View MC3503_224223.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

(R)
MC3303 MC3403 - MC3503
LOW POWER QUAD BIPOLAR OPERATIONAL AMPLIFIERS
.SHORT.CLASS .SI .DUAL .LOW .I .SI
CIRCUIT PROTECTED OUTPUTS AB OUTPUT STAGE FOR MINIMAL CROSSOVER DISTORTION NGLE SUPPLY OPERATION : + 3 V TO + 36V SUPPLIES : 1.5V TO 18V INPUT BIAS CURRENT : 500nA MAX NTERNALLY COMPENSATED MILAR PERFORMANCE TO POPULAR UA741
N DIP14 (Plastic Package)
D SO14 (Plastic Micropackage)
DESCRIPTION The MC3403 is a low-cost, quad operational amplifier with true differential inputs. The device has electrical characteristics similar to the popular UA741. However the MC3403, has several distinct advantages over standard operational amplifier types in single supply applications. The quad amplifier can operate at supply voltages as low as 3.0 volts or as high as 36 volts with quiescent currents about one third of those associated with the UA741 (on a per amplifier basis). The common-mode input range includes the negative supply, thereby eliminating the necessity for external biasing components in many applications. PIN CONNECTIONS (top view)
P TSSOP14 (Thin Shrink Small Outline Package)
ORDER CODES
Part Number MC3303 MC3403 MC3503 Temperature Range -40 C, +105 C 0oC, +70oC -55oC, +125oC
o o
Package N * * * D * * * P * * *
Example : MC3403N
Output 1 1 Inverting Input 1 2 Non-inverting Input 1 3 VCC + 4 Non-inverting Input 2 5 Inverting Input 2 6 Output 2 7 + + + +
14 Output 4 13 Inverting Input 4 12 Non-inverting Input 4 11 VCC 10 Non-inverting Input 3 9 8 Inverting Input 3 Output 3
August 1998
1/11
MC3303 - MC3403 - MC3503
SCHEMATIC DIAGRAM (each amplifier)
Output V (1 stage) Q20 Q19 Q18 Q17 Q16 Q27
CC
Q23 C1 8pF R4 31k Q28 Q1 Q15 Non-inverting input Q22 Q24 Q9 Inverting input R2 37 k Q12 Q21 Q25 Q11 Q6 Q30 R6 0.7k Q13 R3 25 Q29
Q2 Q3 Q4
Q5 Q14
Q7 Q10 Q8
R5 8.2k
R1 12k
V
CC
(Ground)
SINGLE SUPPLY
+3V to +30V V CC
DUAL SUPPLIES
V CC
1.5V to 18V
1.5V to 18V
V CC
V CC
ABSOLUTE MAXIMUM RATINGS
Symbol VCC Vid Vi - Ptot Toper Tstg
Notes :
Parameter Supply Voltage Differential Input Voltage Input Voltage (note 1) Output Short-circuit Duration (note 2) Power Dissipation Operating Free-air Temperature Range Storage Temperature Range
MC3503 18 or 36 36 18 500 -55 to +125 -65 to +150
MC3403 18 or 36 36 18 Infinite 500 0 to +70 -65 to +150
MC3303 18 or 36 36 18 500 -40 to +105 -65 to +150
Unit V V V - mW
o o
C C
1. For supply voltages less than 15V, the absolute maximum input voltage is equal to the supply voltage. 2. Any of the amplifier outputs can be shorted to ground indefinitely ; however more than one should not be simultaneously shorted as the maximum junction temperature will be exceeded.
2/11
MC3303 - MC3403 - MC3503
ELECTRICAL CHARACTERISTICS VCC = 15V, Tamb = +25oC, (unless otherwise specified)
Symbol VIO Parameter Input Offset Voltage (RS 10k) Tamb = 25oC Tmin. Tamb Tmax. Input Offset Current o Tamb = 25 C Tmin. Tamb Tmax. Input Bias Current Tamb = 25oC Tmin. Tamb Tmax. Large Signal Voltage Gain (VO = 10V, RL = 2k) o Tamb = 25 C Tmin. Tamb Tmax. Supply Voltage Rejection Ratio (RS 10k) Tamb = 25oC Tmin. Tamb Tmax. Supply Current, all Amp, no Load Tamb = 25oC Tmin. Tamb Tmax. Vicm Input Common Mode Voltage Range Tamb = 25oC Tmin. Tamb Tmax. Common Mode Rejection Ratio (RS 10k) Tamb = 25oC Tmin. Tamb Tmax. Output Short-circuit Current Output Voltage Swing o Tamb = 25 C Tmin. Tamb Tmax. SR tr, tf KOV ZI ZO Bom B GBP THD en Slew Rate (VI = 10V RL = 2k, CL = 100pF, o Tamb = 25 C, unity gain) Rise Time and Fall Time (VO = 20mV, RL = 2k, CL = 100pF Tamb = 25oC, unity gain) Overshoot (VI = 20mV, RL = 2k, CL = 100pF, o Tamb = 25 C, unity gain) Input Impedance Output Impedance Power Bandwidth (RL = 2k, CL = 100pF, Av = 1, Tamb = 25oC, VO = 2Vpp, THD 5%) Unity Gain Bandwidth (VO = 10mV, RL = 2k, CL = 100pF, Tamb = 25oC, unity gain) Gain Bandwidth Product (VO = 10mV, RL = 2k, CL = 100pF, o f = 100kHz, Tamb = 25 C) Total Harmonic Distortion (f = 1kHz, Av = 20dB, RL = 2k, VO = 2Vpp, CL = 100pF, Tamb = 25oC) Equivalent Input Noise Voltage (f = 1kHz, Rs = 100) 0.7 0.3 RL RL RL RL = = = = 10k 2k 2k 10k MC3503 MC3503 - 15 - 15 70 70 10 12 10 10 12 0.35 90 30 13.5 13 45 mA V 50 25 77 77 MC3303 - MC3403 MC3503 Min. Typ. 1 Max. mV 5 6 nA 2 50 200 nA 40 500 800 V/mV 200 dB 90 mA 2.8 7 4 8 5 V + 13 + 13 dB Unit
IIO
Iib
Avd
SVR
ICC
CMR
IOS Vopp
V/s 0.5 0.18 10 1 75 9 MHz 1 MHz 1 % 0.02 43 nV Hz M kHz s %
3/11
MC3303 - MC3403 - MC3503
ELECTRICAL CHARACTERISTICS (continued)
Symbol m DVIO DIIO VO1/V02 Phase Margin Input Offset Voltage Drift Tmin. Tamb Tmax. Input Offset Current Drift Tmin. Tamb 25oC Channel Separation Parameter MC3303 - MC3403 - MC3503 Min. Typ. 60 10 50 120 dB Max. Unit Degrees V/ C
o pA/ C o
ELECTRICAL CHARACTERISTICS VCC+ = 5V, VCC- = Ground, Tamb = 25oC (unless otherwise specified)
Symbol VIO Parameter Input Offset Voltage (RS 10k) Tamb = 25 C Tmin Tamb Tmax Input Offset Current Tamb = 25oC Tmin. Tamb Tmax. Input Bias Current Tamb = 25oC Tmin. Tamb Tmax. Large Signal Voltage Gain (VO = 1.4 to 2.4V, RL = 2k) Tamb = 25oC Tmin. Tamb Tmax. Supply Voltage Rejection Ratio (RS 10k) o Tamb = 25 C Tmin. Tamb Tmax. Supply Current (All Amp) MC3503 Vopp Output Voltage Range (RL = 10k) VCC = +5V +5 < VCC +30V 3.3 VCC+-2V 3.5 VCC+-1.7V 10 5 77 77 MC3303 - MC3403 - MC3503 Min. Typ. 1 Max. 5 6 nA 2 50 200 nA 40 500 800 V/mV 200 dB 90 2.5 7 4 mA V Unit mV
IIO
Iib
Avd
SVR
ICC
4/11
MC3303 - MC3403 - MC3503
CIRCUIT DESCRIPTION The MC3403 is made using four internally compensated, two-stage operational amplifiers. The first stage of each consists of differential input devices Q24 and Q22 with input buffer transistors Q25 and Q21 and the differential to single ended converter Q3 and Q4. The first stage performs not only the first stage gain function but also performs the level shifting and transconductance reduction functions. By reducing the transconductance a smaller compensation capacitor (only 8pF) can be employed, thus saving chip area. The transconductance reduction is accomplished by splitting the collectors of Q24 and Q22. Another feature of this input stage is that the input commonmode range can include the negative supply of TYPICAL PERFORMANCE CURVES ground, in single supply operation, without saturation either the input devices or the differential to single-ended converter. The second stage consists of a standard current source load amplifier stage. The output stage is unique because it allows the output to swing to ground in single supply operation and yet does not exhibit any crossover distortion in split supply operations. This is possible because class AB operation is utilized. Each amplifier is biased from an internal voltage regulator which has a low temperature coefficient thus giving each amplifier good temperature characteristics as well as excellent power supply rejection.
20s/div.
AV = 100
APPLICATION INFORMATION VOLTAGE REFERENCE
V CC R2 10k
WIEN BRIDGE OSCILLATOR
50k
V CC
10k
5k V CC
1/4 MC3403
VO
V(ref) 1/4 MC3403 V(ref) = 1 V CC 2 VO fO = For R R C C 1 2 RC f O = 1kHz R = 16k C = 0.01F
R1 10k VO = R1 V CC R1 + R2
VO = 1 V CC 2
5/11
MC3303 - MC3403 - MC3503
APPLICATION INFORMATION (continued) HIGH IMPEDANCE DIFFERENTIAL AMPLIFIER
e1 1/4 MC3403
COMPARATOR WITH HYSTERESIS
1R C
R
R2 V OH
Hysteresis
a R1 R1 1/4 MC3403 b R1 1R C eo
V(ref)
R1 1/4 MC3403 VI
VO
VO V OL
VI H VI L V(ref)
1/4 MC3403 e2
e o = C (1 + a + b) ( e 2 - e 1 ) R
R1 [ VOL-V(re f) ] + V(ref) R1+ R2 R1 VI H = [ VOH-V(ref) ] + V(ref) R1+ R2 R1 H= [ VOH- VOL ] R1+ R2 VI L =
BI-QUAD FILTER
V(re f ) =
R R
1 VCC 2
fO =
1 2 RC
C C1 e
I
C 100k
R1 = QR R2 = R1 TBP
R2 1/4 MC3403 R
R3 = TN R2
1/4 MC3403 100k
C1 = 10C
1/4 MC3403
For :
V(ref) V(ref) Bandpass output R3 R1 R2 R = 160k C = 0.001 F R1 = 1.6M R2 = 1.6M R3 = 1.6M 1/4 MC3403 C1 Notch output V(ref)
f O = 1kHz Q = 10 TBP = 1 TN = 1
Where T BP = Center frequency gain V(ref) T N = Passband notch gain
6/11
MC3303 - MC3403 - MC3503
APPLICATION INFORMATION (continued) FUNCTION GENERATOR
R2 300k
V (ref) = 1 VCC 2 V (ref) 1/4 MC3403
Triangle wave output
R3 75k 1/4 MC3403 Square wave output
R1 100k C V (ref) R f= R1 + R2 4 CR f R1
f
if R3 =
R2 R1 R2 + R1
MULTIPLE FEEDBACK BANDPASS FILTER
C R1 eI C
R3
VCC
1/4 MC3403 CO R2 V (ref) C O = 10C V (ref) = 1 VCC 2
Q * foC R3 R1 = * 2A ( fo ) R1 R5 R2 = 4Q2 R1- R5* R3 =
eo
Given
fo = Center frequency ; choose values fo, C then A (fo) = Gain at center frequency
For less than 10% error from operational amplifier Qofo < 0.1 where fo and BW are expressed in Hz BW If source impedance varies, filter may be preceded with voltage follower buffer to stabilize filter parameters
7/11
MC3303 - MC3403 - MC3503
TYPICAL PERFORMANCE CURVES
8/11
MC3303 - MC3403 - MC3503
PACKAGE MECHANICAL DATA 14 PINS - PLASTIC DIP
Dimensions a1 B b b1 D E e e3 F i L Z
Min. 0.51 1.39
Millimeters Typ.
Max. 1.65
Min. 0.020 0.055
Inches Typ.
Max. 0.065
0.5 0.25 20 8.5 2.54 15.24 7.1 5.1 3.3 1.27 2.54 0.050
0.020 0.010 0.787 0.335 0.100 0.600 0.280 0.201 0.130 0.100
DIP14.TBL
9/11
PM-DIP14.EPS
MC3303 - MC3403 - MC3503
PACKAGE MECHANICAL DATA 14 PINS - PLASTIC MICROPACKAGE (SO)
Dimensions A a1 a2 b b1 C c1 D E e e3 F G L M S
Min. 0.1 0.35 0.19
Millimeters Typ.
Max. 1.75 0.2 1.6 0.46 0.25 45 (typ.)
o
Min. 0.004 0.014 0.007
Inches Typ.
Max. 0.069 0.008 0.063 0.018 0.010
0.5 8.55 5.8 1.27 7.62 3.8 4.6 0.5 4.0 5.3 1.27 0.68 8o (max.) 0.150 0.181 0.020 8.75 6.2 0.336 0.228
0.020 0.334 0.244 0.050 0.300 0.157 0.208 0.050 0.027
10/11
SO14.TBL
PM-SO14.EPS
MC3303 - MC3403 - MC3503
PACKAGE MECHANICAL DATA 14 PINS - THIN SHRINK SMALL OUTLINE PACKAGE
Dim. A A1 A2 b c D E E1 e k l
Millimeters Min. 0.05 0.80 0.19 0.09 4.90 4.30 0o 0.50 0.60 5.00 6.40 4.40 0.65 8o 0.75 0o 0.09 4.50 0.169 1.00 Typ. Max. 1.20 0.15 1.05 0.30 0.20 5.10 0.01 0.031 0.007 0.003 0.192 Min.
Inches Typ. Max. 0.05 0.006 0.039 0.041 0.15 0.012 0.196 0.252 0.173 0.025 8o 0.0236 0.030 0.177 0.20
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. (c) The ST logo is a trademark of STMicroelectronics (c) 1998 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - France - Germany - Italy - Japan - Korea - Malaysia - Malta - Mexico - Morocco The Netherlands - Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A.
ORDER CODE :
11/11

▲Up To Search▲

Price & Availability of MC3503

	To Download MC3503 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .