 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Crystal oscillator SOJ HIGH-FREQUENCY CRYSTAL OSCILLATOR SG-615 series Product number (Please refer to P1) Q33 6 1 5 x x x x x x x 0 0 * High-density mounting-type SMD. * A general-purpose SMD with heat-resisting cylindrical AT-cut crystal unit and allowing almost the same soldering temperature as SMD IC. * Cylindrical AT crystal unit builtin, thus assuring high reliability. * Low current consumption by output enable function(OE) or standby function(ST). Actual size Specifications (characteristics) Item Output frequency range Power source voltage Temperature range Max. supply voltage Operating voltage Storage temperature Operating temperature Symbol f0 VDD-GND VDD TSTG TOPR f/f0 Iop IOE tw/t VOH VOL CL N VIH VIL tTLH tTHL tOSC fa S.R. Specifications SG-615P SG-615PTJ SG-615PH Remarks 1.0250 MHz to 26.0000 MHz 26.0001 MHz to 66.6667 MHz Refer to page 31. "Frequency range" Frequency stability Current consumption Output disable current Duty Output voltage Output load condition (fan out) Output enable/disable input voltage Output rise time Output fall time Oscillation start up time Aging Shock resistance Note: -0.3 V to +7.0 V 5.0 V0.5 V -55 C to +125 C -20 C to +70 C (-40 C to +85 C) B: 50 x 10-6 C: 100 x 10-6 23 mA Max. 35 mA Max. 12 mA Max. 28 mA Max. 20 mA Max. 40 % to 60 % -- 40 % to 60 % 45 % to 55 % -- VDD -0.4 V Min. 2.4 V Min. VDD -0.4 V Min. 0.4 V Max. 50 pF Max. -- 50 pF Max. 10 TTL Max. 5 TTL Max. -- 2.0 V Min. 3.5 V Min. 2.0 V Min. 0.8 V Max. 1.5 V Max. 0.8 V Max. -- 7 ns Max. 8 ns Max. 5 ns Max. -- 7 ns Max. -- 8 ns Max. -- 5 ns Max. Stored as bare product after unpacking Refer to page 31. "Frequency range" B type is possible up to 55 MHz No load condition OE=GND CMOS load: 1/2VDD TTL load: 1.4 V IOH = -400 A (P,PTJ) /-4 mA (PH) IOL = 16 mA (P) /8mA (PTJ) /4 mA (PH) _ CL<15 pF IIH=1 A Max.(OE=VDD) IIL=-100 A Min.(OE=GND) , PTJ : IIL=-500 A Min.(OE=GND) CMOS load: 20 %80 % VDD TTL load: 0.4 V2.4 V CMOS load: 80 %20 % VDD TTL load: 2.4 V0.4 V Time at 4.5 V to be 0 s Ta= +25 C, VDD = 5 V, first year 4 ms Max. 10 ms Max. 5 x 10-6/year Max. 20 x 10-6 Max. Three drops on a hard board from 750 mm or excitation test with 29400 m/s2 x 0.3 ms x 1/2sine wave in 3 directions * Unless otherwise stated, characteristics (specifications) shown in the above table are based on the rated operating temperature and voltage condition. * External by-pass capacitor is recommended. (Unit: mm) #3 External dimensions #4 Recommended soldering pattern (Unit: mm) 1.3 SG-615P C 20.0000M E 9352A #1 #2 14.0 Max. NO. 9.8 Max. 1 2 3 4 8.65 Pin terminal OE or ST GND OUT VDD 4.7 Max. 4.06 0.25 0.51 5.08 0.25 Min. 7.62 Note. OE Pin (P, PTJ, PH, PTW, PHW, PCW, PCN) OE pin - "H" or "open" : Specified frequency output. OE pin - "L" : Output is high impedance. 8.8 ST pin (STW, SHW, SCW) ST pin - "H" or "open" : Specified frequency output. ST pin - "L" : Output is low level (weak pull - down), oscillation stops. 5.08 43 3.0 Crystal oscillator Specifications (characteristics) Item Symbol Specifications Output frequency range fO Max. supply voltage VDD-GND Power source Operating voltage VDD voltage Storage temperature TSTG Temperature Operating temperature TOPR range Frequency stability Current consumption Output disable current Standby current Duty Output voltage Output load condition (fan out) Output enable disable input voltage Output rise time Output fall time Oscillation start up time Aging Shock resistance f/f0 IOP IOE IST tw/t VOH VOL CL VIH VIL tTLH tTHL tOSC fa S.R. SG-615PCG SG-615SCG SG-615PCN 26.0001 MHz to 66.6667 MHz 1.5000 MHz to 26.0000 MHz -0.5 V to +7.0 V 2.7 V to 3.6 V 3.0 V to 3.6 V -55 C to +125 C -40 C to +85 C B : 50 x 10-6 C : 100 x 10-6 M : 100 x 10-6 12 mA Max. 30 mA Max. 10 mA Max. -- 15 mA Max. -- 50 A Max. -- 45 % to 55 % VDD -0.4 V Min. 2.2 V Min. 0.4 V Max. 0.4 V Max. 25 pF 15 pF 70 % VDD Min. 70 % VDD Min. 20 % VDD Max. 30 % VDD Max. 4.0 ns Max. 7 ns 4.0 ns Max. 7 ns 12 ms Max. 10 mS Max. 5 x 10-6 / year Max. 20 x 10-6 Max. Remarks Refer to page 31. "Frequency range" Stored as bare product after unpacking Refer to page 31. "Frequency range" -20 C to +70 C -40 C to +85 C No load condition OE=GND (PCG/PCN) ST=GND (SCG) 50 % VDD, CL = Max. IOH = -8 mA IOL = 8 mA OE, ST OE, ST 20 % to 80 % VDD, CL Max. 80 % to 20 % VDD CL Max. Time at minimum operating voltage to be 0 s Ta=+25 C, VDD =3.3 V First year Three drops on a hard board from 750 mm or excitation test with 29400 m/s2 x 0.3 ms x 1/2 sine wave in 3 directions Specifications (characteristics) Item Symbol Specifications Output frequency range fO Max. supply voltage Power source VDD-GND Operating voltage voltage VDD Storage temperature TSTG Temperature Operating temperature TOPR range Frequency stability Current consumption Output disable current Standby current f/f0 IOP IOE IST Duty tw/t Output voltage VOH VOL Output load condition (fan out) CL Output enable disable input voltage VIH VIL Output rise time tTLH Output fall time tTHL Oscillation start up time Aging Shock resistance tOSC fa S.R. SG-615PTW/STW SG-615PHW/SHW 55.0001 MHz to 135.0000 MHz -0.5 V to +7.0 V 5.0 V 0.5 V -55 C to +100 C -20 C to +70 C B : 50 x 10-6 C : 100 x 10-6 -- 45 mA Max. 30 mA Max. 50 A Max. 40 % to 60 % -- 45 % to 55 % -- -- 40 % to 60 % -- 45 % to 55% -- -- VDD -0.4 V Min. 0.4 V Max. 15 pF -- 5 TTL + 15 pF -- 25 pF -- -- 15 pF -- 25 pF -- 50 pF -- -- 2.0 V Min. 0.8 V Max. 2.0 ns Max. -- 4.0 ns Max. -- -- 3.0 ns Max. -- -- -- 4.0ns Max. 2.0 ns Max. -- 4.0 ns Max. -- -- 3.0 ns Max. -- -- -- 4.0ns Max. 10 ms Max. 5 x 10-6 /year Max. 20 x 10-6 Max. SG-615PCW/SCW 26.0001 MHz to 135.0000 MHz 3.3 V 0.3 V -40 C to +85 C M : 100 x 10-6 28 mA Max. 16 mA Max. -- -- 40 % to 60 % -- 45 % to 55% Remarks Refer to page 31. "Frequency range" Stored as bare product after unpacking Refer to page 31. "Frequency range" -20 C to +70 C -40 C to +80 C No load condition OE=GND(PW) ST=GND(SW) TTL load : 1.4 V, CL = Max. TTL load : 1.4 V, 5TTL + 15 pF, fo 66.6667 MHz CMOS load : 50% VDD, CL = Max. CMOS load : 50% VDD, CL = 25 pF, fo 66.6667 MHz CMOS load : 50% VDD, CL = 25 pF, fo 40.0 MHz IOH= -16 mA (TW/HW)/-8 mA(CW) IOL= 16 mA (TW/HW)/8 mA(CW) fo 135 MHz fo 90 MHz fo 66.6667 MHz fo 135 MHz fo 125 MHz fo 66.6667MHz fo 40.0 MHz OE,ST OE,ST TTL load: 0.8 V2.0 V, CL = Max. TTL load: 0.4 V2.4 V, CL = Max. CMOS load: 20 %80 % VDD, CL= 25 pF CMOS load: 20 %80 % VDD, CL= 15 pF CMOS load: 20 %80 % VDD, CL= Max. TTL load: 2.0 V0.8 V, CL = Max. TTL load: 2.4 V0.4 V, CL = Max. CMOS load: 80 %20 % VDD, CL= 25 pF CMOS load: 80 %20 % VDD, CL= 15 pF CMOS load: 80 %20 % VDD, CL= Max. Time at minimum operating voltage to be 0 s Ta=+25 C, VDD =5.0 V / 3.3 V, First year Three drops on a hard board from 750 mm or excitation test with 29400 m/s2 x 0.3 ms x 1/2 sine wave in 3 directions -- -- -- 15 pF -- -- 30 pF 0.7 VDD Min. 0.2 VDD Max. -- -- -- 3.0 ns Max. 4.0ns Max. -- -- -- 3.0 ns Max. 4.0ns Max. 44 |
Price & Availability of SG-615
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |