/C above +70C)............727mW Operating Temperature Range .........................-40C to +125C Storage Temperature Range .............................-65C to +150C Maximum Junction Temperature .....................................+150C Lead Temperature (soldering, 10s) .................................+300C
Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS--VOUT = 2.500V
(VIN = 5V, COUT = 0.1F, IOUT = 0, TA = TMIN to TMAX, unless otherwise specified. Typical values are at TA = +25C.) (Note 1)
PARAMETER Output Voltage SYMBOL VOUT TA = +25C CONDITIONS MAX6033A MAX6033B MAX6033C MAX6033A Output-Voltage Accuracy TA = +25C MAX6033B MAX6033C MAX6033A Output Voltage Temperature Coefficient TCVOUT MAX6033B MAX6033C Input Voltage Range Line Regulation Load Regulation VIN VOUT/ VIN VOUT/ IOUT VDO TA = -40oC to +85oC TA = -40oC to +125oC TA = -40oC to +85oC TA = -40 C to +125 C TA = -40oC to +85oC TA = -40oC to +125oC 2.7 3 0.001 0.02
o o o o
MIN 2.4990 2.4950 2.4975 -0.04 -0.2 -0.1
TYP 2.5000 2.5000 2.5000
MAX 2.5010 2.5050 2.5025 +0.04 +0.2 +0.1
UNITS V
%
1.5 2.5 3 7 6 10
7 10 10 15 20 40 12.6 25 50 0.05 0.1 0.2 0.4 0.5 60 75 85 A V mV/mA V/V V ppm/C
Inferred from line regulation specification 2.7V VIN 12.6V -100A IOUT 15mA TA = +25C TA = -40C to +125C TA = +25C TA = -40C to +125C TA = -40 C to +85 C TA = -40oC to +125oC
VOUT = 0.1%, IOUT = 1mA Dropout Voltage (Note 2) VOUT = 0.1%, IOUT = 10mA TA = +25oC Quiescent Supply Current IIN TA = -40 C to +85 C TA = -40oC to +125oC Output Short-Circuit Current Output-Voltage Noise Turn-On Settling Time Temperature Hysteresis Long-Term Stability ISC en tON VOUT = 0 VOUT = VIN 0.1Hz f 10Hz 10Hz f 1kHz VOUT settles to 0.01% of final value (Note 3) t = 1000hr
o o
0.3 40
90 -2 16 12 500 150 40 mA VP-P VRMS s ppm ppm
2
_______________________________________________________________________________________
Ultra-High-Precision SOT23 Series Voltage Reference
ELECTRICAL CHARACTERISTICS--VOUT = 3.000V
(VIN = 5V, COUT = 0.1F, IOUT = 0, TA = TMIN to TMAX, unless otherwise specified. Typical values are at TA = +25C.) (Note 1)
PARAMETER Output Voltage SYMBOL VOUT TA = +25oC CONDITIONS MAX6033A MAX6033B MAX6033C MAX6033A Output-Voltage Accuracy TA = +25oC MAX6033B MAX6033C MAX6033A Output-Voltage Temperature Coefficient TCVOUT MAX6033B MAX6033C Input Voltage Range Line Regulation Load Regulation Dropout Voltage (Note 2) VIN VOUT/ VIN VOUT/ IOUT VDO TA = -40oC to +85oC TA = -40oC to +125oC TA = -40oC to +85oC TA = -40 C to +125 C TA = -40oC to +85oC TA = -40oC to +125oC 3.2 4 0.002 0.02 0.2 40 TA = +25C TA = -40C to +125C TA = +25C TA = -40C to +125C IOUT = 1mA IOUT = 10mA
o o
MAX6033
MIN 2.9988 2.9940 2.9970 -0.04 -0.2 -0.1
TYP 3.0000 3.0000 3.0000
MAX 3.0012 3.0060 3.0030 +0.04 +0.2 +0.1
UNITS V
%
1.5 2.5 3 7 6 10
7 10 10 15 20 40 12.6 30 60 0.06 0.12 0.2 0.4 60 75 85 A V V/V mV/mA V ppm/C
Inferred from line regulation specification 3.2V VIN 12.6V -100A IOUT 15mA VOUT = 0.1% TA = +25C
Quiescent Supply Current
IIN
TA = -40C to +85C TA = -40C to +125C VOUT = 0 VOUT = VIN 0.1Hz f 10Hz 10Hz f 1kHz VOUT settles to 0.01% of final value (Note 3) t = 1000hr 90 -2 24 15 600 150 40
Output Short-Circuit Current Output-Voltage Noise Turn-On Settling Time Temperature Hysteresis Long-Term Stability
ISC en tON
mA VP-P VRMS s ppm ppm
ELECTRICAL CHARACTERISTICS--VOUT = 4.096V
(VIN = 5V, COUT = 0.1F, IOUT = 0, TA = TMIN to TMAX, unless otherwise specified. Typical values are at TA = +25C.) (Note 1)
PARAMETER Output Voltage SYMBOL VOUT TA = +25C CONDITIONS MAX6033A MAX6033B MAX6033C MAX6033A Output-Voltage Accuracy TA = +25C MAX6033B MAX6033C MIN 4.0943 4.0878 4.0919 -0.04 -0.2 -0.1 TYP 4.0960 4.0960 4.0960 MAX 4.0977 4.1042 4.1001 +0.04 +0.2 +0.1 % V UNITS
_______________________________________________________________________________________
3
Ultra-High-Precision SOT23 Series Voltage Reference MAX6033
ELECTRICAL CHARACTERISTICS--VOUT = 4.096V (continued)
(VIN = 5V, COUT = 0.1F, IOUT = 0, TA = TMIN to TMAX, unless otherwise specified. Typical values are at TA = +25C.) (Note 1)
PARAMETER SYMBOL MAX6033A Output-Voltage Temperature Coefficient TCVOUT MAX6033B MAX6033C Input-Voltage Range Line Regulation Load Regulation Dropout Voltage (Note 2) VIN VOUT/ VIN VOUT/ IOUT VDO CONDITIONS TA = -40oC to +85oC TA = -40oC to +125oC TA = -40oC to +85oC TA = -40oC to +125oC TA = -40oC to +85oC TA = -40oC to +125oC 4.3 6 0.002 0.02 0.2 40 TA = +25C TA = -40oC to +125oC TA = +25C TA = -40oC to +125oC IOUT = 1mA IOUT = 10mA MIN TYP 1.5 2.5 3 7 6 10 MAX 7 10 10 15 20 40 12.6 30 60 0.08 0.15 0.2 0.4 60 75 85 90 -2 32 22 800 150 40 A V V/V mV/mA V ppm/C UNITS
Inferred from line regulation specification 4.3V VIN 12.6V -100A IOUT 15mA VOUT = 0.1% TA = +25C
Quiescent Supply Current
IIN
TA = -40C to +85C TA = -40oC to +125oC VOUT = 0 VOUT = VIN 0.1Hz f 10Hz 10Hz f 1kHz VOUT settles to 0.01% of final value (Note 3) t = 1000hr
Output Short-Circuit Current Output-Voltage Noise Turn-On Settling Time Temperature Hysteresis Long-Term Stability
ISC en tON
mA VP-P VRMS s ppm ppm
ELECTRICAL CHARACTERISTICS--VOUT = 5.000V
(VIN = 5.5V, COUT = 0.1F, IOUT = 0, TA = TMIN to TMAX, unless otherwise specified. Typical values are at TA = +25C.) (Note 1)
PARAMETER Output Voltage SYMBOL VOUT TA = +25C CONDITIONS MAX6033A MAX6033B MAX6033C MAX6033A Output-Voltage Accuracy TA = +25C MAX6033B MAX6033C MAX6033A Output-Voltage Temperature Coefficient TCVOUT MAX6033B MAX6033C Input Voltage Range VIN TA = -40oC to +85oC TA = -40oC to +125oC TA = -40oC to +85oC TA = -40 C to +125 C TA = -40oC to +85oC TA = -40oC to +125oC 5.2
o o
MIN 4.9980 4.9900 4.9950 -0.04 -0.2 -0.1
TYP 5.000 5.000 5.000
MAX 5.0020 5.0100 5.0050 +0.04 +0.2 +0.1
UNITS V
%
1.5 2.5 3 7 6 10
7 10 10 15 20 40 12.6 V ppm/C
Inferred from line regulation specification
4
_______________________________________________________________________________________
Ultra-High-Precision SOT23 Series Voltage Reference
ELECTRICAL CHARACTERISTICS--VOUT = 5.000V (continued)
(VIN = 5.5V, COUT = 0.1F, IOUT = 0, TA = TMIN to TMAX, unless otherwise specified. Typical values are at TA = +25C.) (Note 1)
PARAMETER Line Regulation Load Regulation Dropout Voltage (Note 2) SYMBOL VOUT/ VIN VOUT/ IOUT VDO CONDITIONS 5.2V VIN 12.6V -100A IOUT 15mA VOUT = 0.1% TA = +25C Quiescent Supply Current IIN TA = -40C to +85C TA = -40 C to +125 C Output Short-Circuit Current Output-Voltage Noise Turn-On Settling Time Temperature Hysteresis Long-Term Stability ISC en tON VOUT = 0 VOUT = VIN 0.1Hz f 10Hz 10Hz f 1kHz VOUT settles to 0.01% of final value (Note 3) t = 1000hr 90 -2 40 26 1000 150 40
o o
MAX6033
MIN
TYP 7 0.003 0.02 0.2 40
MAX 50 100 0.1 0.2 0.2 0.4 60 75 85
UNITS V/V mV/mA V
TA = +25C TA = -40oC to +125oC TA = +25C TA = -40oC to +125oC IOUT = 1mA IOUT = 10mA
A
mA VP-P VRMS s ppm ppm
Note 1: MAX6033 is 100% production tested at TA = +25C and is guaranteed by design for TA = TMIN to TMAX as specified. Note 2: Dropout Voltage is the minimum input voltage at which VOUT changes 0.1% from VOUT at VIN = 5V (VIN = 5.5V for VOUT = 5V). Note 3: Temperature Hysteresis is defined as the change in +25C output voltage before and after cycling the device from TMAX to TMIN.
Typical Operating Characteristics
(VIN = 5V, COUT = 0.1F, IOUT = 0, TA = +25C, unless otherwise specified.) (Note 4)
OUTPUT VOLTAGE vs. TEMPERATURE (VOUT = 2.5V)
2.5010 2.5008 2.5006 2.5004 2.5002 2.5000 2.4998 2.4996 2.4994 2.4992 2.4990 2.4988 2.4986 2.4984 2.4982 2.4980 3 TYPICAL UNITS 5.0010 5.0008 5.0006 5.0004 5.0002 5.0000 4.9998 4.9996 4.9994 4.9992 4.9990 4.9988 4.9986 4.9984 4.9982 4.9980
MAX6033 toc01
OUTPUT VOLTAGE vs. TEMPERATURE (VOUT = 5V)
MAX6033 toc02
LOAD REGULATION (VOUT = 2.5V)
2.5035 2.5030 OUTPUT VOLTAGE (V) 2.5025 2.5020 2.5015 2.5010 2.5005 2.5000 2.4995 2.4990 TA = +25C TA = -40C TA = +85C TA = +125C
MAX6033 toc03
3 TYPICAL UNITS
2.5040
OUTPUT VOLTAGE (V)
OUTPUT VOLTAGE (V)
-40 -25 -10 5 20 35 50 65 80 95 110 125 TEMPERATURE (C)
-40 -25 -10 5 20 35 50 65 80 95 110 125 TEMPERATURE (C)
-2
0
2
4
6
8 10 12 14 16 18 20
OUTPUT CURRENT (mA)
_______________________________________________________________________________________
5
Ultra-High-Precision SOT23 Series Voltage Reference MAX6033
Typical Operating Characteristics (continued)
(VIN = 5V, COUT = 0.1F, IOUT = 0, TA = +25C, unless otherwise specified.) (Note 4)
LOAD REGULATION (VOUT = 5V)
MAX6033 toc04
DROPOUT VOLTAGE vs. OUTPUT CURRENT (VOUT = 2.5V)
600 DROPOUT VOLTAGE (mV) 500 400 300 200 100 0 TA = -40C 0 2 4 6 8 10 12 14 16 18 20 TA = +125C TA = +25C TA = +85C
MAX6033 toc05
DROPOUT VOLTAGE vs. OUTPUT CURRENT (VOUT = 5V)
MAX6033 toc06
5.006 TA = +125C 5.005 OUTPUT VOLTAGE (V) 5.004 5.003 5.002 5.001 5.000 4.999 4.998 -2 0 2 4 6 TA = +85C TA = -40C TA = +25C
700
600 550 DROPOUT VOLTAGE (mV) 500 450 400 350 300 250 200 150 100 50 0 0 2 4 6 8 TA = +85C TA = +25C TA = +125C
TA = -40C
8 10 12 14 16 18 20
10 12 14 16 18 20
OUTPUT CURRENT (mA)
OUTPUT CURRENT (mA)
OUTPUT CURRENT (mA)
POWER-SUPPLY REJECTION RATIO vs. FREQUENCY (VOUT = 2.5V)
MAX6033 toc07
POWER-SUPPLY REJECTION RATIO vs. FREQUENCY (VOUT = 5V)
-10 -20 -30 PSRR (dB) -40 -50 -60 -70 -80 -90
MAX6033 toc08
SUPPLY CURRENT vs. INPUT VOLTAGE (VOUT = 2.5V)
135 120 SUPPLY CURRENT (A) 105 90 75 60 45 30 15 0 TA = +25C TA = -40C TA = +85C TA = +125C
MAX6033 toc09
0 -10 -20 -30 PSRR (dB) -40 -50 -60 -70 -80 -90 -100 0.001 0.01 0.1 1 10 100
0
150
1000
-100 0.001
0.01
0.1
1
10
100
1000
0 1 2 3 4 5 6 7 8 9 10 11 12 13 INPUT VOLTAGE (V)
FREQUENCY (kHz)
FREQUENCY (kHz)
SUPPLY CURRENT vs. INPUT VOLTAGE (VOUT = 5V)
200 180 SUPPLY CURRENT (A) 160 140 120 100 80 60 40 20 0 TA = -40C TA = +25C TA = +125C TA = +85C
MAX6033 toc10
0.1Hz TO 10Hz OUTPUT NOISE (VOUT = 2.5V)
MAX6033 toc11
0.1Hz TO 10Hz OUTPUT NOISE (VOUT = 5V)
MAX6033 toc12
220
VOUT 4V/div
VOUT 10V/div
0 1 2 3 4 5 6 7 8 9 10 11 12 13 INPUT VOLTAGE (V)
1s/div
1s/div
6
_______________________________________________________________________________________
Ultra-High-Precision SOT23 Series Voltage Reference
Typical Operating Characteristics (continued)
(VIN = 5V, COUT = 0.1F, IOUT = 0, TA = +25C, unless otherwise specified.) (Note 4)
MAX6033
LOAD TRANSIENT (VOUT = 2.5V)
VIN = 5V COUT = 0.1F 2.5V
MAX6033 toc13
LOAD TRANSIENT (VOUT = 2.5V)
VIN = 5V COUT = 0.1F VOUT 50mV/div AC-COUPLED 2.5V
MAX6033 toc14
VOUT 50mV/div AC-COUPLED
1mA -100A 10mA 0 400s/div IOUT 10mA/div 1ms/div IOUT 1mA/div
LOAD TRANSIENT (VOUT = 2.5V)
VIN = 5V COUT = 10F
MAX6033 toc15
LOAD TRANSIENT (VOUT = 2.5V)
VIN = 5V COUT = 10F 2.5V
MAX6033 toc16
VOUT 20mV/div AC-COUPLED
2.5V
VOUT 50mV/div AC-COUPLED 1mA IOUT 1mA/div
10mA 0 400s/div IOUT 10mA/div
-100A
1ms/div
LINE TRANSIENT (VOUT = 2.5V)
MAX6033 toc17
LINE TRANSIENT (VOUT = 5V)
MAX6033 toc18
5.5V
COUT = 0.1F 6.5V VIN 500mV/div AC-COUPLED
COUT = 0.1F
4.5V
5.5V
VIN 500mV/div AC-COUPLED
2.5V
VOUT 10mV/div AC-COUPLED
5V
VOUT 10mV/div AC-COUPLED
400s/div
1ms/div
_______________________________________________________________________________________
7
Ultra-High-Precision SOT23 Series Voltage Reference MAX6033
Typical Operating Characteristics (continued)
(VIN = 5V, COUT = 0.1F, IOUT = 0, TA = +25C, unless otherwise specified.) (Note 4)
TURN-ON TRANSIENT (VOUT = 2.5V)
MAX6033 toc19
TURN-ON TRANSIENT (VOUT = 5V)
MAX6033 toc20
TURN-ON TRANSIENT (VOUT = 2.5V)
MAX6033 toc21
5V
5.5V VIN 2V/div 0 VOUT 1V/div
VIN 2V/div
5V VIN 2V/div 0
0 2.5V
5V
VOUT 2V/div
2.5V
VOUT 1V/div
0
COUT = 0.1F 100s/div
0 400s/div
COUT = 0.1F
0
COUT = 10F 2ms/div
TURN-ON TRANSIENT (VOUT = 5V)
MAX6033 toc22
LONG-TERM STABILITY vs. TIME (VOUT = 2.5V)
MAX6033 toc23
LONG-TERM STABILITY vs. TIME (VOUT = 5V)
5.0008 5.0007 5.0006 VOUT (V) 5.0005 5.0004 5.0003 5.0002 5.0001 5.0000 4.9999 5 TYPICAL UNITS
MAX6033 toc24
2.50040 VIN 2V/div 2.50035 2.50030 2.50025 5 TYPICAL UNITS
5.0009
5.5V
0 VOUT (V) VOUT 2V/div
2.50020 2.50015 2.50010 2.50005 2.50000
5V
0 COUT = 10F 2ms/div
2.49995 2.49990 0 100 200 300 400 500 600 700 800 900 1000 TIME (HOURS)
0 100 200 300 400 500 600 700 800 900 1000 TIME (HOURS)
Note 4: Many of the MAX6033 Typical Operating Characteristics are similar. The extremes of these characteristics are found in the MAX6033 (2.5V output) and the MAX6033 (5V output). The Typical Operating Characteristics of the remainder of the MAX6033 family typically lie between these two extremes and can be estimated based on their output voltages.
8
_______________________________________________________________________________________
Ultra-High-Precision SOT23 Series Voltage Reference
Pin Description
PIN 1, 3 2 4 NAME I.C. GND IN FUNCTION Internally Connected. Do not connect externally. Ground Positive Power-Supply Input Voltage Reference Force Output. Short OUTF to OUTS as close to the device as possible. Bypass OUTF with 0.1F (min) capacitor to GND. Voltage Reference Sense
GND OUTS IN MAX6033 OUTF ISOURCE
MAX6033
5
OUTF
Figure 1. Precision Current Source
6
OUTS
Applications Information
Bypassing/Load Capacitance
For the best line-transient performance, decouple the input with a 0.1F ceramic capacitor as shown in the Typical Operating Circuit. Place the capacitor as close to IN as possible. When transient performance is less important, no capacitor is necessary. The MAX6033 family requires a minimum output capacitance of 0.1F for stability and is stable with capacitive loads (including the bypass capacitance) of up to 100F. In applications where the load or the supply can experience step changes, a larger output capacitor reduces the amount of overshoot (undershoot) and improves the circuit's transient response. Place output capacitors as close to the device as possible.
IN MAX6033 OUT
3V SUPPLY
VDD MAX5143 DAC
REF
OUT
ANALOG OUTPUT
GND
GND
Figure 2. 14-Bit High-Resolution DAC and Positive Reference from a Single 3V Supply
Supply Current
The quiescent supply current of the MAX6033 series reference is typically 40A and is virtually independent of the supply voltage. In the MAX6033 family, the load current is drawn from the input only when required, so supply current is not wasted and efficiency is maximized at all input voltages. This improved efficiency reduces power dissipation and extends battery life. When the supply voltage is below the minimum-specified input voltage (as during turn-on), the devices can draw up to 150A beyond the nominal supply current. The input voltage source must be capable of providing this current to ensure reliable turn-on.
Turn-On Time
These devices typically turn on and settle to within 0.01% of their final value in >1s. The turn-on time can increase up to 2ms with the device operating at the minimum dropout voltage and the maximum load.
Precision Current Source
Figure 1 shows a typical circuit providing a precision current source. The OUTF output provides the bias current for the bipolar transistor. OUTS senses the voltage across the resistor and adjusts the current sourced by OUTF accordingly.
Output-Voltage Hysteresis
Output voltage hysteresis is the change in the output voltage at TA = +25C before and after the device is cycled over its entire operating temperature range. Hysteresis is caused by differential package stress appearing across the bandgap core transistors. The typical temperature hysteresis value is 150ppm.
High-Resolution DAC and Reference from Single Supply
Figure 2 shows a typical circuit providing both the power supply and reference for a high-resolution DAC. A MAX6033 with 2.5V output provides the reference voltage for the DAC.
_______________________________________________________________________________________
9
Ultra-High-Precision SOT23 Series Voltage Reference MAX6033
SOT23 Package Top Marks
PART MAX6033AAUT25 MAX6033AAUT30 MAX6033AAUT41 MAX6033AAUT50 MAX6033BAUT25 MAX6033BAUT30 MAX6033BAUT41 MAX6033BAUT50 MAX6033CAUT25 MAX6033CAUT30 MAX6033CAUT41 MAX6033CAUT50 TOP MARK ABDF ABDG ABDH ABDI AAXL AAXM AAXN AAXO AAXH AAXI AAXJ AAXK
Chip Information
TRANSISTOR COUNT: 656 PROCESS: BiCMOS
10
______________________________________________________________________________________
Ultra-High-Precision SOT23 Series Voltage Reference
Package Information
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information go to www.maxim-ic.com/packages.)
6LSOT.EPS
MAX6033
PACKAGE OUTLINE, SOT-23, 6L
21-0058
F
1
1
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 ____________________ 11 (c) 2003 Maxim Integrated Products Printed USA is a registered trademark of Maxim Integrated Products.

▲Up To Search▲

Price & Availability of MAX6033

	To Download MAX6033 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .