 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Advanced Data Sheet Product Description The Stanford Microdevices' SLX-2043 is a low noise amplifier module operating in the 1700 - 2500 MHz frequency band. This device has been optimized to serve high linearity basestation applications where a high intercept point is required with low noise figure. The SLX-2043 uses PHEMT device technology, internal bias circuitry, and proven ceramic module technology to yield a high performance product with proven reliability. Internal RF matching is also included on both the input and output to provide an easy to implement, unconditionally stable, 50 ohm circuit block. SLX-2043 1700-2500 MHz High Linearity Low Noise Amplifier Module Noise Figure 2.00 1.75 1.50 1.25 dB 1.00 0.75 0.50 0.25 0.00 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 Frequency (GHz) Product Features * * * * * * NF = 1.1dB IIP3 = +19dBm Gain = 15dB 50 input/output match Single supply operation Applications PCS, TDMA, CDMA, WCDMA receivers Key Specifications Symbol Parameters Frequency Range IIP3 OIP3 NF S21 P1dB S11 S22 VD ID Rthj-c Input Third Order Intercept Point Third Order Intercept Point Noise Figure Small Signal Gain Output Power Input VSWR Output VSWR Device Voltage Device Current Thermal Resistance (junction-case) @ 1dB Compression Power out per tone = 6dBm Power out per tone = 6dBm Test Conditions (ZO=50, T=25C, VD=4V) Unit MHz dBm dBm dB dB dBm -- -- V mA C/W +3.5 90 Min. 1700 +19 +34 1.1 15 20 1.8:1 1.8:1 +4.0 105 60 +4.5 120 1.2 Typ. Max. 2500 The information provided herein is believed to be reliable at press time. Stanford Microdevices assumes no responsibility for inaccuracies or ommisions. Stanford Microdevices assumes no responsibility for the use of this information, and all such information shall be entirely at the user's own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. Stanford Microdevices does not authorize or warrant any Stanford Microdevices product for use in life-support devices and/or systems. Copyright 2000 Stanford Microdevices, Inc. All worldwide rights reserved. 522 Almanor Ave., Sunnyvale, CA 94086 Phone: (800) SMI-MMIC 1 http://www.stanfordmicro.com 03/28/01 rev 8.0 Advanced Data Sheet 6/; 0+] /1$ 0RGXOH Absolute Maximum Ratings Parameters Supply Current Device Voltage Operating Temperature Maximum Input Power Storage Temperature Range Operating Junction Temperature Value 150 5.0 -40 to +85 +17 -65 to +150 +150 Unit mA V C dBm C C Operation of this device above any one of these parameters may cause permanent damage. Bias conditions should also satisfy the following expression: IDVD (max) < (TJ - TOP)/Rth, j-l Pin # 1 Function RF In Description RF input pin. This pin requires the use of an external DC blocking capacitor chosen for the frequency of operation. RF output and bias pin. Bias should be supplied to this pin through an external RF choke inductor. Because DC biasing is present on this pin, a DC blocking capacitor should be used in most applications (see application schematic). The supply side of the bias network should be well bypassed. Connection to ground. For best performance use via holes as shown in recommended PCB layout to reduce inductance and to provide adequate thermal path. Device Schematic RF In RF Out/ DC In 2 RF Out/ Bias 3 Package Backside GND Reference Designators C1, C2 C3 C4 L1 Function DC Blocking Decoupling Decoupling AC Blocking Value 10 pF 220 pF 0.01 uF 47 nH Application Schematic VD C4 C3 L1 50 ohm microstrip 1 2 50 ohm microstrip RF IN C1 RF OUT C2 Package Backside SLX-2043 The information provided herein is believed to be reliable at press time. Stanford Microdevices assumes no responsibility for inaccuracies or ommisions. Stanford Microdevices assumes no responsibility for the use of this information, and all such information shall be entirely at the user's own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. Stanford Microdevices does not authorize or warrant any Stanford Microdevices product for use in life-support devices and/or systems. Copyright 2000 Stanford Microdevices, Inc. All worldwide rights reserved. 522 Almanor Ave., Sunnyvale, CA 94086 Phone: (800) SMI-MMIC 2 http://www.stanfordmicro.com 03/28/01 rev 8.0 Advanced Data Sheet 6/; 0+] /1$ 0RGXOH S21, T = 25C 25 20 15 10 dB 5 0 -5 -10 -15 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 Frequency (GHz) dB 0 -5 -10 -15 -20 -25 -30 -35 -40 -45 -50 0.0 0.5 1.0 S12, T = 25C 1.5 2.0 2.5 3.0 3.5 4.0 Frequency (GHz) S11, T = 25C 0 -5 -10 dB dB 0 -5 -10 -15 -20 -25 -30 S22, T = 25C -15 -20 -25 -30 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 Frequency (GHz) 0 0.5 1 1.5 2 2.5 3 3.5 4 Frequency (GHz) Noise Figure 2.00 1.75 1.50 1.25 dB 1.00 0.75 0.50 0.25 0.00 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 Frequency (GHz) 30.0 1.7 1.8 1.9 dB 38.0 36.0 34.0 32.0 40.0 Output IP3 2.0 2.1 2.2 2.3 2.4 2.5 Frequency (GHz) The information provided herein is believed to be reliable at press time. Stanford Microdevices assumes no responsibility for inaccuracies or ommisions. Stanford Microdevices assumes no responsibility for the use of this information, and all such information shall be entirely at the user's own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. Stanford Microdevices does not authorize or warrant any Stanford Microdevices product for use in life-support devices and/or systems. Copyright 2000 Stanford Microdevices, Inc. All worldwide rights reserved. 522 Almanor Ave., Sunnyvale, CA 94086 Phone: (800) SMI-MMIC 3 http://www.stanfordmicro.com 03/28/01 rev 8.0 Advanced Data Sheet 6/; 0+] /1$ 0RGXOH Part Number Ordering Information Caution: ESD Sensitive Appropriate precaution in handling, packaging and testing devices must be observed. Part Number SLX-2043 Reel Size TBD Devices/Reel TBD Part Symbolization The part will be symbolized with a "TBD" marking designator on the top surface of the package. Package Dimensions ("43" package) 2.43 Pin # 1 2 Function RF In 6.9 0.375 RF out/V RF Input 10 All dimensions in mm Denotes Pin 1 Test PCB Pad Layout 0.40" Pkg Outline All plated thru holes: 0.020" dia The information provided herein is believed to be reliable at press time. Stanford Microdevices assumes no responsibility for inaccuracies or ommisions. Stanford Microdevices assumes no responsibility for the use of this information, and all such information shall be entirely at the user's own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. Stanford Microdevices does not authorize or warrant any Stanford Microdevices product for use in life-support devices and/or systems. Copyright 2000 Stanford Microdevices, Inc. All worldwide rights reserved. 522 Almanor Ave., Sunnyvale, CA 94086 Phone: (800) SMI-MMIC 4 3.45 6/; RF Output 0.6 http://www.stanfordmicro.com 03/28/01 rev 8.0 |
Price & Availability of SLX-2043
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |