|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Micrel 5V/3.3V 155Mbps LASER DIODE DRIVER WITH OUTPUT ENABLE DESCRIPTION SY88822V SY88822V FEATURES s s s s s s Single 3.3V or 5V power supply Up to 155Mbps operation Modulation current to 30mA PECL output enable Differential PECL inputs Available in a tiny 10-pin (3mm) MSOP APPLICATIONS s 155Mbps SONET The SY88822V is a high speed current switch for driving a semiconductor laser diode in optical transmission applications. The modulation current (IOUT) is controlled by the current (IRSET) through the external resistor RSET. The output OUT is HIGH and no current flows through OUT when output enable is HIGH. The device incorporates complementary open collector outputs with a 30mA maximum current driving capability. The external resistor REXT must be placed between /OUT and VCC to dissipate the worst case power. RSER is recommended to compensate for laser diode matching issues. Pin 9 and pin 10 should be connected to achieve better performance. The SY88822V utilizes the high performance bipolar ASSETTM technology. FUNCTIONAL BLOCK DIAGRAM VCC REXT /OUT OUT RSER DIN /DIN Internal Logic to Laser Diode IMOD /EN 40X VCC GND GND VREF RSET RSET ASSET is a trademark of Micrel, Inc. Rev.: A Amendment: /0 1 Issue Date: March 2003 Micrel SY88822V PACKAGE/ORDERING INFORMATION Ordering Information /EN 1 DIN 2 /DIN 3 VREF 4 RSET 5 10 OUT 9 OUT 8 /OUT 7 GND 6 VCC Part Number SY88822VKC SY88822VKCTR* SY88822VKI SY88822VKITR* *Tape and Reel Package Type K10-1 K10-1 K10-1 K10-1 Operating Range Commercial Commercial Industrial Industrial Package Marking 822V 822V 822V 822V 10-Pin MSOP (K10-1) PIN DESCRIPTION Pin Number 1 2, 3 4 5 6 7 8, 9, 10 Pin Name /EN DIN, /DIN VREF RSET VCC GND /OUT, OUT Pin Function 100k PECL compatible input w/ 75k pulldown resistor. Modulation current goes to zero when deasserted high. Differential 100k PECL compatible input w/ 75k pulldown resistors. Voltage reference for use with RSET. An external resistor from here to VREF sets the reference current for IOUT. Positive power supply. Device ground. Differential open collector current outputs. TRUTH TABLE(Note1) D L H X /D H L X /EN L L H OUT (Note 2) H L H /OUT L H L Note 1. L = LOW, H = HIGH, X = don't care. Note 2. H = IOUT = 0mA. 2 Micrel SY88822V Absolute Maximum Ratings(Note 1) Power Supply Voltage (VCC) ............................ 0V to +7.0V Input Voltage (VIN) .............................................. 0V to VCC Output Current (IOUT) ................................................. 30mA Power Dissipation (PD) ........................................... 250mW Storage Temperature Range (TS) ............ -55C to +125C Operating Ratings(Notes 2, 3, 4) Supply Voltage (VIN) ................................... +3.0V to +3.6V ........................................................ or +4.5V to +5.5V Ambient Temperature (TA), Note 5 ............ -40C to +85C Junction Temperature (TJ), Note 5 ............ -40C to 100C Resistor to Dissipate Power (REXT) .................. 10 to 50 Laser Diode Serial Resistor (RSER) .................... 0 to 50 Resistor to Adjust Current (RSET), Note 6 ......................................................... 700 to 20,000 Package Thermal Resistance MSOP (JA) Still-Air ...................................................... 113C/W (JB) Still-Air ........................................................ 74C/W Note 1. Permanent device damage may occur if ABSOLUTE MAXIMUM RATINGS are exceeded. This is a stress rating only and functional operation is not implied at conditions other than those detailed in the operational sections of this data sheet. Exposure to ABSOLUTE MAXIMUM RATlNG conditions for extended periods may affect device reliability. The data sheet limits are not guaranteed if the device is operated beyond the operating ratings. The device is guaranteed to meet the DC specifications, shown in the table above, after thermal equilibrium has been established. The device is tested in a socket such that transverse airflow of 500lfpm is maintained. The voltage drop across REXT and RSER plus Laser Diode must not be greater than 1.4V. Commercial devices are guaranteed from 0C to +85C ambient temperature. RSET minimum 430. Note 2. Note 3. Note 4. Note 5. Note 6. DC ELECTRICAL CHARACTERISTICS(Note 1) GND = 0V; VCC = 3.3V 10% or VCC = 5.0V 10%; TA = -40C to +85C Symbol VIH VIL VREF IIL IIH ICC IOUT_OFF IOUT ARSET VOUT COUT Note 1. Parameter Input HIGH Voltage (DIN, /DIN, /EN) Input LOW Voltage (DIN, /DIN, /EN) Reference Voltage Input LOW Current (DIN, /DIN, /EN) Input HIGH Current (DIN, /DIN, /EN) Supply Current Output LOW Current (/EN = HIGH) Modulation Current IOUT/IRSET Voltage at OUT, /OUT Capacitance on OUT, /OUT Specification for packaged product only. Condition Min VCC-1.165 VCC-1.810 1.7 Typ Max VCC-0.880 VCC-1.475 Units V V V A 2.0 2.3 VI = VIL(min) 0.5 100 A mA A mA -- V pF IMOD = 25mA 450 25 1000 30 30 VCC-1.4 2.5 38 44 VCC 3 Micrel SY88822V AC ELECTRICAL CHARACTERISTICS(Note 1, 2) IMOD =10mA; GND = 0V; VCC = 3.3V 10% or VCC = 5.0V 10%; TA = -40C to +85C Symbol tPHL, tPLH D Parameter Propagation Delay DIN - OUT Condition IOUT = 10mA IOUT = 10mA Min Typ Max 1000 1000 1000 IOUT = 5 to 30mA 10 Units ps ps ps % tPHL, tPLH EN Propagation Delay /EN - OUT tr, tf IOR Note 1. Note 1. Rise/Fall Time (20% to 80%) Output Current Ringing Specification for packaged product only. REXT = RSER = 25 1%; RSER connected directly to VCC. TYPICAL OPERATING CHARACTERISTICS IMOD vs. RSET 40 30 IMOD (mA) VCC = 5.0V 20 10 VCC = 3.3V 0 0.0 1.0 2.0 3.0 RSET (k) 4.0 5.0 4 Micrel SY88822V 10 LEAD MSOP (K10-1) Rev. 00 MICREL, INC. TEL 1849 FORTUNE DRIVE SAN JOSE, CA 95131 FAX USA + 1 (408) 944-0800 + 1 (408) 944-0970 WEB http://www.micrel.com The information furnished by Micrel in this datasheet is believed to be accurate and reliable. However, no responsibility is assumed by Micrel for its use. Micrel reserves the right to change circuitry and specifications at any time without notification to the customer. Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser's use or sale of Micrel Products for use in life support appliances, devices or systems is at Purchaser's own risk and Purchaser agrees to fully indemnify Micrel for any damages resulting from such use or sale. (c) 2003 Micrel, Incorporated. 5 |
Price & Availability of SY88822V |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |